Français
Deutsch
Italiano
Español
Red cadmium enamel - M7506
Intense red, opaque and shiny enamel.
For the enameling of ceramic pieces in red or white clay.
You can enamel by dipping or with a gun.
Recommended firing temperature between 960-1000ºC.
Glossy white enamel - M 5148
Composed of Frit.
Zircon Opaque White Enamel, lead free, which makes it suitable for all kinds of edible pottery.
Admits decoration very well. We recommend the use of lead-free pigments when the room to be decorated must contain food.
The firing temperature varies between 960-980ºC.
LOT OF 5 CALES 50 x 50 x 20 MM 1340°C
Ref : LOTCALE
GLAZING DIPPER 350 ML HANDLE WOODEN 300 MM
Wood handle 300 mm
Ref : KL1M
Set of 9 double stainless steel tools 140 mm
Ref : KIT9OUTILSINOX
CORAL TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE403
Coral
Ref : GE403
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
Matte transparent enamel - G 1005
Composed of Frit.
Transparent satin zinc and lead enamel.
Can be easily colored.
One must take into account the fact that zinc oxide can be bad to develop certain oxides dyes.
We recommend applying it for white paste and thin layer to avoid opalescences.
The firing temperature varies between 950-1000ºC.
STAINLESS STEEL TOOLS FRI375 DOUBLE POINT ARROW AND SPATULA IN THE SHAPE OF ROUNDED SPOON L 155 MM
Double stainless steel tool
Arrow point with cutting edges for details and cutting on the other side small spatula curved spoon-shaped pointed and rounded for fine work on the ground
Non-slip handle
Total length 155 mm
Ref : FRI375
STAINLESS STEEL TOOLS FRI367 DOUBLE SCALPEL AND SPATULA L 160 MM
Double stainless steel tool
Cutting scalpel for details and cutting and small curved spatula for fine soil work
Anti-slip handle
Total length 160 mm
Ref : FRI367
Black partition F4312CD
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe. Colors are used deluted with water to obtain a thick mix. CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Fiiring temperature : 940-1050°C
Soft stainless steel palette cocked 153 x 81 mm - EST313S
Soft stainless steel palette half rectangular 120 x 60 mm - EST309S
Soft stainless steel palette half-moon 120 x 50 mm - EST305S
Clear green- ES263
Temperature of firing : 950-1050°C
Groupe III
With lead
Liquid lilac engobe ready for use EGM62/001 underglaze
Firing temperature : 980-990°C°C
Without lead
LIGHT GREEN LIQUID ENGOBE UNLEADED EGM55/004
Liquid green engobe ready for use
Firing temperature : 980-990°C°C
LIQUID ENAMEL WITH EESP42 GREEN EFFECT
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP41 EFFECT RED
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP40 EFFECT TURQUOISE GREEN
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP33 YELLOW-ORANGE EFFECT
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
Liquid glaze Speckled beige without lead EESP29
GROUPE I
Firing temperature: 980°C
Speckled white
GROUPE I
Firing temperature: 980°C
Speckled cream - EESP06
GROUPE I
Firing temperature: 980°C
Glittery black EESP01
Groupe I
Firing temperature: 980°C
Lead free spinach green cadmium enamel - EECS 11
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free marsala red cadmium enamel - EECS 05
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free red poppy cadmium enamel - EECS 04
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free gold button cadmium enamel - EECS 01
Cadmium selenium effect, dark yellow.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
ENGOBE GRES & PORCELAIN EASP12 AZURE BLUE
Azure blue stoneware & porcelain engobe - EASP12
Powder
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
