Best sellers

Deep red M7510

Cadmium glaze with lead
Temperature of firing 960-1020°C

SCRAPER FOR DRY CLAY 40*60 MM KY104

GLAZING PIPE 250 ML

Atomizer / mouth sprayer with tank of 250 ml - KL2L

Ceramics pastel in the form of a stick without lead.

18 stick plain colours

BALL CLAY HYMOD EXCELCIOR

Ref : IMOD

GLAZE GE413 GREY TRANSPARENT. BIG THICKNESS. WITHOULEAD

Grey

Ref : GE413

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

AZAFATA BLUE TRANSPARENT BIG THICKNESS UNLEADED : GE411

Azafata blue

Ref : GE411

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

CELESTIAL BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED  GE410

Celestial blue 

Ref : GE410

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Matte transparent enamel - G 1005

Composed of Frit.

Transparent satin zinc and lead enamel.

Can be easily colored.

One must take into account the fact that zinc oxide can be bad to develop certain oxides dyes.

We recommend applying it for white paste and thin layer to avoid opalescences.

The firing temperature varies between 950-1000ºC.

STAINLESS STEEL TOOLS FRI125 DOUBLE BALL LENGTH 105 MM

Double ball stainless steel tool

Tool for details and earth work

Round tip diameter 8 mm and 11 mm

Total length 105 mm

Ref : FRI125

Professionnal cutting tols

Ref : FR378

Soft stainless steel palette kidney 75 x 50 mm - EST310S