Français
Deutsch
Italiano
Español
Deep red M7510
Cadmium glaze with lead
Temperature of firing 960-1020°C
SCRAPER FOR DRY CLAY 40*60 MM KY104
GLAZE GE413 GREY TRANSPARENT. BIG THICKNESS. WITHOULEAD
Grey
Ref : GE413
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
AZAFATA BLUE TRANSPARENT BIG THICKNESS UNLEADED : GE411
Azafata blue
Ref : GE411
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
CELESTIAL BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED GE410
Celestial blue
Ref : GE410
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
STAINLESS STEEL TOOLS FRI125 DOUBLE BALL LENGTH 105 MM
Double ball stainless steel tool
Tool for details and earth work
Round tip diameter 8 mm and 11 mm
Total length 105 mm
Ref : FRI125
Calcareous Silico Alcalino frit (SIO2 NAKO) - FR4
Soft stainless steel palette kidney 75 x 50 mm - EST310S
Soft stainless steel palette half rectangular 120 x 60 mm - EST309S
Shiny transparent glaze ES9008
Glazes for stoneware and porcelains
Temperature of firing : 1260-1300°C
Groupe I
Without lead
Transparent glaze cracked ES6031
Glazes for stoneware and porcelains
Temperature of firing : 1250-1300°C
Groupe I
Without lead
Opaque matt glaze ES6020
Groupe I
Without lead
Cadmium intense green glaze ES261
With lead
Firing temperature : 950-1050°C
Matt transparent glaze - ES1600
Temperature of firing : 850-1050°C
Coeff dilat 25-300°C: 65
Groupe II
With lead
Liquid black engobe ready for use EGM60/004 underglaze
Firing temperature : 980-990°C°C
Without lead
Liquid lemon yellow engobe ready for use EGM56/003 underglaze
Firing temperature : 980-990°C°C
Without lead
EESP43 EFFECT LIQUID ENAMEL EESP43 EFFECT GREY
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP38 EFFECT RED
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP36 EFFECT SPOT YELLOW
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
Speckled green EESP25
GROUPE I
Firing temperature: 980°C
LIQUID ENGOBE FOR STONEWARE AND PORCELAIN EASP06LL RED 1KG
Collection suitable for single-firing and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
ENGOBE GRES & PORCELAIN EASP03 SALMON
Salmon stoneware & porcelain slip - EASP03
Powder
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Light orange
Ref : E63041/1
Luster orange "Aventurine"- E21017/60
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
Chocolate natural self hardening clay : "DURCI'DUR"
Ref : DDECH1.5
For children upper 3.
Do not stain hands.
No firing is necessary. It dries in 48h around with room temperature conditions.
Realisations are schock resistant.
Do not fire, do not glaze.
Green vanadium D95
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Si-Pr-V
Transparent crackle enamel - CQ 03 (FR7)
Ceramic compound.
TRANSPARENT CRACKED
TRANSPARENT ENAMEL GLOSSY very alkaline and fondant, suitable for raku techniques or metallic reflections.
Specially recommended as ceramic covered.
With the addition of metallic oxides, characteristic colours of alkaline enamels are obtained, as in the case of the CuO for turquoise blue.
The recommended firing temperature ranges from 800-950°C.
COLOUR FREE LEAD CD19 PINK CLEAR
Clear rose- CD19
Without lead
Firing temperature: 980-1280°C
Formula: Cd-S-Se-Zr-Si
COLOUR FREE LEAD CD15 GREEN MEDIUM
Middle green- CD15
Without lead
Firing temperature: 980-1280°C
Formula: Zr-Pr-V-Si
COLOUR FREE LEAD CD14 GREEN DARK
Dark green - CD14
Without lead
Firing temperature: 980-1280°C
Formula:Cr-Si
COLOUR LEAD FREE CD06 RED CARMINE
Red crimson- CD06
Without lead
Firing temperature: 980-1280°C
Formula: Si-Sn-Cr-Ca
Crimson / CARMINE CC10
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 940-1020°C
Free of lead
STRONTIUM CARBONATE
Ref : CARSTR
Molar formula
CO3Sr2
Molar mass: 148
BARIUM CARBONATE
CARBAR
Molar formula:
CO2Ba
Molar mass: 197
Lustre light blue
Firing temperature : 750-820°C
Ref : BLLU700
Bisqueware pressed tile red earthenware - BISCFR150X150X5
ENGOBE WHITE ATOMISED AUBAGNE
Fragmented white engobe AUBAGNE
SCULPTING TOOLS 12 CM ENV. SET OF 10 PIECES
Ribbon tool - Set of 10 pieces
Ref : 904
Sculpting Tools
Matt white opaque enamel - 5880
For glazing red or white earthenware.
Develops colors very well.
The firing temperature varies between 940-1050°C.
GLAZE EFFECT OPAQUE 5656 BLUE LEATHER
Blue leather
Ref : 5656
Coloured effects glaze without lead
Temperature of firing : 960-1020°C
Tomato red transparent enamel - 5650
Range of colored transparent enamels.
