Decor flux5 melting for serie P - DFLUX5
GROUPE II
Firing temperature: 900-950°C
Coefficient of expansion: 71
Matt black opaque enamel - CSM 117
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Matt water green opaque enamel - CSM 112
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Opaque glaze with effect Chattered cream CS6040
Advice :
Temperature of firing : 980-1020°C
Dilation coeff 25-300°C : 62
Mentions :
Presence of lead. Possibility to use for alimentary production under conditions
Blue green CS476
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Vermilion red CS475
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Andalusian green CS466
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Light brown CS464
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Deep grey CS455
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980C
Black CS451
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Turquoise CS450
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Cobalt blue CS449
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II