Français
Deutsch
Italiano
Español
There are no more items in your cart
Ref :
DELAY20442
Brand:
N/A
Electric mixer Xo6M for casting and glaze, power 1600W - 20442
Power 1600W in 220 V
Electronic speed variator, + 2 mechanical speed
Rapid ( low couple), slow ( hard couple)
Rotation speed N°1: 150 to 450 tours/minute
Rotation speed N°2: 300 à 620 tours/minute
for product of density until 2.2 kg/l
Weight: 6.8 kg
Steel propeller : lenght 600 mm Ø turbine: 120 mm
Joint turbine M14
Product capacity from 20 to 40 kg or 90 liters maxi
Ref :
DELAY20406
Brand:
N/A
Small electric mixer for glaze and casting, power 1010W
Power 1010 W in 220 v
Electronic speed variator
Speed rotation from 360 to 680 tours/minutes for products of density until 1.8 kg/l
Weight: 4.5 kg
Steel propeller : lenght 600 mm Ø turbine 120 mm
Joint turbine M14
Product capacity: from 10 to 15 kg or maxi 30 liters
Ref :
COUDECPP
Brand:
N/A
90°C GALVANIZED STEEL ELBOW D 250 FOR CPP CABIN
Ref : COUDECPP
Steel bend at 90°C for spay booth CPP
Diameter 250 mm
Ref :
COUDECPGCPA
Brand:
N/A
90°C GALVANIZED STEEL ELBOW FOR CPG AND CPA SPRAY BOOTH CABIN
Ref : COUDECPGCPA
Steel bend at 90°C for spay booth CPG and CPA
Diameter 355 mm
Ref :
COMP24L
Brand:
N/A
COMPRESSOR WITH TANK 35 liters
Ref : COMP24L
Ref :
CLIPTUY
Brand:
N/A
CRIMPING CLIPS FOR COMPRESSED AIR HOSE Ø 12 MM - UNIT
Ref : CLIPTUY
Ref :
CHARCOULK3
Brand:
N/A
CASTING TROLLEY 200LITERS
Ref : CHARCOULK3
Price on request
Ref :
CHAPPERF2.5A4.5
Brand:
N/A
Air cap for nozzle 2,5 to 4,5 mm (call) for spraygun PERFEKT4
Ref :
CHAPPERF1A2.2
Brand:
N/A
Air cap for nozzle 1,0 to 2,2 mm for spraygun PERFEKT4
Ref :
CHAPKSMPL2.5A3
Brand:
N/A
AIR CAP FOR SMPL ENAMELLING GUN FOR 2.5 TO 3 MM NOZZLE
Ref : CHAPKSMPL2.5A3
Ref :
CHAPKSMPL1A2
Brand:
N/A
AIR CAP FOR SMPL ENAMELLING GUN FOR 1 TO 2 MM NOZZLE
Ref : CHAPKSMPL1A2
Last items in stock
Last items in stock
Ref :
CHAPHS252.5A4.5
Brand:
N/A
AIR CAP HS25 FOR 2.5 TO 4.5 MM NOZZLE
CHAPHS252.5A4.5
Aircap for nozzle 2,5 to 4,5 mm (call) for spraygun HS25
Ref :
CHAPHS251.5A2.2
Brand:
N/A
AIR CAP HS-25 FOR NOZZLE 1.5 TO 2.2 MM
Aircap for nozzle 1,8 to 2,2 mm (call) for spraygun HS25
Ref :
CABINERS5205
Brand:
N/A
Ref :
CABINECPP
Brand:
N/A
SPRAY BOOTH CPP DRY FILTER
Constructed of galvanized steel and coated with epoxy paint.
Cabin light to put on a table.
Ref :
CABINECPG
Brand:
N/A
SPRAY BOOTH CPG DRY FILTER
Constructed of galvanized steel and coated with epoxy paint.
Cabin mounted on feet.
Ref :
CABINECPA5PMINOX
Brand:
N/A
SPRAY BOOTH CPA5PMINOX STAINLESS STEEL
Wet back spray booth stainless steel model narrow (CPA-PM 700mm).
The water wash spray booth works on a curtain of continuously, recycled water running down the rear face of the spray booth.
A glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan.
The glaze in trapped by the water curtain, whist the air stream is pulled through the booth and into a stainless steel pre-filter and finally into a washable filter bag.
Ref :
CABINECPA5INOX
Brand:
N/A
SPRAY BOOTH CABIN CPA5 STAINLESS STEEL
SOLARGIL Wet Back Spray Booth CPA5
The CPA5 spraybooth has been designed to meet the ever increasing need to protect our environment.
The water Wash spraybooth works on the principle of a curtain of continuous recycling water running down the rear face of the spraybooth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable pre filter and finally then outside building.
Ref :
CABINECPA2RECY
Brand:
N/A
STAINLESS STEEL SPRAY BOOTH WITH 2 TANKS WITHOUT EXTERNAL EXTRACTION CPA2- RECYCLE
Staintess steel spray booth with 2 tanks without external extraction.
2 Waters tanks from 60 liters.