EMAILLAGE ET COULAGE

SEDIMENTATION TANK STAINLESS STEEL ON ROLLS

Ref : BAC

Settling tank on wheels capacity 100 liters

Entirely stainless steel construction
Tray placed under the sink in your shop to get the mud washes.

The sedimentation basin is delivered inclusive of siphon and inlet support from diameter 40 mm.
Dimensions: length 600mm Prof. 400mm Height 500mm.
Mounted on casters, galvanized steel construction and epoxy

Dimensions supply hose female:

Connecting inner diameter: 40 mm

 Male drain pipe dimensions:

Outside diameter of connection: 40 mm

Ask for an other sizes

SPRAY GUN FOR GLAZE IWATA GRAVITY 200 ML - AZ4 HTE AV

Aspiration of powder: clip Ref : 19040

Clip to be fixated at the border of the bucket : 19040

When you open a bag, when  you pour glaze or claw in powder, at the beginnig of the mixing, all this generate dust, which is not good for health and often irritating.

This is not healthy for the operator and generate pollution at workplace.

It is particurlarly to be avoiding for interior working.

The aspiration accessory is fixated at the border on the mixing bucket in the same than a hoover.

The spring clip can be attached to almost all mixing bucket.

Switch on your hoover when you are ready to pour the powder or mix and you will work almost without any dust.

Needle from 2,5 to 4,5 mm for PERFEKT4 spraygun

NEEDLE FOR ENAMELLING SPRAYGUN KRAUTZBERGER PERFEKT4

Needle from 1,0 to 2,2 mm for spraygun PERFEKT4

Reference : AIGPERF1A2.2

STAINLESS STEEL NEEDLE FOR MIGNON3 AND 4 ENAMELLING GUN FROM 0.2 TO 2 MM

Inox needle from 0,2 to 2,0 mm (call) for spraygun MIGNON3 and MIGNON4

Reference : AIGMIGNON

NEEDLE FOR ENAMELLING SPRAY GUN KRAUTZBERGER SMPL

Needle from 2,5 to 3.0 mm (call) for spraygun SM/PL

Reference : AIGKSMPL2.5A3

NEEDLE FOR ENAMELLING SPRAY GUN KRAUTZBERGER SMPL

Needle from 1,0 to 2,0 mm (call) for spraygun SM/PL

Reference : AIGKSMPL1A2

NEEDLE FOR IWATA ENAMELLING SPRAY GUN FROM 1.5 TO 2 MM

Reference : AIGIWATA1.5A2

NEEDLE FOR IWATA ENAMELLING SPRAY GUN FROM 0.8 TO 1.2 MM

Reference : AIGIWATA0.8A1.2

Needle form 3,0 à 4,5 mm (call) for spraygun HS25

Needle form 3,0 à 4,5 mm (call) for spraygun HS-25