EMAILLAGE ET COULAGE

FAN FOR CPP ENAMELLING BOOTH

Ref : VENTILCPP

Extration fan diameter 380 mm for spray booth

Volt 220 V
Power 180 W
Speed 2700 RPM
Diameter 320 mm
Flow 2610 m3/h
73 dBA

Hose Gun enameling with braided reinforcement.

Dimensions :Ø int. 8 mm - Ø ext. 12 mm

Ref : TUYPISTEMAI

TUYAU CAPILLAIRE 6MM 100 METRES POUR MOULE PLATRE

Réf : TUYCAP

Inox pipe of 2 meter and diameter 250 mm for spay booth CPP

2 M GALVANISED STEEL TUBE D355 MM FOR CPG AND CPA ENAMELLING BOOTH

Ref : TUBECPGCPA

Inox pipe of 1 meter for spay booth CPG and CPA

Ceramic De-Glazing belt Ref: TAPDES11

Ref : TAPIS40/1275/10

Sponge rubber belt - dimension L 40 x l 1275 x E 10 mm

DEGLAZING BELT SPONGE 380* 3410* Ep 15 mm

Ceramic De-Glazing belt Ref: TAPIS380/3410/15

Sponge rubber belt - dimensions L 380 x l 3410 x E 15 mm

TAPIS DE DESEMAILLEUSE 380*1100* Ep 10 mm

Réf : TAPIS380/1100/10

DEGLAZING BELT 360* 974* Ep 15 mm

SPONGE FOR GLAZE REMOVAL MACHINE

Ceramic deglazing

Sponge rubbert belt for foot wiper - dimensions L 360 x l974 x 15 mm

DEGLAZING BELT SPONGE 360* 974* Ep 10 mm

Ceramic deglazing belt

SPONGE FOR GLAZE REMOVAL MACHINE

Sponge rubber belt - dimensions L 360 x 974 x 10 mm

Ref : TAPIS360/974/10

DEGLAZING BELT 350* 950* Ep 10 mm

Ceramic De-Glazing belt Ref: TAPIS350/950/10

Sponge rubber belt for foot wiper- dimensions L 350 x l 950 x E 10 mm

DEGLAZING BELT 350* 930* Ep 10 mm

Ceramic deglazing belt Ref :TAPIS350/930/10

Sponge rubber belt - dimensions  L 350 x l 930 x E 10 mm

DEGLAZING BELT  350* 1010* Ep 15 mm

Ceramic DeGlazing belt for foot wiper Ref: TAPIS350/1010/15

Sponge rubbert belt - dimensions L 350 x l 1010 x E 15 mm

DEGLAZING BELT 340* 950* Ep 10 mm

SPONGE FOR GLAZE REMOVAL MACHINE

Ceramic de-glazing belt Ref: TAPIS340/950/10

Sponge rubbert belt - dimension L340xl950xE10mm

BELT DEGLAZING 300* 950* Ep 15 mm

Ceramic DeGlazing belt for foot wiper machine

Sponge rubber belt - dimensions L 300 x l 950 x E 15 mm

Ref : TAPIS300/950/15

BELT DEGLAZING 300* 950* Ep 10 mm

Ceramic De-Glazing belt for foot wiper

Sponge rubber belt - dimensions  L 300 x l950 x E 10mm

De-glazing belt

For glaze-removal-machine

Sponge rubbert belt for foot wiper - dimension L 300 x 930 x 15mm

Ref : TAPIS300/930/15

BELT FOR DEGLAZING MACHINE 300* 930* Ep 10 mm

Ceramic de-glazing belt Ref : TAPIS300/930/10

Cloth for slab rollers- dimension  L300xl950xE10mm

SPONGE RUBBERT BELT 120* 1275* Ep 10 MM FOR DE-GLAZING

Ceramic De-Glazing belt Ref: TAPIS120/1275/10

Sponge rubbert belt - dimension L 120 x l 1275 x E 10 mm

VIBRATORY SIFTER IN STAINLESS STEEL ON FOOT Ø 450 MM

Vibratory Sifter REF : TAMISEURPIED

Siever rounded of 450 mm on feet in inox - BISV 450/1 CR

ROUND SIFTER TO BE MOUNTED ON THE EDGE OF A BIN Ø 450 MM

Ref : TAMISEUR450

ROUND SIFTER TO BE MOUNTED ON THE EDGE OF A BIN Ø 240 MM

Ref : TAMISEUR240

