Français
Deutsch
Italiano
Español
HOLE BRASS CUTTER DIAMETER 6 MM PERF82
Hole brass cutter Ø 6 mm L. 160 mm - PERF82
HOLE BRASS CUTTER DIAM 12 MM CUPPER PERF81
Hole brass cutter Ø 12 mm L. 160 mm
Ref : PERF81
BEIGE PATINA PIGMENT
6223 Beige Patina
Ref : PABE
Pigment of mineral origin.
They are earth or rock very finely ground (ochres, earths, natural oxides).
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
BLUE PIGMENT P82
Blue P82
P set colouring oxides lik Pur.
PINK OCHRE PIGMENT P62
Pink ochre P62
P set colouring oxides lik Pur.
ORANGE PIGMENT P532
orange P532
P set colouring oxides lik Pur.
RED BROWN PIGMENT P50
Red brown P50
P set colouring oxides lik Pur.
NUT BROWN PIGMENT P37
Ceramic pigment Nut brown P37
P set colouring oxides lik Pur.
YELLOW PIGMENT P330
Ceramic pigment Yellow dark P300
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
PINK PIGMENT P325
Pink P325
Range of colouring oxides to color glazes: 1to 5% in a transparent glaze and 1 to 10% in a white glaze.
BROWN PIGMENT P18
Brown P18
Ceramic pigment
P set colouring oxides lik Pur.
COLOURING OXIDE P127 LILAC PURPLE
lilac purple P127 / N
GREY PIGMENT P108
Grey P108
set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
Gold to appliance with brush
Ref : OR12
Groupe I
Firing temperature: 650-750°C
Gold to appliance with brush
Ref : OR10
Groupe I
Firing temperature: 650-750°C
PIGMENT OXYDE DE COBALT BLEU 6410D
6410 Cobalt D blue
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
Black- N3320M/7 dur
GROUPE III
Firing temperature: 980-990°C
Pink natural Modelling clay firing Dark Pink
For initiation in clay. Adapted for modelling, stamping and throwing.
It dries in 3-4 days around with room temperature conditions.
CAUTION : realisations may crumble if you do not fire.
Firing temperature : 950-1050°C
It can not be glazed.
MONOCOLLE III VINYL RESIN LIQUID GLUE
Ref : MONOIII
Liquid vinyl resin
SHORT GUTTING TOOL 120 MM N°2
Simple ribbon tool stainless steel L. 120 mm N°2 -MIR74
DOUBLE CUTTING TOOLS L 170 MM N°7
Double ribbon tools L. 170 mm N°7 - MIR44
Foldable disposable 3M mask class P3 (ffp3) - MASQUEU
Ultra light, very enveloping.
With exhalation valve filtering against dust and fibrogenic particles.
The little illustrated guide to ceramics _ LCAHIERS
engobes
Les cahiers de Terres et couleurs
Marie-Pierre Lamy
40 pages
French
KIT DIGITAL THERMOMETER PROBE TYPE S 1400°C + 3 M CABLE
Ref : KITTHERS
Complet kit including, thermometer, probe type S (1400 ° C) 250mm + 3 meters compensating cable.
This kit comes fully assembled.
Complet glaze kit with Compressor + Spraygun + Air hose 5 meters + connection
Spraygun in 1.8 mm
6230 Havana Yellow
Pigment of mineral origin.
These are very finely ground earths or rocks (ochres, earths, natural oxides).
Highly resistant to light (unalterable to ultraviolet rays), they are non-toxic, have a very high covering power and are miscible with each other.
OIL FOR SCREW VACUUM PUMP / THE LITER
OIL for screw vacuum pump (grey pump) : the liter
Connection claw for heating element of 30 A max
CONNECTION CLAMP FOR RESISTOR WIRE OF 16A MAX
Ref : GRIFFE16
BROWN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE405
Brown
Ref : GE405
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
YELLOW TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE401
Yellow
Ref : GE401
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
