Best sellers

MIRETTE 17CM INOX COUPANTE CRS1

Réf : CRS1

Longueur : 170 mm

CUTTING TOOL L 220 MM N°9

Simple ribbon  tools L. 220 mm N°9 - MIR78

Ribbon tool N°10 - MIR52

Sculpting Tools

White smooth modeling clay - MBLANC10

Red cadmium enamel - M7506

Intense red, opaque and shiny enamel.

For the enameling of ceramic pieces in red or white clay.

You can enamel by dipping or with a gun.

Recommended firing temperature between 960-1000ºC.

Glossy white enamel - M 5148

Composed of Frit.

Zircon Opaque White Enamel, lead free, which makes it suitable for all kinds of edible pottery.

Admits decoration very well. We recommend the use of lead-free pigments when the room to be decorated must contain food.

The firing temperature varies between 960-980ºC.

LOT OF 5 CALES 50 x 50 x 20 MM 1340°C

Ref : LOTCALE

blade 40 x 80 mm - KY113A

Shred

Set of 9 double stainless steel tools 140 mm

Ref : KIT9OUTILSINOX

BALL CLAY HYMOD EXCELCIOR

Ref : IMOD

CORAL TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE403

Coral 

Ref : GE403

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Matte transparent enamel - G 1005

Composed of Frit.

Transparent satin zinc and lead enamel.

Can be easily colored.

One must take into account the fact that zinc oxide can be bad to develop certain oxides dyes.

We recommend applying it for white paste and thin layer to avoid opalescences.

The firing temperature varies between 950-1000ºC.