Foldable disposable 3M mask class P3 (ffp3) - MASQUEU
Ultra light, very enveloping.
With exhalation valve filtering against dust and fibrogenic particles.
M6889 BLUE GLAZE
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis. Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Advice :
Firing temperature : 960-1020°C
Mentions :
Presence of lead. Do not use for alimentary products. Only for decorative products
LOT 2 RULES manual work in wood with a thickness of 5 mm.
Ref : LOTRE5
The little illustrated guide to ceramics _ LCAHIERS
engobes
Les cahiers de Terres et couleurs
Marie-Pierre Lamy
40 pages
French
KIT DIGITAL THERMOMETER PROBE TYPE S 1400°C + 3 M CABLE
Ref : KITTHERS
Complet kit including, thermometer, probe type S (1400 ° C) 250mm + 3 meters compensating cable.
This kit comes fully assembled.
Complet glaze kit with Compressor + Spraygun + Air hose 5 meters + connection
Spraygun in 1.8 mm
6230 Havana Yellow
Pigment of mineral origin.
These are very finely ground earths or rocks (ochres, earths, natural oxides).
Highly resistant to light (unalterable to ultraviolet rays), they are non-toxic, have a very high covering power and are miscible with each other.
OIL FOR SCREW VACUUM PUMP / THE LITER
OIL for screw vacuum pump (grey pump) : the liter
Connection claw for heating element of 30 A max
BROWN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE405
Brown
Ref : GE405
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
YELLOW TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE401
Yellow
Ref : GE401
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C







