Français
Deutsch
Italiano
Español
LIQUID SLIP STONEWAR & PORCELAIN EASP01LL WHITE 1KG
White stoneware & porcelain engobe - EASP01LL
Liquid slip in 1kg
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
LIQUID SLIP STONEWAR & PORCELAIN EASP01L WHITE 250GR
White stoneware & porcelain engobe - EASP01L
Liquid in 250gr
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
ENGOBE GRES & PORCELAIN EASP01 WHITE
White stoneware & porcelain engobe - EASP01
Powder
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Stoneware & porcelain engobe base to color - EASP00
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips:
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Transparent glaze Emerald green E89283
Advice :
Temperature of firing : 960-1040°C
Mentions :
GROUPE III
Presence of lead. Use only for decorative production
Eggplant transparent enamel - E68005
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Red Coral E63042/1
Glazes for stonewares and porcelains.
GROUPE I
Firing temperature: 1250-1300°C
Light orange
Ref : E63041/1
Lustre orange crimson "Aventurine"- E21017/87
GLAZE WITH EFFECT E21017/83 LUSTER GREGE AVENTURINE WITHOUT LEAD
Lustre grege "Aventurine
Ref : E21017/83
GLAZE WITH EFFECT E21017/82 LUSTER ORANGE AVENTURINE WITHOUT LEAD
Lustre orange "Aventurine"
Ref : E21017/82
BEIGE LUSTER AVENTURINE GLAZE UNLEADED E21017/81
Lustre "Aventurine"
Ref : E21017/81
GLAZE WITH EFFECT E21017/78 LUSTER BROWN PURPLE AVENTURINE WITHOUT LEAD
Lustre crimson "Aventurine"
Ref : E21017/78
LUSTER AVENTURINE GLAZE UNLEADED E21017/73
Lustre crimson "Aventurine"
Ref : E21017/73
GLAZE WITH EFFECT E21017/71 LUSTER ORANGE AVENTURINE WITHOUT LEAD
Lustre orange "Aventurine"
Ref : E21017/71
BLACK LUSTER AVENTURINE GLAZE UNLEADED E21017/69
Lustre black "Aventurine"
Ref : E21017/69
Luster orange "Aventurine"- E21017/60
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Luster crimson "Aventurine"- E21017/51
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Lustre orange crimson "Aventurine"- E21017/50
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Lustre black "Aventurine"- E21017/46
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
UNIVERSAL THINNER FOR GOLD, LUTRE, BRUSH CLEANING DILD75
Melting N°20 Melting without lead for série P
GROUPE I
Firing temperature: 900-950°C
Decor flux5 melting for serie P - DFLUX5
GROUPE II
Firing temperature: 900-950°C
Coefficient of expansion: 71
Matt black opaque enamel - CSM 117
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt water green opaque enamel - CSM 112
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Opaque glaze with effect Chattered cream CS6040
Advice :
Temperature of firing : 980-1020°C
Dilation coeff 25-300°C : 62
Mentions :
Presence of lead. Possibility to use for alimentary production under conditions
Blue green CS476
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Vermilion red CS475
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Andalusian green CS466
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Light brown CS464
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Deep grey CS455
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980C
Black CS451
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Turquoise CS450
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Cobalt blue CS449
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
