PROMO FIN DE STOCK

Smooth English Imperial Porcelain - IMPPO

Stoneware tone stone porcelain grog 30% 0,0-2 - GTPP

Groleg

Smooth culinary refractory red earthenware - FER

Deep green VR99

Cadmium glaze with lead
Temperature of firing 950-1050°C

Transparent without lead glaze - PR02

FiringTemperature : 1100-1200°C

Coefficient of expansion: 64

GROUPE I : Enamel without lead

Orange - P34F

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Firing température 950-1200°C

Formula: Ti-Cr-Sb

COLORANT SIGLO ORANGE P190F

Orange - P190F

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century. The fondant is already included in the mix. Appliance with brush or in serigraphy

GLAZE LUSTRER N3320 M/4 BRIGHT BLACK

Bright black

Ref : N3320M/4

Lustrer glazes with lead

Advice :

Temperature of firing : 980-990°C

Mentions :

Presence of lead. Use only for decorative products

Copper red N3035

Lustre glazes with lead

Advice :

Temperature of firing : 980-990°C

Mentions :

Presence of lead. Use only for decorative products

Sunny deep orange M7514

Cadmium glaze with lead
Temperature of firing 960-1050°C

British Imperial Porcelain in Micronized Powder for Casting - IMPPOC

Price shown per kilo

GLAZE GE314 BLUE COBALT TRANSPARENT. BIG THICKNESS. WITH LEAD

Blue cobalt

Ref : GE314

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE313 BLUE ELECTRIC TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue electric 

Ref : GE313

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE312 BLUE SKY TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue sky

Ref : GE312

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE311 GREEN BOTTLE TRANSPARENT. BIG THICKNESS. WITH LEAD

Ceramic glaze Green bottle

Ref : GE311

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE310 GREEN GRASS TRANSPARENT. BIG THICHNESS. WITH LEAD

Green grass

Ref : GE310

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE309 BLUE AQUAMARINE TRANSPARENT. BIG THICKNESS. WITH LEAD

Aquamarine

Ref : GE309

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE308 BLEU TURQUOISE BLUE TRANSPARENT. BIG THICKNESS. WITH LEAD

Turquoise blue

Ref : GE308

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Transparent glaze grey -GE306

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperat

Transparent glaze crimson - GE305

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C</

GLAZE GE304 AUBERGINE TRANSPARENT. BIG THICKNESS. WITH LEAD

Transparent glaze aubergine

Ref : GE304

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE303 BORDEAUX TRANSPARENT. BIG THICKNESS. WITH LEAD

Transparent glaze bordeaux

Ref : GE303

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C<

GLAZE GE302 BROWN HAZELNUT TRANSPARENT. BIG THICKNESS. WITH LEAD

Transparent glaze brown hazelnut

Ref : GE302

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1

GLAZE GE301 YELLOW STRAW TRANSPARENT. BIG THICKNESS. WITH LEADBEUX

Transparent glaze yellow  straw

Ref : GE301

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 12

Transparent glaze - GE300

Transparent glaze "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Smooth extra white Paris stoneware with atomized kaolin powder for casting

- GBPARISC

Manganese brown F4352

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Advice :

Température 950-1200°C

Formula: Sn-Ca-Si-Cr-Mn

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Firing température 950-1200°C

Formula: Cu-Zr-Si-Pr

Brown F4350

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Advice :

Température 950-1200°C

Formula: Cr-Fe-Zn-Sn-Ca-Si-Ni

Deep cobalt blue F4343

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century. The fondant is already included in the mix. Appliance with brush or in serigraphy

Firing temperature: 950-1250°C

Formula: Co-Si-Al

Orange yellow D21/N

Colors to paint D Set. These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing Température : 950-1120°C

Formula: Sb-Al

Parma CSM120

Matt dark pink satin opaque enamel - CSM 119

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt light pink opaque enamel - CSM 118

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt cobalt blue opaque enamel - CSM 116

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.