ELECTRIC OVEN MODEL DELTA BRICK INSULATION 210 L 1320°C
Sole fixed-charge of batch Front / Cover all brick.
MOBILE DELAYER FOR GLAZE AND BARBOTINE 55 L - DELAYRS5498
ENAMEL AND SLIP MIXER 200 KG
Ref : DELAYR6037
Electric mixer Xo6M for casting and glaze, power 1600W - 20442
Power 1600W in 220 V
Electronic speed variator, + 2 mechanical speed
Rapid ( low couple), slow ( hard couple)
Rotation speed N°1: 150 to 450 tours/minute
Rotation speed N°2: 300 à 620 tours/minute
for product of density until 2.2 kg/l
Weight: 6.8 kg
Steel propeller : lenght 600 mm Ø turbine: 120 mm
Joint turbine M14
Product capacity from 20 to 40 kg or 90 liters maxi
Small electric mixer for glaze and casting, power 1010W
Power 1010 W in 220 v
Electronic speed variator
Speed rotation from 360 to 680 tours/minutes for products of density until 1.8 kg/l
Weight: 4.5 kg
Steel propeller : lenght 600 mm Ø turbine 120 mm
Joint turbine M14
Product capacity: from 10 to 15 kg or maxi 30 liters
Deferrissor: filter magnet in inox -MOD93 CER
Glaze depollution's system ( pollution by iron oxide)
Filter to be installed on the glaze or barbotine's supply of a gun.
Powe r 12,000 GAUSS connector in 1" ( 1 entrance and 1 exit)
SERIFIX Fixative for decoration on unfired glaze
Ref : DECAN
DURCI'DUR® Anise green Classic Range - DDV1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® Red Classic Range - DDR5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® Red Classic Range - DDR10
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® Red Classic Range - DDR1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® Golden yellow Classic Range - DDJ1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
Chocolate natural self hardening clay : "DURCI'DUR"
Ref : DDECH1.5
For children upper 3.
Do not stain hands.
No firing is necessary. It dries in 48h around with room temperature conditions.
Realisations are schock resistant.
Do not fire, do not glaze.
DURCI'DUR® Lavander blue Classic Range - DDBL1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® White Classic Range - DDB5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® White Classic Range - DDB10
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DURCI'DUR® White Classic Range - DDB1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
DIGITAL PORTABLE LABORATORY SCALE 5000 G / 2 G
Maximum range 5000 g / Accuracy 2 g - DCT5000
DIGITAL PORTABLE LABORATORY SCALE 200 G / 0.1 G
Maximum range 200 g / Precision 0,1 g - DCT201
DIGITAL PORTABLE LABORATORY SCALE 2000 G / 1 G
Maximum range 2000 g / Accuracy 1 g - DCT2000
D99 SUNSHINE YELLOW PIGMENT DYE
Sunshine yellow
Ref : D99
COLORS TO BE PAINTED D SERIES Our D series from Solargil is a range of very fine coloring oxides with flux incorporated in the formula.
Miscible with each other to vary the shades, they can be used under glaze or on enamel, and can also be used to color enamels: between 4 and 9% in a transparent base and between 6 and 15% in a white base.
Tips:
Firing temperature 950-1250°C
Formula: Zr-Si-Co-Ni
Red orange D98
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1050°C
Formula: Zr-Cd-Se-Pr-Si
Green persian D96
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1050°C
Formula: Co-Pr
Green vanadium D95
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Si-Pr-V
Brown D92
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1050°C
Formula: Zr-Si-Fe
Deep brown D91
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zn-Cr-Fe
Bamboo yellow D90
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Sn-V
Blue Bermuda D89
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al-V-Co-Cr-Fe-Ni-Mn
Blue of France D87
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Co-Si-Al-Zr
Green mint D80
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al-V-Pr
Black D79
COLOR D79 BLACK
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it. Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Cr-Fe-Co-Ni-Mn-Zn-Si
Light pink D77
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al-Zn-Cr-Fe-Pr
Ocean green D74
COLOR D74 OCEAN GREEN
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-V-Pr-Al
Copper ochre D72
COLOR D72 COPPER OCHRE
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al-Zn-Cr-Fe