Français
Deutsch
Italiano
Español
Glaze Copper green XP3048
Groupe I
Firing temparature: 960-1050°C
Sculpture loop toll in stainless for clay L. 18,5 cm - WMT1006
Double inox trimming tool round cut L. 13 cm
Ref : WMT1001
Smooth culinary white earthenware - FBAF
COULOUR ALF OPAQUE YELLOW VP3115
Yellow VP3115
Color for decoration of porcelain VP set.
Appliance with brush, serigraphy or aerography.
To decorate on fired glaze : earthenware or porcelain.Appliance with thickness
Temperature : 700-800°C
GROUPE II
Stem turning tool stainless square end - TT4519
155 mm
Turning tool stainless steel round tip - TT4513
155 MM
Trimming tool stainless steel triangle point arc - TT4507
155 MM
Turning Tool
6210 Natural sienna
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
Steel banding wheel double sided - TOURDB22
Ø 220 et 150 mm
H. 60 mm
SAFETY PROBE FOR R440 AND BGAT GAS BURNER
Safety probe for BG/AT burner
Ref : SONSECUBRU
Probe safety gas burner
Aquamarine liquid glaze SOL05/111
Without lead
Firing temperature : 980-990°C
Green lime liquid glaze SOL05/103
Without lead
Firing temperature : 980-990°C
Ultramarine blue liquid glaze SOL03/103
Without lead
Firing temperature : 980-990°C
Transparent crackled glaze SOL01/004
Without lead
Firing temperature : 1000-1300°C
Coefficient of dilatation: 101
WOOD BATT for potters wheels PWDC and TE9 WEELY
For wheel head equipped with device for quick change of MDF wooden batts
Ref : SIT370
SEROGRAF MEDIUM SERIGRAPHIC
Ref : SEROG
SEROGRAF sérigraphic medium fast drying
CONTROLLER ATR902 FOR ELECTRIC KILN
Temperature controllers ATR902 - 12ABC with microprocessor
Ref : REGULATR902
Plug-in process controller 15 cycles / 18 steps
Plug-in process controller, multi-poles connector, single loop.
It enables the programming of 15 cycles/programs which might include anything up to 18 steps/segments, all free selectable by the operator as rising/dwell/cooling steps.
Distinctive feature is the extremely user-friendly programming, easy to handle even for the unskilled operator.
To adapt this regulation ATR902 on your oven, you will have to indicate us:
The maximum temperature of the oven
The type of the probe or thermocouple (S or K normally)
The power of your oven in KW
Caution!
Without the right parameters the control will not work properly.
Alternative socket 8 pôles for ATR900 (fixation on the kiln SBM-S)
Racking for controller ATR902 (or old ATR-900 and ATR-901)
Melting to lower the firing temperature - PR 32
Composed of Frit.
LEAD FREE CLEAR MELTING ENAMEL.
For the enameling of ceramic pieces in red or white clay.
Lead free fondant to add to enamels that need to increase fusibility.
Optimal firing temperature between 850-900ºC.
White enamel for undercoat - PR 120 BB
Composed of Frit.
For glazed tiles on the bisqueware.
Then apply a thin layer of transparent enamel.
The firing temperature varies between 960-1000ºC.
Kiln shelves temperature 1340 ° C max 400x400x13mm
Plate 400x400x13mm Weight 4.3 kg
Fragile material, can not be sent by post.
Kiln shelves temperature 1340 ° C max 300x300x13mm
Plate 300x300x13mm
Weight 2.3 kg
Fragile material, can not be sent by post.
