Smooth Valencia porcelain - PSAF
Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002
ROUND METAL REFRACTORY SUPPORT Diam. 60 mm 1280°C
Simple refractory support Ø 60 H 17 mm n°49-60
Ref : SUP60MR
Single steel stilt Ø 60 H 17 mm n°49-60
LARGE MIRETTES SHORT LENGTH CUTTING WIRE H. 20 CM N ° 31
Coiled ribbon tools N°1 H 20 cm -
Ref : SC8
Complet kit Including, the probe type thermometer + K (1200 ° C) 250mm long + 3m compensating cable.
This kit comes fully assembled. Without batteries
Brown humus jaspé GEESP000/18
GROUPE I
Firing temperature 980-1280°C
AQUAMARINE BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE408
Blue aquamarine
Ref : GE408
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
DURCI'DUR® White Classic Range - DDB1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
COLOUR LEAD FREE CD11 BLACK
Black- CD11
Without lead
Firing temperature: 980-1280°C
Formula: Co-Fe-Cr-Mn
Bright deep blue 06004
Bright deep blue 06004
Glazes for stoneware and porcelains
Temperature of firing : 1250-1320°C
Use Stoneware Glazes on any midrange clay body.
These glazes are intended for use at 1250-1320°C