Français
Deutsch
Italiano
Español
STAINLESS STEEL TOOLS FRI375 DOUBLE POINT ARROW AND SPATULA IN THE SHAPE OF ROUNDED SPOON L 155 MM
Double stainless steel tool
Arrow point with cutting edges for details and cutting on the other side small spatula curved spoon-shaped pointed and rounded for fine work on the ground
Non-slip handle
Total length 155 mm
Ref : FRI375
STAINLESS STEEL TOOLS FRI367 DOUBLE SCALPEL AND SPATULA L 160 MM
Double stainless steel tool
Cutting scalpel for details and cutting and small curved spatula for fine soil work
Anti-slip handle
Total length 160 mm
Ref : FRI367
Black partition F4312CD
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe. Colors are used deluted with water to obtain a thick mix. CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Fiiring temperature : 940-1050°C
Soft stainless steel palette cocked 153 x 81 mm - EST313S
Soft stainless steel palette half rectangular 120 x 60 mm - EST309S
Soft stainless steel palette half-moon 120 x 50 mm - EST305S
Hard stainless steel palette half-oval 100 x 51 mm - EST303R
Dark blue - ES244
Temperature of firing : 950-1050°C
Groupe III
With lead
Liquid lilac engobe ready for use EGM62/001 underglaze
Firing temperature : 980-990°C°C
Without lead
LIGHT GREEN LIQUID ENGOBE UNLEADED EGM55/004
Liquid green engobe ready for use
Firing temperature : 980-990°C°C
LIQUID ENAMEL WITH EESP42 GREEN EFFECT
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP41 EFFECT RED
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP40 EFFECT TURQUOISE GREEN
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP33 YELLOW-ORANGE EFFECT
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
Liquid glaze Speckled beige without lead EESP29
GROUPE I
Firing temperature: 980°C
Speckled white
GROUPE I
Firing temperature: 980°C
Speckled cream - EESP06
GROUPE I
Firing temperature: 980°C
Glittery black EESP01
Groupe I
Firing temperature: 980°C
Lead free spinach green cadmium enamel - EECS 11
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free marsala red cadmium enamel - EECS 05
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free red poppy cadmium enamel - EECS 04
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
