Français
Black ebony stoneware grog 25% 0-1 mm - GN01
Black Mid Fire with grog 0 to 1 mm
Very fine red - orange earhenware smooth - CATALANE
Red stoneware Brasil grog 40% 0-1 mm - BRASIL01
Groged
'Boréal Stone', refractory white stoneware with 70% white grog molochite 0-3 mm - BOREST
Peculiarity of Solargil ® VD, this stoneware is formulated with white clays from Spain and England.
Black stoneware African Stone 40% grog 0-3 mm - AFRICS0-3
Very plastic clay, firing of a beautiful black in oxidation and black metallic in reduction.
Avoid too thin parts and program a very slowly firing in order to prevent bubble due to manganese.
COLOUR ALF OPAQUE CHROMIUM GREEN VP3317
Chromium green VP3317
Color for decoration of porcelain VP set.
Appliance with brush, serigraphy or aerography. To decorate on fired glaze : earthenware or porcelain.Appliance with thickness
Temperature : 700-800°C
GROUPE II
Transparent glaze - TSP 2
Composed of Frit.
Clear crystalline lead free.
For enamelling ceramic parts.
Admits the addition of dyes with excellent color development.
Has a firing interval between 1020-1080ºC.
PIGMENT N. CALCINED SIENNA 6211
6211 Siena Calcined
Ref : TSC
6211 Fired sienna
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
REFRACTORY BRAIDED STRIP 2 MM THICK, 50 MM WIDE PER ML
Flat ceramic strip Thickness 02mm Width 50mm - Le ml
Ref : TRESBAN2
Ceramic rope 1320°C Ep 2 mm Larg 50 mm
Ceramic tape
6270 Brown earth
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
Semi-rigid abrasive pad with diamond coating - TAMPONABP60
To sand enamel or clay splinter on your pieces.
Large grain (P 60) Green
w. 55 x L. 90 x H. 27 mm
Semi-rigid abrasive pad with diamond coating - TAMPONABP120
To sand enamel or clay splinter on your pieces.
Medium grain (P 120) Black
w. 55 x L. 90 x H. 27 mm
Refractory métal stilts T° 1200°C D 100 mm
SET WIRE MODELING TOOLS STAINLESS STEEL 15 CM
Ref : SET5MIR
LARGE MIRETTES SHORT LENGTH CUTTING WIRE H. 20 CM N ° 3
Coiled ribbon tools H 20 cm N°3
Ref : SC10
Lead-free opaque white satin enamel - PR20 (PR20/N)
The firing temperature varies between 980-1100ºC.
Extra white zircon enamel - PR 112
Composed of Frit.
Lead-free Opaque White Enamel.
Slightly bluish white enamel, studied for food, decorative or sanitary ceramics by firing above 1100ºC, in single or double firing.
Recommended temperature, between 1050-1150ºC.
Kiln refractory plates 1340 ° C max 305 x 13mm round batt
Plate 450x450x13mm Weight 5.7 kg
Fragile material, can not be sent by post.
Foam brush with wood handle widht 50 mm - PB50R6
PIGMENT P32 OCEAN GREEN
Ceramic pigment ocean green P32
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
ORANGE YELLOW PIGMENT P316
Orange yellow P316
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
RED OCHRE PIGMENT P17
Ceramic pigment Red ochre P17
P set colouring oxides lik Pur.
Simple ribbon tools L. 220 mm N°12 - MIR47
INSULATING SEALANT CARTRIDGE 1400 ° C MAX
Pasty insulating sealant cartridge to fill the crack in your furnace 1400 ° C/2552°F max
Deep red M7510
Cadmium glaze with lead
Temperature of firing 960-1020°C
SCRAPER FOR DRY CLAY 40*60 MM KY104
Set of 9 double stainless steel tools 140 mm
Ref : KIT9OUTILSINOX
CONNECTION CLAMP FOR RESISTOR WIRE OF 16A MAX
Ref : GRIFFE16
GLAZE GE413 GREY TRANSPARENT. BIG THICKNESS. WITHOULEAD
Grey
Ref : GE413
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
AZAFATA BLUE TRANSPARENT BIG THICKNESS UNLEADED : GE411
Azafata blue
Ref : GE411
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
CELESTIAL BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED GE410
Celestial blue
Ref : GE410
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
