EMAIL LIQUIDE A EFFET PSE-232 JAUNE 250GR

YELLOW OPAC LIQUID GLAZE PSE232

Yellow PSE232

PSE range. Liquid glazes with gleams

Advice :

Temperature of firing : 980-990°C

Mentions :

GROUPE II

Presence of lead. Use only for decorative products

PSE LIQUID EFFECT GLAZES READY TO USE OPAQUE AND GLOSSY GROUP II

The PSE liquid series is available in 250g and 1kg pots.

These effect glazes can be used with a brush, a glaze gun, a dip and a ladle.

PSE opaque glazes can be used on all types of earthenware.

The colour will be the same as the original on a white biscuit or slightly darker on a red biscuit.

Firing temperature 980°C.


Group II :

Glazes whose composition contains lead, but which, when used under the conditions defined below, comply with Directive 84/500/EEC (RD.1043/1990).

However, in order to achieve compliance, samples of the pieces made must be subjected to an analysis of the solubility of lead which must be carried out by an accredited laboratory.


Conditions of use of group II glazes:

Firing at the recommended temperature

Slow firing cycle

End of firing stage