Best sellers

DIAMOND ABRASIVE PAD EXTRA FINE GRIT (P 400) YELLOW

Ref : TAMPONAB400

Semi-rigid abrasive pad with diamond coating

To sand enamel or clay splinter on your pieces.

Extra fine grain (P 400) Yellow

Stainless steel plastic sieve Ø 16 / 120 µ - TAMISVERT

WOODEN SIEVE D  30 CM

Professional Series Superior Quality Wooden Sieve

Wood sieve double strapping Ø 300 x H 110 mm 

Ref : TAMIS30

TAMIS BOIS DOUBLE CERCLAGE D:16 CM 80 µ

Aluminium sieve Ø 110 mm mesh 120 µm - TAMIALU120

Aluminium sieve Ø 110 mm mesh 100 µm - TAMIALU100

Multiple support for pearl with 6 bars 1200°C H 80 mm lenght 100 mm widht 80 mm 47020200

Bead Firing Rack

Brass wick holder for oil lamp - SUPMEC

Composed of 2 brass parts /

The first to stick on the ceramic neck (Ø 12 mm) of the lampe.

The second that holds the fuse, screws into the first.

Comes with 1 wick of about 30 cm.

Cobalt sulfate

Ref : SULFCOB

MAT BLACK LIQUID GLAZE UNLEADED SOL10/120 300GR

Opaque black liquid glaze SOL10/120

Without lead GI

Firing temperature : 980-990°C

300gr

YELLOW SUN LIQUID GLAZE UNLEADED SOL06/101 250GR

Sun Yellow liquid glaze SOL06/101

Without lead GI

Firing temperature : 980-990°C

250gr

Aquamarine liquid glaze SOL05/109

Without lead

Firing temperature : 980-990°C

Chrome green liquid glaze SOL05/101

Without lead

Firing temperature : 980-990°C

Electric blue liquid glaze SOL03/107

Without lead

Firing temperature : 980-990°C

Blue celestial liquid glaze SOL03/105

Without lead

Firing temperature : 980-990°C

White mat liquid glaze SOL02/024

Without lead

Firing temperature : 980-990°C

TRANSPARENT MATE LIQUID GLAZE WITHOUTLEAD SOL01/009L

Transparent mate liquid glaze SOL01/009L

Transparent crackled glaze SOL01/004

Without lead

Firing temperature : 1000-1300°C

Coefficient of dilatation: 101

Ivory white enamel - SIGLO XV

Opaque glossy white enamel.

This is an enamel studied to imitate antique white enamels which have a slightly yellowish (dirty white) tone.

We recommend using the special color series for decorating SIGLO XIII-type pieces.

Can be used indifferently on white and red paste.

The recommended firing temperature varies between 950-1000°C.

Crystallized brown S3A

Lustres glazer with lead

Temperature for firing : 850-990°C

Presence of lead. Use only for decorative products

Wooden roller to spread the earth - RP-S

Length 25 cm

Axle on a bearing ø 50 mm

6510 Scarlet red D

Electronic Potter wheel on feet  PW-DCT LEG

Power 250 W en 220 V (1/3 CV)

Dimensions : L 530 x P 680 x H 510 mm .

Wheel head diameter 300 mm .

Collector in plastic in 2 parts which can be easily dismantled.

Silencious potter's wheel.

direction: Clockwise or Anti-clockwise.

Variable speed to 0 at 300 RPM.

Quiet: 55 dB.

Weight 35 kg .

Capacity : 15 kg max

Forged stainless steel modeling double-end tool for clay L. 17.8 cm - PTS2411

Transparent glaze - PR O

Composed of Frit.

Transparent varnished which has been specially studied for pieces of pottery which must contain food.

It adapts correctly both to popular earthenware (red clay) in double firing, as in single firing, because in its formulation, products are included which favor its adhesion to the soil.

It admits the addition of coloring oxides and in particular the natural ones (Cu, Co, Mn, Fe, ....).

It perfectly develops both underglaze colors and our range of colored engobes.

The firing temperature varies between 930-980ºC. At temperatures above 970ºC, kaolin or clay should be added.

Bright white zircon enamel - PR 6303 F

Composed of Frit.

Bright opaque white enamel, lead free. Recommended for parts for food use.

