Français
Deutsch
Italiano
Español
Lead free parrot green cadmium enamel - EECS 09
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free brown cadmium enamel - EECS 08
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free cinnamon brown cadmium enamel - EECS 07
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free Burgundy red cadmium enamel - EECS 06
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free marsala red cadmium enamel - EECS 05
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free red poppy cadmium enamel - EECS 04
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free cardinal red cadmium enamel - EECS 03
Cadmium selenium effect, bright red.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free orange cadmium enamel - EECS 02
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free gold button cadmium enamel - EECS 01
Cadmium selenium effect, dark yellow.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Eggplant transparent enamel - E68005
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Lustre orange crimson "Aventurine"- E21017/87
GLAZE WITH EFFECT E21017/83 LUSTER GREGE AVENTURINE WITHOUT LEAD
Lustre grege "Aventurine
Ref : E21017/83
GLAZE WITH EFFECT E21017/82 LUSTER ORANGE AVENTURINE WITHOUT LEAD
Lustre orange "Aventurine"
Ref : E21017/82
BEIGE LUSTER AVENTURINE GLAZE UNLEADED E21017/81
Lustre "Aventurine"
Ref : E21017/81
GLAZE WITH EFFECT E21017/78 LUSTER BROWN PURPLE AVENTURINE WITHOUT LEAD
Lustre crimson "Aventurine"
Ref : E21017/78
LUSTER AVENTURINE GLAZE UNLEADED E21017/73
Lustre crimson "Aventurine"
Ref : E21017/73
GLAZE WITH EFFECT E21017/71 LUSTER ORANGE AVENTURINE WITHOUT LEAD
Lustre orange "Aventurine"
Ref : E21017/71
BLACK LUSTER AVENTURINE GLAZE UNLEADED E21017/69
Lustre black "Aventurine"
Ref : E21017/69
Luster orange "Aventurine"- E21017/60
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Luster crimson "Aventurine"- E21017/51
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Lustre orange crimson "Aventurine"- E21017/50
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Lustre black "Aventurine"- E21017/46
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Decor flux5 melting for serie P - DFLUX5
GROUPE II
Firing temperature: 900-950°C
Coefficient of expansion: 71
Matt black opaque enamel - CSM 117
This is a collection of matt colored enamels prepared for the "cuerda seca" technique.
CSM-100 series matt enamels for cuerda seca can be used for white and red paste.
The recommended firing temperature is 980ºC-1000ºC.
Opaque glaze with effect Chattered cream CS6040
Advice :
Temperature of firing : 980-1020°C
Dilation coeff 25-300°C : 62
Mentions :
Presence of lead. Possibility to use for alimentary production under conditions
Blue green CS476
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Vermilion red CS475
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Andalusian green CS466
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Light brown CS464
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Turquoise CS450
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Cobalt blue CS449
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Blue CS447
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Green CS446
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Orange CS437
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Red CS435 glaze
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Blue sky CS433
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing Temperature : 980°C
GROUPE II
CUERDA SECA
Lilac CS423
This is a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together except Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Cream CS417
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe.
Colors are used deluted with water to obtain a thick mix.
CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Firing temperature : 980°C
GROUPE II
Yellow - CS 402
Series of special colors for the “Cuerda Seca” technique or cloisonné enamels.
All the colors are miscible with each other.
We also include the references F-4312 Black and F-4313, mixtures to trace the partition.
The CS-400 series is recommended for white paste.
The recommended firing temperature is 980°C.
Opaque orange cadmium enamel - CS 220
For the enameling of ceramic pieces on white and red clay.
Recommended firing temperature, between 960-980ºC.
Ochre - CS 218
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Marble - CS 217
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
English green - CS 216
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
White - CS 215
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Cobalt blue - CS 214
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Dark brown - CS 213
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Light brown - CS 212
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Red - CS 210
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Victoria green - CS 209
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Green - CS 208
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Yellow - CS 207
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Blue - CS 206
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Light brown - CS 205
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Purple - CS 204
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Yellow - CS 203
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Black - CS 202
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Eggplant - CS 201
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Turquoise blue - CS 200
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Transparent glaze - C551
Composed of Frit.
Transparent for general use, both for red earthenware and for white tiles and majolica.
Develops very well the whole range of colors.
The firing temperature varies between 980-1050ºC.
Lead bisilicate enamel - BIS PB
Composed of Frit.
Transparent glaze with lead.
For glazing ceramic pottery and artistic pieces in white or red clay.
It can be used in monocuisson. Recommended firing temperature, between 950-1000ºC.
