TRANSPARENTS

Green CS446

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II

Orange CS437

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II

Red CS435 glaze

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II

Blue sky CS433

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing Temperature : 980°C

GROUPE II

 CUERDA SECA

Lilac CS423

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II

Cream CS417

This a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together excepted Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II

Yellow - CS 402

Series of special colors for the “Cuerda Seca” technique or cloisonné enamels.

All the colors are miscible with each other.

We also include the references F-4312 Black and F-4313, mixtures to trace the partition.

The CS-400 series is recommended for white paste.

The recommended firing temperature is 980°C.

Transparent glaze - C551

Composed of Frit.

Transparent for general use, both for red earthenware and for white tiles and majolica.

Develops very well the whole range of colors.

The firing temperature varies between 980-1050ºC.

Lead bisilicate enamel - BIS PB

Composed of Frit.

Transparent glaze with lead.

For glazing ceramic pottery and artistic pieces in white or red clay.

It can be used in monocuisson. Recommended firing temperature, between 950-1000ºC.

Satin transparent glaze - 5888

Without lead.

For enamelling ceramic pieces in red or white clay.La température de cuisson conseillée est de 980°C.

The recommended firing temperature is 980°C.

Burgundy wine transparent enamel - 5762/F

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Tomato red transparent enamel - 5650

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Cognac transparent enamel - 5600.

For enamelling parts in red or white clay.

For single-fired enamelling, add glue.

Recommended firing temperature between 980-1050ºC.

Passion blue transparent enamel - 5596

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Medium honey enamel for refractory clay FE-R - 5593

Semi-opaque light brown shiny enamel.

For enamelling ceramic pieces in red or white earth.

Firing temperature, between 980-1000ºC.

Green transparent enamel - 5565

Transparent, shiny copper green enamel.

Studied to mimic the appearance of copper green, avoiding the high taxes of lead solubility that characterizes them.

For glazing red or white earthenware.

The application can be carried out by bathing or spraying.

Admits perfectly mono-firing, being recommended the addition of an adhesive to increase adhesion.

Firing temperature between 980-1020°C.

Lavander blue transparent enamel - 5550

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Azure blue transparent enamel - 5549

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Blue Aubagne transparent enamel - 5528

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Transparent Sèvres blue enamel - 5517

For enamelling white majolica.

Recommended firing temperature between 1000-1050°C.

Yellow transparent enamel - 5500 / 8

Range of colored transparent enamels.

They can be applied on white or red engobed paste.

Firing temperature 980 - 1020°C.

Transparent glaze - 5460

Lead-free shiny transparent enamel widely used for enamelling white majolica, for its transparency, brilliance and good color development.

It can be used for culinary ceramics since it is lead free.

Can be decorated both under and on the enamel.

Specially indicated for obtaining colored enamels.

The firing temperature varies between 980-1040°C.

ENAMEL TRANSPARENT 542255 DUCK BLUE

Transparent honey enamel - 5301

Transparent honey enamel developed especially for traditional pottery and for items that must be food.

Traditional single and double firing.

Firing cycle> 5h.

For single firing, add glue.

The firing temperature varies between 980-1000ºC.

Cognac transparent enamel - 5282

Transparent and shiny cognac brown enamel.

For enamelling pieces in white or red clay.

Recommended firing temperature between 960-1020°C.

Transparente glaze Light green 5281

Coloured bright transparent glazes usable on red or white clay.
Temperature of firing 960-1040°C

GROUPE III With lead

Coefficient of expansion: 68

Transparent blue enamel -5206 VM

For enamelling ceramic pieces in white clay or engobed red clay.

Firing temperature between 980-1020°C.

Intense honey transparent enamel - 5052 C

For enamelling pottery ceramic in red or white clay.

Firing temperature between 980-1050ºC.

Cobalt Blue Transparent Enamel - 5008

Firing temperature between 960-1000°C.

Transparent glaze - 5005

Composed of Fritte.

Glossy transparent enamel is widely used for enamelling white majolica, for its excellent transparency, shine and color development.

It can be used for culinary ceramics because it does not give lead solubility under usual working conditions.

Can be decorated both under and on enamel.

It is specially indicated for obtaining coloured enamels.

The firing temperature varies between 980-1050ºC.

Alkaline base for crystallization - 3110 (FR 5)

Alkaline lead-free enamel with high temperature range.

Composed of frit.

Used in the production of crystallizations at high temperature.

Temperature range 1000-1300°C.