For the enameling of ceramic pieces in red or white earth, especially those which must contain food.

Can be colored with natural oxides or calcined type P series. If the room must contain food, use lead-free dyes. The application can be done with a bath, brush, spray gun or screen printing.

Firing temperature between 1000-1020ºC where the enamel shows its best development.

Bright white zircon enamel - PR23

Composed of Frit.

It is an enamel specially designed for pottery and tiling.

Admits decoration well.

The firing temperature varies between 950-1000ºC.

KILN PLUTON 3S 76 L 1320° TOPLOADER

Stainless carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramic fiber

Kiln refractory plates 1340 ° C max 600x600x15 mm

Plate 600x600x15mm Weight 11.9 kg
Fragile material, can not be shipped by Post

Kiln shelves temperature 1340 ° C max 400x400x13mm

Plate 400x400x13mm Weight 4.3 kg
Fragile material, can not be sent by post.

SHELVE REFRACTORY FOR RAKU KILN ROUND DIAM 396X15 MM 1260°C

Kiln shelves temperature 1340 ° C max 300x300x13mm

Plate 300x300x13mm

Weight 2.3 kg
Fragile material, can not be sent by post.

Kiln refractory round plates 1340 ° C max Ø 560 x 17 mm (8kg)

Ref : PLAQ500
Fragile material, can not be sent by post.

Hole brass cutter Ø 20 mm L. 160 mm - PERF80

BEIGE PATINA PIGMENT

6223 Beige Patina

Ref : PABE

Pigment of mineral origin.

They are earth or rock very finely ground (ochres, earths, natural oxides).

 Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.

BLUE PIGMENT P82

Blue P82

P set colouring oxides lik Pur.

PINK OCHRE PIGMENT P62

Pink ochre P62

P set colouring oxides lik Pur.

ORANGE PIGMENT P532

orange P532

P set colouring oxides lik Pur.

RED BROWN PIGMENT P50

Red brown P50

P set colouring oxides lik Pur.

NUT BROWN PIGMENT P37

Ceramic pigment Nut brown P37

P set colouring oxides lik Pur.

YELLOW PIGMENT P330

Ceramic pigment Yellow dark P300

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

BROWN PIGMENT P18

Brown P18

Ceramic pigment

P set colouring oxides lik Pur.

COLOURING OXIDE P127 LILAC PURPLE

lilac purple P127 / N

GREY PIGMENT  P108

Grey P108

set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

GREY PIGMENT P01 /S

Deep grey - P01

Gold to appliance with brush

Ref : OR12

Groupe I

Firing temperature: 650-750°C

Gold to appliance with brush

Ref : OR10

Groupe I

Firing temperature: 650-750°C

PIGMENT OXYDE DE COBALT BLEU 6410D

6410 Cobalt D blue

Pigment obtained by a succession of chemical reaction. 

In powder at a dry state

Black- N3320M/7 dur

GROUPE III

Firing temperature: 980-990°C

Pink natural Modelling clay firing Dark Pink

For initiation in clay. Adapted for modelling, stamping and throwing.

It dries in 3-4 days around with room temperature conditions.

CAUTION : realisations may crumble if you do not fire.

Firing temperature : 950-1050°C

It can not be glazed.

MONOCOLLE III VINYL RESIN LIQUID GLUE

Ref : MONOIII

Liquid vinyl resin

SHORT GUTTING TOOL 120 MM N°2

Simple ribbon tool stainless steel L. 120 mm N°2 -MIR74

DOUBLE CUTTING TOOLS L 170 MM N°7

Double ribbon  tools L. 170 mm N°7 - MIR44

Wick for oil lamp - MECH

Sold by the meter.

White smooth modeling clay - MBLANC5

Foldable disposable 3M mask class P3 (ffp3) - MASQUEU

Ultra light, very enveloping.

With exhalation valve filtering against dust and fibrogenic particles.

DISPOSABLE FOLDABLE MASK UNIT CLASS P3

The little illustrated guide to ceramics _ LCAHIERS

engobes

Les cahiers de Terres et couleurs

Marie-Pierre Lamy

40 pages

French

KIT DIGITAL THERMOMETER PROBE TYPE S 1400°C + 3 M CABLE

Ref : KITTHERS

Complet kit including, thermometer, probe type S (1400 ° C) 250mm + 3 meters compensating cable.

