Best sellers

ILMENITE - FERROUS TITANIUM

TiO2.FeO

Pm 152

GAS OVEN HGR-TI-EKO-260 BRICKS 260 L 1320°C

Ref : HGRTIEKO260

Brick insulated gas oven front loading - HGRTI EKO 260 1320 °C

Reverse draft for oxidizing or reducing firing

Economical model of 400 liters in total or 260 liters useful (usable for firing)

Model HELIOS electric oven in stainless steel capacity 110 liters 1300 ° C maximum.

Electric kiln 1300°C HELIOS build in stainless steel Capacity 110 liters

Ref : HELIOS1300

 Grip for trimming

Ref : GRIPTOUR

TOOL SCULPTURE STAINLESS STEEL 18 CM GH2104

Double stainless steel tool of L. 18 cm

Ref : GH2104

Length tip 40 mm

Width of tip 10 mm

Thickness at most 2 mm

Forged stainless steel modeling double-end tool for clay

CARVING TOOL STAINLESS STEEL 18.5 CM GH2103

Stainless steel tool of L. 18.5 cm

Ref : GH2103

Length loop 14 mm

Loop diameter 7 mm

Forged stainless steel modeling double-end tool for clay

AUBERGINE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE412

Aubergine / Eggplant

Ref : GE412

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

TURQUOISE GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE407

Turquoise green

Ref : GE407

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BORDEAUX TRANSPARENT GLAZE BIG THICKNESS UNLEADED :  GE404

Bordeaux wine

Ref : GE404

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BEIGE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE402

Beige

Ref : GE402

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE313 BLUE ELECTRIC TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue electric 

Ref : GE313

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE312 BLUE SKY TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue sky

Ref : GE312

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C