Français
Deutsch
Italiano
Español
TRANSPARENT MATE LIQUID GLAZE WITHOUTLEAD SOL01/009L
Transparent mate liquid glaze SOL01/009L
Transparent crackled glaze SOL01/004
Without lead
Firing temperature : 1000-1300°C
Coefficient of dilatation: 101
Ivory white enamel - SIGLO XV
Opaque glossy white enamel.
This is an enamel studied to imitate antique white enamels which have a slightly yellowish (dirty white) tone.
We recommend using the special color series for decorating SIGLO XIII-type pieces.
Can be used indifferently on white and red paste.
The recommended firing temperature varies between 950-1000°C.
Crystallized brown S3A
Lustres glazer with lead
Temperature for firing : 850-990°C
Presence of lead. Use only for decorative products
Wooden roller to spread the earth - RP-S
Length 25 cm
Axle on a bearing ø 50 mm
Electronic Potter wheel on feet PW-DCT LEG
Power 250 W en 220 V (1/3 CV)
Dimensions : L 530 x P 680 x H 510 mm .
Wheel head diameter 300 mm .
Collector in plastic in 2 parts which can be easily dismantled.
Silencious potter's wheel.
direction: Clockwise or Anti-clockwise.
Variable speed to 0 at 300 RPM.
Quiet: 55 dB.
Weight 35 kg .
Capacity : 15 kg max
Forged stainless steel modeling double-end tool for clay L. 17.8 cm - PTS2411
Transparent glaze - PR O
Composed of Frit.
Transparent varnished which has been specially studied for pieces of pottery which must contain food.
It adapts correctly both to popular earthenware (red clay) in double firing, as in single firing, because in its formulation, products are included which favor its adhesion to the soil.
It admits the addition of coloring oxides and in particular the natural ones (Cu, Co, Mn, Fe, ....).
It perfectly develops both underglaze colors and our range of colored engobes.
The firing temperature varies between 930-980ºC. At temperatures above 970ºC, kaolin or clay should be added.
Bright white zircon enamel - PR 6303 F
Composed of Frit.
Bright opaque white enamel, lead free. Recommended for parts for food use.
For the enameling of ceramic pieces in red or white earth, especially those which must contain food.
Can be colored with natural oxides or calcined type P series. If the room must contain food, use lead-free dyes. The application can be done with a bath, brush, spray gun or screen printing.
Firing temperature between 1000-1020ºC where the enamel shows its best development.
Bright white zircon enamel - PR23
Composed of Frit.
It is an enamel specially designed for pottery and tiling.
Admits decoration well.
The firing temperature varies between 950-1000ºC.
KILN PLUTON 3S 76 L 1320° TOPLOADER
Stainless carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramic fiber
