Français
Deutsch
Italiano
Español
GLAZE GE308 BLEU TURQUOISE BLUE TRANSPARENT. BIG THICKNESS. WITH LEAD
Turquoise blue
Ref : GE308
Transparent glazes "big thickness" with lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
Transparent glaze grey -GE306
Transparent glazes "big thickness" with lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperat
KEVLAR® SOFT GLOVES DOUBLE WOOL
Kevlar® soft gloves double wool
Ref : GANTKDL
Insulating brick for cutlery forge
Refractory brick
Ref : FTCOUT1
DOUBLE INOX TOOL 160 MM - FR453
2 Tips, 1 arrow-shaped at the 2 sharp edge and 1 spoon-shaped at the cutting edge.
Ideal for sculpture and detail work.
SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.
The fondant is already included in the mix.
Appliance with brush or in serigraphy
Firing température 950-1200°C
Formula: Cu-Zr-Si-Pr
Soft stainless steel palette drop water 69 x 36 mm - EST311S
Hard stainless steel palette half-moon 152 x 40 mm - EST306R
Soft stainless steel palette half-oval 90 x 45 mm - EST302S
Intense blue sky - ES8057
Temperature of firing : 950-1050°C
Groupe I
Without lead
Shiny white - ES798
Temperature of firing : 950-1050°C
Coeff dilat 25-300°C: 62
Groupe II
With lead
Matt white - ES600
Temperature of firing : 950-1050°C
Coeff Dilat 25-300°C: 72
Groupe I
Without lead
Orange - ES274
Temperature of firing : 950-1050°C
Groupe III
With lead
Red cadmium - ES253
Temperature of firing : 950-1050°C
Groupe III
With lead
COLORED ENGOBE TURQUOISE BLUE EN46
LIQUID RED ENGOBE UNLEADED EGM57/003
Liquid red engobe ready for use EGM57/003
TURQUOISE BLUE LIQUID ENGOBE UNLEADED EGM53/004
Liquid blue engobe ready for use EGM53/004
Firing temperature : 980-990°C°C
Without lead
LIQUID ENAMEL WITH EESP49 EFFECT ORANGE
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP47 EFFECT GREEN
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL EESP46 EFFECT BLACK
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP44LL EFFECT WITH GOLDEN HIGHLIGHTS 1KG
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP30 BEIGE EFFECT
The EESP series is liquid, in jars.
Temperature : 980-1080°C
Speckled blue EESP26LL in 1kg
Liquid glaze without lead
GROUPE I
Firing temperature: 980°C
Lead free cinnamon brown cadmium enamel - EECS 07
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free cardinal red cadmium enamel - EECS 03
Cadmium selenium effect, bright red.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Brown stoneware & porcelain engobe - EASP07
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
LIQUID SLIP STONEWARE & PORCELAIN EASP04LL MAKE-UP 1KG
Stoneware & porcelain make-up slip - EASP04LL
Liquid slip in 1 kg jar
Collection suitable for single-firing (with the addition of 5% Monocol V for the powder engobe) and double-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder form.
At earthenware temperature, colors will be more pastel than presented.
Advice :
Firing range 980 - 1280°C
Application by brush, dip or spray.
SLIP GRES & PORCELAIN EASP04 MAKE-UP
'Make-up' stoneware & porcelain engobe - EASP04
POWDER
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
