Français
Deutsch
Italiano
Español
Lead free gold button cadmium enamel - EECS 01
Cadmium selenium effect, dark yellow.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
ENGOBE GRES & PORCELAIN EASP12 AZURE BLUE
Azure blue stoneware & porcelain engobe - EASP12
Powder
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Brown stoneware & porcelain engobe - EASP08
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
LIQUID SLIP STONEWAR & PORCELAIN EASP01L WHITE 250GR
White stoneware & porcelain engobe - EASP01L
Liquid in 250gr
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
LUSTER AVENTURINE GLAZE UNLEADED E21017/73
Lustre crimson "Aventurine"
Ref : E21017/73
DOLAFLUX B is suitable for the deflocculation of most silicate ceramic raw materials
Marin blue D28
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing temperature: 950-1250°C
Formula: Co-Si-Al
Yellow D15
Colors to paint D Set.
These products are a range of are very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Advice :
Température : 950-1250°C
Formula: Zr-Si-Pr
MIRETTE SIMPLE STAINLESS STEEL ROUND WIRE 20 CM
Classical sculpture tool in stainless steel, for clay, ceramic, wax, etc... L. 20 cm - CT1116
Ochre - CS 218
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Cobalt blue - CS 214
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Purple - CS 204
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Black - CS 202
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
CONE ORTON TYPE - FUSEWATCH Box of 50
Ref : CONEBOITE
COLORANT LIQUIDE SANS PLOMB CD19 ROSE CLAIR
Rose clair
Réf : CD19
Gamme de couleurs sans plomb pour la décoration avec fondant incorporé dans la formule.
Ces couleurs sont miscibles entre elles sur et sous émail.
Formule: Cd-S-Se-Zr-Si
Température cuisson: 980-1280°C
COLOUR FREE LEAD CD18 BEIGE KAKI
Beige kaki- CD18
Without lead
Firing temperature: 980-1280°C
Formula: Al-Cr
COLOUR LEAD FREE CD12 BROWN
Brown- CD12
Without lead
Firing temperature: 980-1280°C
Formula: Cr-Fe-Zn