Rounded siever to put slightly of the tank-BISV 240 BM

VIBRATORY SIFTER TO PUT SLIGHTY OF THE TANK Ø 200 MM

Rounded siever to put slightly of the tank

Ref : TAMISEUR200

SIEVE FOR MOBILE MIXER 55 LITERS

Stainless  steel wieve

Adaptable to the moving mixer  55 liters

Ref : TAMIS71064

Support for mixer serie Xo-45624

Support for mixer, construction in galvanized steel with foldable feet.

Guiding column

Tare weight: 17 kg

Unfolding dimensions : 455 x 4500 x H 1180 mm

Maximun high for the bucket: 450 mm

CONICAL RUBBER VALVE FOR CASTING TAP

Valve Cone for Casting Tap

Ref : SOUPAPE

Gland special Glaz for spraygun SM/Pl and HS-25

WATER PUMP FOR SPRAY BOOTH CPA - 517

Pump for spray booth CPA

220 V monofasic

3 Speeds

STAINLESS STEEL PUMP FOR GLAZE AND CASTING 2.2 KW - BVG 2.2

Ref : POMPEBVG2.2

VERTICAL PUMP STAINLESS STEEL 0.75 KW - BVG 0.75

Inox pump 60 liters/min for glaze and casting slip to 5 meters max (100 kg/mn)

VERTICALS PUMP STAINLESS STEEL 0.37 KW - BVG 0.37

Verticals inox pump capacity 0,37 KW 400 V - BVG-0.37

HAND CASTING TAP

Slip gun D 38 mm for casting slip

HAND CASTING TAP 25 MM -SG-LS2

Slip gun D 25 mm

"PERFEKT4" spray gun aspiration version

For ceramic glaze

"PERFEKT- 4" spray gun gravity version

"PERFEKT- 4" spray gun aspiration version

For ceramic glaze

ENAMELLING GUN MIGNON4 GRAVITE 125 ML

Ref : MIGNON4

Spraygun delivered with nozzle and needle in 1.2 mm

KSMPL GRAVITE GLAZE GUN 500 ML

Ref : KSMPL

The SMPL gun is the PERFEKT4 gun without air flow adjustment.

This makes it possible to propose a top-of-the-range enamelling gun at an attractive price.
Ideal model for small and medium productions.
Separate adjustment of flat/round jet and material flow.

Body entirely made of polished aluminum. Stainless steel interior parts, brass head.

Special enamel gland.
Nozzles: diameters available on request 1 - 1,4 - 1,6 - 1,8 - 2,2 - 2,8mm
Gravity version with 500ml cup

The SM/PL gun is originally available in 1.8mm

You can receive the gun with the nozzle diameter of your choice by simply specifying it when ordering.

KIT EASYCAST SLIP MACHINE STAINLESS STEEL PUMP KIT 0.75HP WITH HIGH FLOW CASTING GUN

Casting Pump with Nozzle

Ref : KITPOMPPIST75

KIT EASYCAST SLIP MACHINE

Complet kit casting slip unit

Casting Pump with Nozzle

Ref : KITPOMPPIST

Set of complete joint

COMPLETE GASKET KIT FOR HS25 GUN

Ref : KITJOINTHS25

Complet glaze kit with Compressor + Spraygun + Air hose 5 meters + connection

Spraygun in 1.8 mm

IWATA AZ40 ENAMELLING SPRAYGUN NEEDLE GASKET.

Ref : JOIAIGIWATA

COMPLETE GASKET SET FOR IWATA AZ40 GRAVITY ENAMEL SPRAYGUN

Ref : JEUJOINTSIWATA

COMPLETE GASKET SET FOR SMPL ENAMELLING SPRAYGUN

Set of complete joint

COMPLETE GASKET SET FOR PERFEKT4 ENAMELLING SPRAYGUN

Set of complete joint

KRAUTZBERGER HS30 GRAVITE ENAMELLING GUN 500 ML

Spraygun for intensive or industrial enamelling.

