Français
Deutsch
Italiano
Español
Set of 3 alternative heating elements for kiln of 75 liters 1300°C BENJAMIN 4G
Please, always indicated the serie's number of your kiln.
JEU DE 3 RESISTANCES 1300°C HELIOS 110 L
Réf : RESHELIOS
Base R1 - RAKU1
Glaze for Raku
Temperature of firing : 800-900°C
Groupe I
Without lead
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis. Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Temperature of firing : 800-900°C
Groupe III -Presence of lead.
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis.
Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Advice :
Temperature of firing : 800-900°C
Coefficient of expansion: 104
Mentions :
Presence of lead. Do not use for alimentary products. Only for decorative products
TABLE TOP WHEELS
Electronic Potters wheel PW-DCT with foot pedal.
Forged steel modelling tool stainless steel for clay L. 17.8 cm
Ref : PTMP020
CERAMIC SCULPTURE TOOL IN STAINLESS STEEL
Extruding barel for EX-115 model.
6 Models.
Square tube EXT 37 mm INT 25 mm - EXT 63 mm INT 50 mm.
Octogon tube EXT 32 mm INT 22 mm - EXT 53 mm INT 44 mm.
Round tube EXT 37 mm INT 25 mm - EXT 62 mm INT 50 mm.
Transparent lead-free powder enamel - PR99
Composed of Fritte.
For enamelling of white earthenware.
We can decorate under and on enamel.
Obtaining coloured enamels by adding dyes from the "P" series.
Firing temperature between 1000 and 1100ºC.
Transparent glaze - PR 47
Composed of Frit.
Shiny transparent enamel with a high amount of calcium.
Recommended as a base for producing colored enamels with coloring oxides compounds based on calcium, such as for example the base of (Cr, Sn, Ca).
Rutile base when looking for a lead enamel with a high melting viscosity which must be used at a temperature above 1000º C.
The firing temperature varies between 980-1050ºC.
Glossy white enamel - PR 125
Opaque white enamel.
For the enameling of ceramic pieces in white or red earth.
It can be applied both by dipping and spraying.
The recommended firing temperature is between 980-1000ºC.