They can be applied on white or red engobed paste.
Firing temperature 980 - 1020°C.
Black 5410 opaque
Coloured bright opaque glazes usable on red or white clay.
Temperature of firing 960-1020°C
Groupe II with lead
Advice :
Coeff dilat 25-300°C: 66
Hole cutter with very thin screw diameter 3 mm - 534
Transparent glaze - 5005
Composed of Fritte.
Glossy transparent enamel is widely used for enamelling white majolica, for its excellent transparency, shine and color development.
It can be used for culinary ceramics because it does not give lead solubility under usual working conditions.
Can be decorated both under and on enamel.
It is specially indicated for obtaining coloured enamels.
The firing temperature varies between 980-1050ºC.
White engobe 5000
Temperature of firing : 980-1050°C
Free of lead
Modelling clay tool 16 cm set of 38 pieces -20
Bright transparent matt 0305
Temperature of firing : 1150°C
Groupe I
Red "cerise" 010578 ( Ex E-23010/85) Cherry
GROUPE I
Firing temperature: 1250-1300°C
Green "olive" marbled 010572
GROUPE I
Firing temperature: 1250-1300°C
Black blue 010272
Glazes for stonewares and porcelains.
Temperature of firing : 1250-1300°C
Green gray 010137
Glazes for stonewares and porcelains.
GROUPE I
Firing temperature: 1250-1300°C
Satiny beige 010123
Glazes for stoneware and porcelains
Temperature of firing : 1280°C
UNDERGLAZE LIQUID ENSP18L BLUE MARINE 250GR
Navy blue ENSP18L underglaze
GI without lead
250gr
GLAZE LIQUID EMSP19L SAND MATTE WITHOUT LEAD 250GR
Sand - EMSP19L
Without lead GI
Firing temperature: 980°C
250gr
LIQUID GLAZE EOSP06L LILAC CLEAR OPAQUE WITHOUTLEAD 250GR
Lilac - EOSP06L
GROUP I free lead
Firing temperature: 980°C
250gr
LIQUID ENGOBE ENSP16L CARAMEL 250GR
Caramel ENSP16L
Without lead Groupe 1
250GR
LIQUID GLAZE ETSP26L GREEN COPPER WITHOUT LEAD 250GR
GROUPE I without lead
Firing temperature: 980-1050°C
Jar : 250GR
ENGOBE LIQUID ENSP21L DARK GREEN 250GR
Dark green ENSP21L
Ready-to-use liquid slip
Packaging: 250GR
Group I
Firing 980°C-1050°C
UNDERGLAZE LIQUID ENSP17L BLUE COBALT 250GR
Cobalt blue ENSP17L Underglaze liquid
GI without lead
250GR
UNDERGLAZE LIQUID ENSP07L MAUVE 250GR
Mauve ENSP07L underglaze liquid
250GR
Medium green cadmium enamel - VR 98 AN
Glossy opaque green enamel.
For the enameling of ceramic pieces in red or white clay.
Firing temperature, between 950-1020ºC.
Light blue flecked blue PSE309
PSE range. Liquid glazes with gleams
Advice :
Firing : 980°C
Mentions :
GROUPE II
Presence of lead.
YELLOW OPAC LIQUID GLAZE PSE232
Yellow PSE232
PSE range. Liquid glazes with gleams
POWDER GLAZE ETSP26 GREEN COPPER WITHOUT LEAD
GROUPE I without lead
Firing temperature: 980-1050°C
Green grey ETSP18
GROUPE I
Firing temperature: 980-1050°C
Blue cobalt ETSP02
GROUPE I
Firing temperature: 980°C - 1050°C
POWDER GLAZE ETSP01 TRANSPARENT BRIGHT WITHOUTLEAD
Transparent glaze - ETSP01
UNDERGLAZE LIQUID ENSP12 DARK BLUE
Dark blue ENSP12 underglaze liquid
UNDERGLAZE POWDER ENSP08 GREEN CHROME
Green "chrome" ENSP08
UNDERGLAZE LIQUID ENSP05 ORANGE
Orange ENSP05 underglaze liquid
UNDERGLAZE POWDER ENSP02 YELLOW
Yellow ENSP02
Without lead Groupe 1
Firing temperature: 980°C-1050°C
Red scarlet XP3212/T
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Bright pistachio green XP3054
Free of lead
Temperature of firing : 980-1020°C
Coefficient of expansion: 55
Bright red XP3052/T
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Coefficient of expansion
Small model plastic banding wheel - TTP4
Ø 270 mm
H 37 mm
Trimming tool stainless tools - TT4500
Turning Tool
130 MM
Table slab roller TSR16 clay roller
Wheel tool pointed stainless steel tip wooden handle n°20 - TOURN62
Mediuml model steel banding wheel - TOURN19
Ø 200 mm
H. 110 mm
Small model steel whirler
Ref : TOURN17