Ref : HS30G500

STAINLESS STEEL PROPELLER FOR GLAZE AND BARBOTINE MIXER Xo6M

Ref : HEL41769

Stainless steel propeller for mixer Xo1M - 41278

Cup gravity 300 ml for Mignon4

Cup gravity 125 ml plastic for Mignon 4

Nylon gravity pot for spraygun PERFEKT4

Ref : GODHS25GRAV750

Aluminium sucking up pot for spraygun HS-25

Ref : GODHS25ASP750

Aluminium sucking cup pot for spraygun HS25

Ref : GODHS25ASP1000

Nylon gravity pot for spraygun PERFEKT4

Ref : GODGRAPERF

Aluminium sucking up pot for spraygun PERFEKT4

Aluminium sucking up pot for spraygun PERFEKT4

Ref : GODASPPERF1000

Locking clip for bucklet 65 and 90 liters Ref : 19180

Depanding which materials are using in, the mixing bucklet can spill.

Which is dangerous and also annoying.

Materials can spill and afterwards your workplace will be dirty.

The locking clip helps you because it keeps the bucklet straight and in right position.

Thanks to the holding wedge , you can fix quickly and easily bucklets of 65 and 90 liters.

Washable spare filter VNF Universel

Sold by linear meter.

1 X 1 m

Spray Booth Filters

REPLACEMENT FILTER FOR CPP SPRAY BOOTH

Ref : FILTRECPP

REPLACEMENT FILTER FOR CPG SPRAYBBOTH CABIN

Ref : FILTRECPG

REPLACEMENT AIR FILTER FOR CPA ENAMELING BOOTH

Ref : FILTRECPA

GUN NOZZLE FOR HOSE CONNECTION - EMBHS25

Gun nozzle for hose connection

for HS25 gun

Ref : EMBHS25

GLAZE BUFFING MACHINE ECONOMIC

Foot wiper

Ref : DESEMECO

HALF MASK WITH 2 FILTER WAFERS

Silicone half-mask with 2 filter wafers FFP3

Ref : DEMIMASQUE

MOBILE DELAYER FOR GLAZE AND BARBOTINE 55 L - DELAYRS5498

ENAMEL AND SLIP MIXER 200 KG

Ref : DELAYR6037

Electric mixer Xo6M for casting and glaze, power 1600W - 20442

Power 1600W in 220 V

Electronic speed variator, + 2 mechanical speed

Rapid ( low couple),  slow ( hard couple)

Rotation speed N°1: 150 to 450 tours/minute

Rotation speed N°2: 300 à 620 tours/minute

for product of density until 2.2 kg/l

Weight: 6.8 kg

Steel propeller : lenght 600 mm Ø turbine: 120 mm

Joint turbine M14

Product capacity from 20 to 40 kg or 90 liters maxi

Small electric mixer for glaze and casting, power 1010W

Power 1010 W in 220 v

Electronic speed variator

Speed rotation from 360 to 680 tours/minutes for products of density until 1.8 kg/l

