Français
Deutsch
Italiano
Español
There are no more items in your cart
Ref :
CABLTHER.14
Brand:
N/A
LEAD FOR 1400°C S TYPE THERMOCOUPLE THE LINEAR METER
Compensating cable shielded probe S type 1400 ° C - the ml
Ref : CABLTHER.14
Ref :
CABLTHER.12
Brand:
N/A
CABLE THERMOCOUPLE COMPENSATING 1200°TYPE K
Compensating cable shielded K probe Type K 1200 ° C - the ml
Ref : CABLTHER.12
Ref :
CABLEINOX
Brand:
N/A
SMALL STAINLESS STEEL SHEATHED CABLE IN 0.7 MM - PER M
Ref : CABLEINOX
Ref :
CABINERS5205
Brand:
N/A
Ref :
CABINECPP
Brand:
N/A
SPRAY BOOTH CPP DRY FILTER
Constructed of galvanized steel and coated with epoxy paint.
Cabin light to put on a table.
Ref :
CABINECPG
Brand:
N/A
SPRAY BOOTH CPG DRY FILTER
Constructed of galvanized steel and coated with epoxy paint.
Cabin mounted on feet.
Ref :
CABINECPA5PMINOX
Brand:
N/A
SPRAY BOOTH CPA5PMINOX STAINLESS STEEL
Wet back spray booth stainless steel model narrow (CPA-PM 700mm).
The water wash spray booth works on a curtain of continuously, recycled water running down the rear face of the spray booth.
A glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan.
The glaze in trapped by the water curtain, whist the air stream is pulled through the booth and into a stainless steel pre-filter and finally into a washable filter bag.
Ref :
CABINECPA5INOX
Brand:
N/A
SPRAY BOOTH CABIN CPA5 STAINLESS STEEL
SOLARGIL Wet Back Spray Booth CPA5
The CPA5 spraybooth has been designed to meet the ever increasing need to protect our environment.
The water Wash spraybooth works on the principle of a curtain of continuous recycling water running down the rear face of the spraybooth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable pre filter and finally then outside building.
Ref :
CABINECPA2RECY
Brand:
N/A
STAINLESS STEEL SPRAY BOOTH WITH 2 TANKS WITHOUT EXTERNAL EXTRACTION CPA2- RECYCLE
Staintess steel spray booth with 2 tanks without external extraction.
2 Waters tanks from 60 liters.
Ref :
CABINECPA2INOX
Brand:
N/A
SPRAY BOOTH CABIN CPA2 STAINLESS STEEL WITH 2 BASINS
Wet back spray booth stainless steel with 2 basins (100 liters).
Ref :
CABINECPA1000
Brand:
N/A
SPRAY BOOTH STAINLESS STEEL CPA1000 BIG MODEL
Wet back spray booth stainless steel CPA -1000 for ceramic use
The water wash spray booth works on a curtain of continuously, recycled water running down the rear face of the spray booth.
A glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan.
The glaze in trapped by the water curtain, whist the air stream is pulled through the booth and into a stainless steel pre-filter and finally into a washable filter bag.
Out-of-Stock
Out-of-Stock
Ref :
C-65
Brand:
N/A
Glaze claws steel with spring-loaded - C-65
Out-of-Stock
Ref :
C551
Brand:
N/A
Transparent glaze - C551
Composed of Frit.
Transparent for general use, both for red earthenware and for white tiles and majolica.
Develops very well the whole range of colors.
The firing temperature varies between 980-1050ºC.
Out-of-Stock
Ref :
C34
Brand:
N/A
Coiled ribbon tools set H 20 cm
Ref : C34
Out-of-Stock
Ref :
C-300
Brand:
N/A
Stainless steel glaze claws L. 300 mm spring loaded - C-300
Ref :
C-220
Brand:
N/A
Stainless steel glaze claws L. 250 mm spring loaded - C-220
Ref :
C.M.C
Brand:
N/A
C.M.C CARBOXYMETIHYL (sodium cellulose)
C.M.C carboxymethylcellulose sodique
Ref :
BZN
Brand:
N/A
6141 White of Zinc
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
Ref :
BUSEPERF2.5A4.5
Brand:
N/A
NOZZLE FOR PERFEKT4 ENAMELLING GUN WITH FLAT JET FROM 2.5 TO 4.5 MM AT CHOICE
Nozzle from 2,5 to 4,5 mm (call) for spraygun PERFEKT4
Last items in stock
Ref :
BUSEPERF1A2.2
Brand:
N/A
NOZZLE FOR PERFEKT4 GLAZING GUN FOR FLAT JET FROM 1 TO 2.5 MM
Nozzle from 1,0 to 2,2 mm (call) for spraygun PERFEKT4
Ref :
BUSEMIGNON
Brand:
N/A
NOZZLE FOR MIGNON3 ENAMELLING SPRAYGUN FROM 0.2 TO 2 MM
Nozzle form 1.0 to 2,0 mm (call) for spraygun SMPL.
Ref :
BUSEKSMPL2.5A3
Brand:
N/A
SPRAY GUN NOZZLE SMPL FOR FLAT JET FROM 2.5 TO 3 MM AT CHOICE
Nozzle from 2,5 to 3.0 mm (call) for spraygun SMPL
Ref :
BUSEKSMPL1A2
Brand:
N/A
NOZZLE FOR SMPL ENAMELLING SPRAYGUN FOR FLAT JET 1 TO 2 MM AT CHOICE
Nozzle form 1.0 to 2,0 mm (call) for spraygun SMPL.
Last items in stock