This kit comes fully assembled.

Complet glaze kit with Compressor + Spraygun + Air hose 5 meters + connection

Spraygun in 1.8 mm

6230 Havana Yellow

Pigment of mineral origin.

These are very finely ground earths or rocks (ochres, earths, natural oxides).

Highly resistant to light (unalterable to ultraviolet rays), they are non-toxic, have a very high covering power and are miscible with each other.

OIL FOR SCREW VACUUM PUMP / THE LITER

OIL for screw vacuum pump (grey pump) : the liter

Connection claw for heating element of 30 A max

CONNECTION CLAMP FOR RESISTOR WIRE OF 16A MAX

Ref : GRIFFE16

BROWN TRANSPARENT GLAZE BIG THICKNESS UNLEADED :  GE405

Brown

Ref : GE405

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

YELLOW TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE401

Yellow 

Ref : GE401

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

TRANSPARENT GLAZE BIG THICKNESS UNLEAD : GE400

Transparent

Ref : GE400

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE310 GREEN GRASS TRANSPARENT. BIG THICHNESS. WITH LEAD

Green grass

Ref : GE310

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE308 BLEU TURQUOISE BLUE TRANSPARENT. BIG THICKNESS. WITH LEAD

Turquoise blue

Ref : GE308

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Transparent glaze grey -GE306

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperat

KEVLAR® SOFT GLOVES DOUBLE WOOL

Kevlar® soft gloves double wool

Ref : GANTKDL

Insulating brick for cutlery forge

Refractory brick

Ref : FTCOUT1

DOUBLE INOX TOOL 160 MM - FR453

2 Tips, 1 arrow-shaped at the 2 sharp edge and 1 spoon-shaped at the cutting edge.

Ideal for sculpture and detail work.

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Firing température 950-1200°C

Formula: Cu-Zr-Si-Pr

Soft stainless steel palette drop water 69 x 36 mm - EST311S

Hard stainless steel palette half-moon 152 x 40 mm - EST306R

Soft stainless steel palette half-oval 90 x 45 mm - EST302S

Shiny white - ES798

Temperature of firing : 950-1050°C

Coeff dilat 25-300°C: 62

Groupe II

With lead

Matt white - ES600

Temperature of firing : 950-1050°C

Coeff Dilat 25-300°C: 72

Groupe I

Without lead

Clear green- ES263

Temperature of firing : 950-1050°C

Groupe III

With lead

Red cadmium - ES253

Temperature of firing : 950-1050°C

Groupe III

With lead

COLORED ENGOBE TURQUOISE BLUE   EN46

LIQUID RED ENGOBE UNLEADED EGM57/003

Liquid red engobe ready for use EGM57/003

TURQUOISE BLUE LIQUID ENGOBE UNLEADED EGM53/004

Liquid blue engobe ready for use EGM53/004

Firing temperature : 980-990°C°C

Without lead

LIQUID ENAMEL WITH EESP49 EFFECT ORANGE

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL WITH EESP47 EFFECT GREEN

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL EESP46 EFFECT BLACK

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL WITH EESP44LL EFFECT WITH GOLDEN HIGHLIGHTS 1KG

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL WITH EESP30 BEIGE EFFECT

The EESP series is liquid, in jars.   

Temperature : 980-1080°C

Speckled blue EESP26LL in 1kg

Liquid glaze without lead

GROUPE I

Firing temperature: 980°C

Lead teal green cadmium enamel - EECS 12

Cadmium selenium effect.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.

Lead free cinnamon brown cadmium enamel - EECS 07

Cadmium selenium effect.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.

Lead free cardinal red cadmium enamel - EECS 03

Cadmium selenium effect, bright red.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.

MOLDING CLAY TOOL IN BOXWOOD 16 CM- UNIT

Molding clay tool 16 cm

Ref : EBA

Light grey stoneware & porcelain engobe - EASP15

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

LIQUID SLIP STONEWARE & PORCELAIN EASP04LL MAKE-UP 1KG

Stoneware & porcelain make-up slip - EASP04LL

Liquid slip in 1 kg jar

Collection suitable for single-firing (with the addition of 5% Monocol V for the powder engobe) and double-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder form.