Weight: 4.5 kg

Steel propeller : lenght 600 mm Ø turbine 120 mm

Joint turbine M14

Product capacity: from 10 to 15 kg or maxi 30 liters

90°C GALVANIZED STEEL ELBOW D 250 FOR CPP CABIN

Ref : COUDECPP

Steel bend at 90°C for spay booth CPP

Diameter 250 mm

90°C GALVANIZED STEEL ELBOW FOR CPG AND CPA SPRAY BOOTH CABIN

Ref : COUDECPGCPA

Steel bend at 90°C for spay booth CPG and CPA

Diameter 355 mm

COMPRESSOR WITH TANK 35 liters


Ref : COMP24L

CRIMPING CLIPS FOR COMPRESSED AIR HOSE Ø 12 MM - UNIT

Ref : CLIPTUY

CASTING TROLLEY 200LITERS

Ref : CHARCOULK3

Price on request

Air cap for nozzle 2,5 to 4,5 mm (call) for spraygun PERFEKT4

Air cap for nozzle 1,0 to 2,2 mm for spraygun PERFEKT4

Aircap jet plat for spraygun MIGNON-3

AIR CAP FOR SMPL ENAMELLING GUN FOR 2.5 TO 3 MM NOZZLE

Ref : CHAPKSMPL2.5A3

AIR CAP FOR SMPL ENAMELLING GUN FOR 1 TO 2 MM NOZZLE

Ref : CHAPKSMPL1A2

AIR CAP HS25 FOR 2.5 TO 4.5 MM NOZZLE

CHAPHS252.5A4.5

Aircap for nozzle 2,5 to 4,5 mm (call) for spraygun HS25

AIR CAP HS-25 FOR NOZZLE 1.5 TO 2.2 MM

Aircap for nozzle 1,8 to 2,2 mm (call) for spraygun HS25

Wet Back Spray Booth

Video

Water Spraybooth RS5205

SPRAY BOOTH CPP DRY FILTER

Constructed of galvanized steel and coated with epoxy paint.

Cabin light to put on a table.

SPRAY BOOTH CPG DRY FILTER

Constructed of galvanized steel and coated with epoxy paint.

Cabin mounted on feet.

SPRAY BOOTH CPA5PMINOX STAINLESS STEEL

Wet back spray booth stainless steel model narrow (CPA-PM 700mm).

The water wash spray booth works on a curtain of continuously, recycled water running down the rear face of the spray booth.

A glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan.

The glaze in trapped by the water curtain, whist the air stream is pulled through the booth and into a stainless steel pre-filter and finally into a washable filter bag.

SPRAY BOOTH CABIN CPA5 STAINLESS STEEL

SOLARGIL Wet Back Spray Booth CPA5

The CPA5 spraybooth has been designed to meet the ever increasing need to protect our environment.
The water Wash spraybooth works on the principle of a curtain of continuous recycling water running down the rear face of the spraybooth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable pre filter and finally then outside building.

STAINLESS STEEL SPRAY BOOTH WITH 2 TANKS WITHOUT EXTERNAL EXTRACTION CPA2- RECYCLE

Staintess steel spray booth with 2 tanks without external extraction.

2 Waters tanks from 60 liters.

SPRAY BOOTH CABIN CPA2 STAINLESS STEEL WITH 2 BASINS

Wet back spray booth stainless steel with 2 basins (100 liters).

SPRAY BOOTH STAINLESS STEEL CPA1000 BIG MODEL

Wet back spray booth stainless steel CPA -1000 for ceramic use

The water wash spray booth works on a curtain of continuously, recycled water running down the rear face of the spray booth.

A glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan.

The glaze in trapped by the water curtain, whist the air stream is pulled through the booth and into a stainless steel pre-filter and finally into a washable filter bag.

NOZZLE FOR PERFEKT4 ENAMELLING GUN WITH FLAT JET FROM 2.5 TO 4.5 MM AT CHOICE

Nozzle from 2,5 to 4,5 mm (call) for spraygun PERFEKT4

NOZZLE FOR PERFEKT4 GLAZING GUN FOR FLAT JET FROM 1 TO 2.5 MM

Nozzle from 1,0 to 2,2 mm (call) for spraygun PERFEKT4

NOZZLE FOR MIGNON3 ENAMELLING SPRAYGUN FROM 0.2 TO 2 MM

Nozzle form 1.0 to 2,0 mm (call) for spraygun SMPL.

SPRAY GUN NOZZLE SMPL FOR FLAT JET FROM 2.5 TO 3 MM AT CHOICE

Nozzle from 2,5 to 3.0 mm (call) for spraygun SMPL

NOZZLE FOR SMPL ENAMELLING SPRAYGUN FOR FLAT JET 1 TO 2 MM AT CHOICE

Nozzle form 1.0 to 2,0 mm (call) for spraygun SMPL.

