PROMO FIN DE STOCK

Provencal green enamel - 5583

For enamelling ceramic pieces in red or white clay.

Firing temperature between 980-1050°C.

Red transparent enamel - 5551

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Transparent honey amber enamel for FE-R - 5465

Glossy transparent enamel, honey.

For enamelling ceramic pieces in red or white clay.

Firing temperature, between 960-1050ºC.

GLAZE 5301N TRANSPARENT HONEY

Transparent glaze Honey 5301N

Blue sky 5266

Coloured bright transparent glazes usable on red or white clay.
Temperature of firing 960-1040°C

GROUPE II with lead

Chattered green 5135

Coloured bright opaque glazes with effects usable on red or white clay.
Temperature of firing 960-1020°C

Groupe II with lead

Red scarlet XP3212/T

Free of lead

GROUPE I
Temperature of firing : 930-1050°C

Smooth English Imperial Porcelain - IMPPO

Stoneware tone stone porcelain grog 30% 0,0-2 - GTPP

Groleg

Smooth culinary refractory red earthenware - FER

Deep green VR99

Cadmium glaze with lead
Temperature of firing 950-1050°C

Transparent without lead glaze - PR02

FiringTemperature : 1100-1200°C

Coefficient of expansion: 64

GROUPE I : Enamel without lead

Orange - P34F

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Firing température 950-1200°C

Formula: Ti-Cr-Sb

COLORANT SIGLO ORANGE P190F

Orange - P190F

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century. The fondant is already included in the mix. Appliance with brush or in serigraphy

GLAZE LUSTRER N3320 M/4 BRIGHT BLACK

Bright black

Ref : N3320M/4

Lustrer glazes with lead

Advice :

Temperature of firing : 980-990°C

Mentions :

Presence of lead. Use only for decorative products

Copper red N3035

Lustre glazes with lead

Advice :

Temperature of firing : 980-990°C

Mentions :

Presence of lead. Use only for decorative products

Sunny deep orange M7514

Cadmium glaze with lead
Temperature of firing 960-1050°C

British Imperial Porcelain in Micronized Powder for Casting - IMPPOC

Price shown per kilo

GLAZE GE314 BLUE COBALT TRANSPARENT. BIG THICKNESS. WITH LEAD

Blue cobalt

Ref : GE314

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE313 BLUE ELECTRIC TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue electric 

Ref : GE313

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE312 BLUE SKY TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue sky

Ref : GE312

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE311 GREEN BOTTLE TRANSPARENT. BIG THICKNESS. WITH LEAD

Ceramic glaze Green bottle

Ref : GE311

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE310 GREEN GRASS TRANSPARENT. BIG THICHNESS. WITH LEAD

Green grass

Ref : GE310

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE309 BLUE AQUAMARINE TRANSPARENT. BIG THICKNESS. WITH LEAD

Aquamarine

Ref : GE309

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE308 BLEU TURQUOISE BLUE TRANSPARENT. BIG THICKNESS. WITH LEAD

Turquoise blue

Ref : GE308

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Transparent glaze grey -GE306

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperat

Transparent glaze crimson - GE305

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C</

GLAZE GE304 AUBERGINE TRANSPARENT. BIG THICKNESS. WITH LEAD

Transparent glaze aubergine

Ref : GE304

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE303 BORDEAUX TRANSPARENT. BIG THICKNESS. WITH LEAD

Transparent glaze bordeaux

Ref : GE303

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C<

GLAZE GE302 BROWN HAZELNUT TRANSPARENT. BIG THICKNESS. WITH LEAD

Transparent glaze brown hazelnut

Ref : GE302

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1

GLAZE GE301 YELLOW STRAW TRANSPARENT. BIG THICKNESS. WITH LEADBEUX

Transparent glaze yellow  straw

Ref : GE301

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 12

Transparent glaze - GE300

Transparent glaze "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Smooth extra white Paris stoneware with atomized kaolin powder for casting