BASE5 RAKU GLAZE BORO ALCALINA
Base boro alcaline transparente BASE 5
BASE4 RAKU GLAZE LEAD ALCALINA
Firing temperature: 800-900°C
Deep yellow A135
Cadmium glaze with lead
Temperature of firing 960-1020°C
Cadmium yellow enamel - A 133 / N
For enamelling ceramic pieces in red or white clay.
Firing temperature between 950-1020°C.
Black liquorice cracked - 5942 (ex E31018/12 )
Opaque glaze without lead.
Temperature of firing 980°C
Brown camel cracked - 5940 (ex E-31018/10 )
Opaque glaze without lead.
Temperature of firing 980°C
Brown auburn cracked - 5940
Opaque glaze without lead.
Temperature of firing 980°C
Blue "duck"cracked - 5939 (ex E31018/9 )
Opaque glaze without lead.
Temperature of firing 980°C
Blue sky cracked - 5938 (ex E31018/8 )
Opaque glaze without lead.
Temperature of firing 980°C
Blue celestial cracked - 5937 (ex E31018/7 )
Opaque glaze without lead.
Temperature of firing 980°C
Dark purple cracked - 5936 (ex E31018/6 )
Opaque glaze without lead.
Temperature of firing 980°C
Green "parrot" cracked - 5935 (ex E31018/5 )
Opaque glaze without lead.
Temperature of firing 980°C
Blue "king" cracked - 5934 (ex E31018/4 )
Opaque glaze without lead.
Temperature of firing 980°C
Red cracked-5933 (ex E31018/3 )
Opaque glaze without lead.
Temperature of firing 980°C
Red grenadine cracked - 5932 (ex E31018/2 )
Opaque glaze without lead.
Temperature of firing 980°C
Yellow lemon cracked - 5931
Opaque glaze without lead.
Temperature of firing 980°C
Lustre platine ( Ex E-11050/38)
GROUPE III
Firing temperature: 850-990°C
Antique ivory white enamel - 5894
Opaque lead free.
For glazing red or white earthenware.
Develops colors very well.
The firing temperature varies between 950 and 1020°C.
Satin transparent glaze - 5888
Without lead.
For enamelling ceramic pieces in red or white clay.La température de cuisson conseillée est de 980°C.
The recommended firing temperature is 980°C.
Matt white opaque enamel - 5880
For glazing red or white earthenware.
Develops colors very well.
The firing temperature varies between 940-1050°C.
Green pistachio transparent enamel - 5868
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Luster 5841
Advice :
Firing temperature : 980-990°C
Mentions :
Presence of lead. Use only for decorative production
Lustre 5839
Avice :
Firing temperature : 980-990°C
Mentions :
Presence of lead. Use only for decorative production
Lustre 5834
Temperature for firing : 850-1000°C
Presence of lead. Use only for decorative production
Burgundy wine transparent enamel - 5762/F
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Red 5747 ( In replacement of E921047)
Firing temperature:960-980°C
Mentions :
Presence of lead. Use only for decorative production
Red transparent enamel - 5658
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
GLAZE EFFECT OPAQUE 5656 BLUE LEATHER
Blue leather
Ref : 5656
Coloured effects glaze without lead
Temperature of firing : 960-1020°C
Dotted leather 5655
Coloured opaque glaze without lead
Temperature of firing : 960-1020°C
GLAZE EFFECT OPAQUE 5654 LEATHER LIGHT GREEN
Light green leather
Ref : 5654
Coloured opaque glaze without lead
Temperature of firing : 960-1020°C
GLAZE EFFECT OPAQUE 5653 LEATHER GREEN
Green leather
Ref : 5653
Coloured bright opaque glaze without lead
Temperature of firing : 960-1020°C
LIGHT LEATHER OPAC EFFECTS GLAZE 5652 / M
Light leather
Ref : 5652
Opaque glaze with effects without lead
Temperaure of firing : 960-1020°C
Orange transparent enamel - 5651
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Tomato red transparent enamel - 5650
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
GLAZE EFFECT OPAQUE 5649 LEATHER BLUE/BROWN
Blue/brown leather
Ref : 5649
Opaque glaze with effects
Without lead
Temperaure of firing : 960-1020°C
GLAZE EFFECT OPAQUE 5628NE LEATHER BROWN
Brown leather
Ref : 5628NE
Opaque glaze with effects
Without lead
Temperature of firing : 960-1020°C
GLAZE EFFECT OPAQUE 5628 BROWN LEATHER
Brown leather 5628 /NE
Opaque glaze with effects
Without lead
Temperature of firing : 960-1020°C
Red torero transparent enamel - 5613
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Cognac transparent enamel - 5600.
For enamelling parts in red or white clay.
For single-fired enamelling, add glue.
Recommended firing temperature between 980-1050ºC.
Passion blue transparent enamel - 5596
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