NOZZLE HS25 FOR FLAT JET OF 3 TO 4.5 MM AT CHOICE

Ref : BUSEHS253A4.5

NOZZLE FLAT JET FROM SPRAY GUN HS251.5 TO 2.5 MM AS DESIRED

Ref : BUSEHS251.5A2.5

Nozzle from 1,5 à 2,5 mm (call) for spraygun HS 25

BENCH FOR CASTING 700 X 1400 X H 850 MM

Slip Casting Draining Table

SEDIMENTATION BASIN  STAINLESS STEEL 60 LITERS-BACSLIM

Ref : BACSLIM

The BACSLIM Sedimentation Basin 60 liters is the ideal support for environmental awareness in the ceramic workshop.
Glazes, clays and engobes are effectively collected and removed from the wastewater before they reach the sewage system.

castors.

DECANTER IN STAINLESS STEEL 100 LITERS WITH 2 REMOVABLES FILTER

Decanter with stainless steel grease collection and polluting central kitchen, paint shop, archaeology, sediment, ceramic school, etc...

Plastic bucket for glaze or babotine 90 liters Ref : BAC90L

Plastic bucket for glaze or babotine 65 liters Ref : BAC65L

Tank for enamel /  glaze 400 litres

With rolls

CLAY AND GLAZE BIN 140 LITERS WITH LID

SEDIMENTATION TANK STAINLESS STEEL ON ROLLS

Ref : BAC

Settling tank on wheels capacity 100 liters

Entirely stainless steel construction
Tray placed under the sink in your shop to get the mud washes.

The sedimentation basin is delivered inclusive of siphon and inlet support from diameter 40 mm.
Dimensions: length 600mm Prof. 400mm Height 500mm.
Mounted on casters, galvanized steel construction and epoxy

Dimensions supply hose female:

Connecting inner diameter: 40 mm

 Male drain pipe dimensions:

Outside diameter of connection: 40 mm

Ask for an other sizes

SPRAY GUN FOR GLAZE IWATA GRAVITY 200 ML - AZ4 HTE AV

Aspiration of powder: clip Ref : 19040

Clip to be fixated at the border of the bucket : 19040

When you open a bag, when  you pour glaze or claw in powder, at the beginnig of the mixing, all this generate dust, which is not good for health and often irritating.

This is not healthy for the operator and generate pollution at workplace.

It is particurlarly to be avoiding for interior working.

The aspiration accessory is fixated at the border on the mixing bucket in the same than a hoover.

The spring clip can be attached to almost all mixing bucket.

Switch on your hoover when you are ready to pour the powder or mix and you will work almost without any dust.

Needle from 2,5 to 4,5 mm for PERFEKT4 spraygun

NEEDLE FOR ENAMELLING SPRAYGUN KRAUTZBERGER PERFEKT4

Needle from 1,0 to 2,2 mm for spraygun PERFEKT4

Reference : AIGPERF1A2.2

STAINLESS STEEL NEEDLE FOR MIGNON3 AND 4 ENAMELLING GUN FROM 0.2 TO 2 MM

Inox needle from 0,2 to 2,0 mm (call) for spraygun MIGNON3 and MIGNON4

Reference : AIGMIGNON

NEEDLE FOR ENAMELLING SPRAY GUN KRAUTZBERGER SMPL

Needle from 2,5 to 3.0 mm (call) for spraygun SM/PL

Reference : AIGKSMPL2.5A3

NEEDLE FOR ENAMELLING SPRAY GUN KRAUTZBERGER SMPL

Needle from 1,0 to 2,0 mm (call) for spraygun SM/PL

Reference : AIGKSMPL1A2

NEEDLE FOR IWATA ENAMELLING SPRAY GUN FROM 1.5 TO 2 MM

Reference : AIGIWATA1.5A2

NEEDLE FOR IWATA ENAMELLING SPRAY GUN FROM 0.8 TO 1.2 MM

Reference : AIGIWATA0.8A1.2

Needle form 3,0 à 4,5 mm (call) for spraygun HS25

Needle form 3,0 à 4,5 mm (call) for spraygun HS-25