- GBPARISC

Manganese brown F4352

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Advice :

Température 950-1200°C

Formula: Sn-Ca-Si-Cr-Mn

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Firing température 950-1200°C

Formula: Cu-Zr-Si-Pr

Brown F4350

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Advice :

Température 950-1200°C

Formula: Cr-Fe-Zn-Sn-Ca-Si-Ni

Deep cobalt blue F4343

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century. The fondant is already included in the mix. Appliance with brush or in serigraphy

Firing temperature: 950-1250°C

Formula: Co-Si-Al

Orange yellow D21/N

Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing Température : 950-1120°C

Formula: Sb-Al

Parma CSM120

Matt dark pink satin opaque enamel - CSM 119

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt light pink opaque enamel - CSM 118

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt cobalt blue opaque enamel - CSM 116

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Blue duck CSM114

Matt pistachio green opaque enamel - CSM 113

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt light brown opaque enamel - CSM 110

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Brown CSM109

Matt light gray opaque enamel - CSM 108

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Beige CSM107

Crimson CSM106

Matt red opaque enamel - CSM 105

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt intense orange opaque enamel - CSM 104

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Orange clear - CSM103

Firing temperature: 980-1020°C

GROUPE II

Yellow Orange CSM102

In powder

With lead

Matt fluorescent yellow opaque enamel - CSM 101

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Blue lustre 5855

Advice :

Firing temperature : 980-990°C

Mentions :

Presence of lead. Use only for decorative production

Deep red 5783

Gold pink 5757 N

Advice :

Temperature of firing : 980-1000°C

Mentions :

GROUPE I

Free of lead

Light brown 5737

Transparent glaze without lead

Advice :

Temperature of firing : 980-1050°C

Mentions :

GROUPE I

Free of lead

Deep red 5726 Glaze

Transparent glaze without lead

Advice :

Temperature of firing : 980-1050°C

Mentions :

GROUPE I

Free of lead

Deep brown 5717

Opaque glaze without lead
Temperaure of firing : 980-1050°C

GLAZE 5716 LIGHT BROWN OPAQUE WITHOUT LEAD

Light brown

Ref : 5716

Opaque glaze without lead
Temperaure of firing : 980-1050°C

PARMA OPAC GLAZE UNLEADED :  5704

Parma 5704

YELLOW OPAC UNLEADED : 5701

Yellow 5701

SUNFLOWER YELLOW TRANSPARENT GLAZE 5683

Transparent glaze Yellow "sunflower" - 5683

Glaze Coral 5668 crackle

Bright transparent coloured glaze

Advice :

Temperature of firing : 960-1020°C

Mentions :

Presence of lead. Use only for decorative production

Semi opaque green transparent enamel - 5625

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Red transparent enamel for undercoat- 5590

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Mediterranean blue transparent enamel - 5548

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Green provencal transparent enamel - 5547

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Salmon transparent enamel - 5545

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Daffodil transparent enamel - 5544

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Red transparent enamel - 5498

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Transparent glaze Blue 5479

Bright transparent coloured glaze.
Temperature of firing : 960-1040°C
Presence of lead - do not use for alimentary pieces

GROUPE III With lead

Intense blue 5428

Bright opaque coloured glaze
Temperature of firing : 960-1020°C
Coeff dilat 25-300°C: 65
Presence of lead - do not use for alimentary pieces

Groupe III with lead

Yellow 5298 opaque

Coloured bright transparent glazes usable on red or white clay.
Temperature of firing 960-1020°C

Groupe II

Blue 5273 / N

Coloured bright transparent glazes usable on red or white clay.
Temperature of firing 960-1020°C

Groupe III with lead

Brown 5246

Coloured bright opaque glazes usable on red or white clay.
Temperature of firing 960-1020°C
Coeff dilat 25-300°C: 63

Groupe II with lead

Pink 5115

Coloured bright transparent glazes usable on red or white clay.
Temperature of firing 960-1020°C

Goupe II with lead