Français
Deutsch
Italiano
Español
Bisqueware pressed tile white-cream earthenware - BISCFBC100X100
Alumina ball 40mm - IL40
Milling ball
For cylindrical jar
Quality 92% alumina
Ask for 99.7% and 99.9% alumina
ALUMINA BALL Ø 30MM LE KG
Alumina ball 30mm - BILALU30
Milling ball
Alumina ball 92% for cylindrical jar
Ask for 99.7 % or 99.9 % alumina
Alumina ball 25mm - BIL25
Milling ball
92% alumina
Ask for 99.7% or 99.9% alumina
Alumina ball's diam 18mm
Milling ball
Alumina 92%
ALUMINA BALLS Ø 1MM PER KG
Ref : BILALU1
Diameter 1mm - Sold by the kg
92% alumina
Milling ball
Castable 1300 ° C max
Powder product ready for shaping concrete slab.
Taken ceramic supperior temperature to 1300 ° C.
Base material: + grog + lime slurry.
25 kg bag
REINFORCING REFRACTORY WASHER Ø 100 X 10 MM THICK
Bearing ring are used in combination with cuplock CDR or CFF to increase the holding surface of the cuplock on the fiber.
Ceramic kiln for pottery product.
Model BENJAMIN-4G 75 liters 1300°C en 230 V 1 phase 50 Hz.
Refractory Coating JM26 1430 ° C 60mm + 90mm board 1260 ° C. Total: 150mm insulation.
Ceramic kiln front-loading Benjamin-3G 51 liters completely in stainless steel Max temp 1300°C Volt 220V single phase
Ceramic electric kiln front-loading 1300°C completely in stainless steel Benjamin-2G 34 liters 1300°C 220V single phase 50Hz
Electric kiln Benjamin-1G 11 liters in stainless steel 1300°C 220V front-loading
Electric kiln for ceramic and pottery.
Model Benjamin-1G 11 liters completely in stainless steel 1300°C 220V front-loading
Benjamin-11 liters it's for tests and laboratory use.
Pottery ceramic product.
Electric kiln Benjamin 5G stainless steel 110 liters 1300 ° C 230V single phase 50 Hz (option trifasic)
OIL POURING SPOUT CAP VALVE
Oil spout with valve clap - BECCLA
6407 Blue of Sèvres
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
PIGMENT BITUMEN OF JUDEE "6272"
6272 Bitumen of Jude
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
Porcelain type Bone China for casting - BC10C
Price displayed by kilo
In atomized powder.
Deflocculant incorporated.
For 100 kg of powder /
Add approximately 35-40 L of water and 0.1 ml of sodium silicate.
Density to be obtained: 1700-1760 gr/m3
Ford Slice Viscosity #4: 45 to 75 seconds
Corundum stick for polishing cutting edges of enamel - BATCOR
Soft abrasive stone for earthenware pieces.
22 x 50 x 200 mm
Used for cleaning up stilt marks and bisqueware.
With this Stone, you can remove unsighly lines and marks left after firing within seconds.
Carbide stick for polishing cutting edges of enamel - BATCAR
Abrasive stone for stoneware and porcelain pieces.
22 x 50 x 200 mm
Used for cleaning up stilt marks and bisqueware.
With this Stone, you can remove unsighly lines and marks left after firing within seconds.
BASE5 RAKU GLAZE BORO ALCALINA
Base boro alcaline transparente BASE 5