 

At earthenware temperature, colors will be more pastel than presented.


Advice :

Firing range 980 - 1280°C

Application by brush, dip or spray.

LIQUID SLIP STONEWAR & PORCELAIN EASP01L WHITE 250GR

White stoneware & porcelain engobe - EASP01L

Liquid in 250gr

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips :

Firing range 980 - 1280°C

Brush application, soaking or spraying.

GLAZE WITH EFFECT E21017/78 LUSTER BROWN PURPLE AVENTURINE WITHOUT LEAD

Lustre crimson "Aventurine"

Ref : E21017/78

BLACK LUSTER AVENTURINE GLAZE UNLEADED  E21017/69

Lustre black  "Aventurine"

Ref : E21017/69

Lustre orange crimson  "Aventurine"- E21017/50

Opaque glaze with effects
Without lead
Temperaure of firing : 980°C

Melting N°20  Melting without lead for série P

GROUPE I

Firing temperature: 900-950°C

DURCI'DUR® Anise green Classic Range - DDV1.5

Natural clay with hardener, for modeling that hardens to air without the need of firing.

Dries in 24-48h depending on the thickness to give realizations resistant to shocks.

European Standard Toys EN-71/3.

Don’t stain the hands.

Does not fire, does not enamel.

Available in several colours.

D99 SUNSHINE YELLOW PIGMENT DYE

Sunshine yellow

Ref : D99

COLORS TO BE PAINTED D SERIES Our D series from Solargil is a range of very fine coloring oxides with flux incorporated in the formula.

Miscible with each other to vary the shades, they can be used under glaze or on enamel, and can also be used to color enamels: between 4 and 9% in a transparent base and between 6 and 15% in a white base.

 
Tips:

Firing temperature 950-1250°C

 

Formula: Zr-Si-Co-Ni

Green vanadium D95

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Si-Pr-V

White opaque D60

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Zr-Ce-Si

Copper green D29

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing temperature: 950-1200°C

Formula: Cu-Zn

Turquoise blue D27

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing : Temperature: 950- 1250°C

Formula: Zr-Si-V

Blue sky D218

Colouring oxide range with unlead fondant incorporated in the formula.

Possibility to mix those colours and to use them on or under the glaze.

 Firing température 980-1020°C

Formula: Zr-V

Blue green D203

Colouring oxide range with unlead fondant incorporated in the formula.

Possibility to mix those colours and to use them on or under the glaze.

Firing température 980-1020°C

Formule: Cr-Co

Chromium green D105

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing température 950-1050°C

Formula: Cr-Zr-Si-Pr

Cement grey D100

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing température 950-1250°C

Formula: Zr-Si-Co-Ni

Pink D07

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing température 950-1200°C

Formula: Sn-Cr

COLOR D02 BROWN

Brown D02

 Ref : D02

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes :between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Zr-Si-Al

Red - CS 210

This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.

Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.

To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.

Victoria green - CS 209

This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.

Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.

To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.

Green - CS 208

This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.

Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.

To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.

Yellow - CS 207

This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.

Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.

To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.

Turquoise blue - CS 200

This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.

Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.

To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.

Alkaline crackle transparent enamel - CQ 01 (FR6)

Composed of Fritte.

Cracked and shiny transparent email.

Its application is recommended on white or engobées pasta to appreciate the aged effect of cracking.

Allows decoration under enamel with burnt dye oxides.

Once the piece is cooked, it is recommended to use Judean Bitumen to bring out the cracked effect.

Other enamels can be used as aditives to increase the dilation coefficient.

The firing temperature varies between 940-980ºC.

Cornish Stone ( cornwall ston)

Colemanite Borate de Calcium hydraté

Set of 2 clips for the collectorfor potter's wheel PWD, PWCT, TE9, etc...

Ref : CLIPPW

White grog 0-0.2mm

IMPALPABLE PORCELAIN GROG

SOLARGIL® porcelain chamotte

Ref : CHAMP

SET WASHER Ø 75 MM + PIN L 70 MM FOR STAINLESS STEEL ROD M6

Used with an M6 threaded stud DRT type.