Français
Forged steel modelling tool stainless steel for clay L. 17.8 cm
Ref : PTMP020
CERAMIC SCULPTURE TOOL IN STAINLESS STEEL
Porcelain from Valencia for casting - PSA
Price shown per kilo
Extruding barel for EX-115 model.
6 Models.
Square tube EXT 37 mm INT 25 mm - EXT 63 mm INT 50 mm.
Octogon tube EXT 32 mm INT 22 mm - EXT 53 mm INT 44 mm.
Round tube EXT 37 mm INT 25 mm - EXT 62 mm INT 50 mm.
Transparent glaze - PR O
Composed of Frit.
Transparent varnished which has been specially studied for pieces of pottery which must contain food.
It adapts correctly both to popular earthenware (red clay) in double firing, as in single firing, because in its formulation, products are included which favor its adhesion to the soil.
It admits the addition of coloring oxides and in particular the natural ones (Cu, Co, Mn, Fe, ....).
It perfectly develops both underglaze colors and our range of colored engobes.
The firing temperature varies between 930-980ºC. At temperatures above 970ºC, kaolin or clay should be added.
TAKING PRE-WIRED FOR ATR902
Socket with cable
Taking pre-wired for ATR900 (with 6 numbered son 1.5m long) or for ATR902 (with 7 numbered son 1.5m long)
We can provide you taking pre-wired for ATR900 or ATR902
Alternative socket 8 pôles for ATR900 (fixation on the kiln SBM-S)
Racking for controller ATR902 (or old ATR-900 and ATR-901)
PRESS RAM 23 T
23 ton press
Reference : PRESSRAM23T - RS6985
Gland special Glaz for spraygun SM/Pl and HS-25
6000 Additive mix
To make easier your mixing for the realisation of whitewash and stucco, Solargil propose you the PREDOSE, composed of different additive, which will ease you the preparation.
Pink coloured porcelain - PRE
Smooth porcelain.
For throwing, modeling and jewelry.
12 colour.
Transparent lead-free powder enamel - PR99
Composed of Fritte.
For enamelling of white earthenware.
We can decorate under and on enamel.
Obtaining coloured enamels by adding dyes from the "P" series.
Firing temperature between 1000 and 1100ºC.
Bright white zircon enamel - PR 6303 F
Composed of Frit.
Bright opaque white enamel, lead free. Recommended for parts for food use.
For the enameling of ceramic pieces in red or white earth, especially those which must contain food.
Can be colored with natural oxides or calcined type P series. If the room must contain food, use lead-free dyes. The application can be done with a bath, brush, spray gun or screen printing.
Firing temperature between 1000-1020ºC where the enamel shows its best development.
