Best sellers

Lead free cardinal red cadmium enamel - EECS 03

Cadmium selenium effect, bright red.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.

MOLDING CLAY TOOL IN BOXWOOD 16 CM- UNIT

Molding clay tool 16 cm

Ref : EBA

Light grey stoneware & porcelain engobe - EASP15

Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder.

At earthenware temperature, the colors will be more pastel than presented.

Tips /

Firing range 980 - 1280°C

Brush application, soaking or spraying.

LIQUID SLIP STONEWARE & PORCELAIN EASP04LL MAKE-UP 1KG

Stoneware & porcelain make-up slip - EASP04LL

Liquid slip in 1 kg jar

Collection suitable for single-firing (with the addition of 5% Monocol V for the powder engobe) and double-firing with maximum color development at 1280°C.

These engobes are available in liquid or powder form.

 

At earthenware temperature, colors will be more pastel than presented.


Advice :

Firing range 980 - 1280°C

Application by brush, dip or spray.

GLAZE WITH EFFECT E21017/78 LUSTER BROWN PURPLE AVENTURINE WITHOUT LEAD

Lustre crimson "Aventurine"

Ref : E21017/78

Lustre orange crimson  "Aventurine"- E21017/50

Opaque glaze with effects
Without lead
Temperaure of firing : 980°C

Melting N°20  Melting without lead for série P

GROUPE I

Firing temperature: 900-950°C

DURCI'DUR® Anise green Classic Range - DDV1.5

Natural clay with hardener, for modeling that hardens to air without the need of firing.

Dries in 24-48h depending on the thickness to give realizations resistant to shocks.

European Standard Toys EN-71/3.

Don’t stain the hands.

Does not fire, does not enamel.

Available in several colours.

D99 SUNSHINE YELLOW PIGMENT DYE

Sunshine yellow

Ref : D99

COLORS TO BE PAINTED D SERIES Our D series from Solargil is a range of very fine coloring oxides with flux incorporated in the formula.

Miscible with each other to vary the shades, they can be used under glaze or on enamel, and can also be used to color enamels: between 4 and 9% in a transparent base and between 6 and 15% in a white base.

 
Tips:

Firing temperature 950-1250°C

 

Formula: Zr-Si-Co-Ni