Français
6440 Vermeil red
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
Tap for vinegar with cork stopper - ROB
Ø 28 / 32 mm
L. 27 mm
Set of 5 heating element for kiln of 91 liters 1300°C PLUTON 4S
Please, always indicate the serie's number of your kiln.
FULL SET ELEMENTS KILN 1320°C PLUTON2S 60 L
Ref : RESPLU2S
SET OF 3 RESISTANCES BENJAMIN5G 110L 1300°C
Set of 3 spare resistances for 110 liters oven 1300°C BENJAMIN5G
Ref : RESISBENJ5
Set of 3 alternative heating element for kiln of 110 litres 1300°C BENJAMIN 5G
Please, always indicate the serie's number of your kiln
Set of 3 alternative heating elements for kiln of 75 liters 1300°C BENJAMIN 4G
Please, always indicated the serie's number of your kiln.
Inox ruler - REGLED50
L. 500 mm / 2 sides
Base R1 - RAKU1
Glaze for Raku
Temperature of firing : 800-900°C
Groupe I
Without lead
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis. Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Temperature of firing : 800-900°C
Groupe III -Presence of lead.
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis.
Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Advice :
Temperature of firing : 800-900°C
Coefficient of expansion: 104
Mentions :
Presence of lead. Do not use for alimentary products. Only for decorative products
TABLE TOP WHEELS
Electronic Potters wheel PW-DCT with foot pedal.
Forged steel modelling tool stainless steel for clay L. 17.8 cm
Ref : PTMP020
CERAMIC SCULPTURE TOOL IN STAINLESS STEEL
Extruding barel for EX-115 model.
6 Models.
Square tube EXT 37 mm INT 25 mm - EXT 63 mm INT 50 mm.
Octogon tube EXT 32 mm INT 22 mm - EXT 53 mm INT 44 mm.
Round tube EXT 37 mm INT 25 mm - EXT 62 mm INT 50 mm.
Transparent lead-free powder enamel - PR99
Composed of Fritte.
For enamelling of white earthenware.
We can decorate under and on enamel.
Obtaining coloured enamels by adding dyes from the "P" series.
Firing temperature between 1000 and 1100ºC.
Transparent glaze - PR 47
Composed of Frit.
Shiny transparent enamel with a high amount of calcium.
Recommended as a base for producing colored enamels with coloring oxides compounds based on calcium, such as for example the base of (Cr, Sn, Ca).
Rutile base when looking for a lead enamel with a high melting viscosity which must be used at a temperature above 1000º C.
The firing temperature varies between 980-1050ºC.
Glossy white enamel - PR 125
Opaque white enamel.
For the enameling of ceramic pieces in white or red earth.
It can be applied both by dipping and spraying.
The recommended firing temperature is between 980-1000ºC.
Mat white - PR08
With lead
Groupe II
Firing temperature: 980-1020°C
Coefficient of expansion: 58
Red engobe pear small model 40 ml - POIREP
Attention/ Delivered without cannula
KILN PLUTON 4S 147 LITERS SPECIAL SCULPTOR1320°C TOP LOADER
Stainless carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramic fiber
Pluton 1S pottery kiln top-loading capacity 45 liters to 1320 ° C
Stainless steel carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramique fiber
KILN PLUTON 2S 69L SPECIAL SCULPTOR 1320°C TOP-LOADER
Stainless carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramic fiber 1260°C
KILN PLUTON 0S 23 L 1320° TOP-LOADING
Stainless steel carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramique fiber
KILN PLUTON 1S 58L SPECIAL SCULPTOR 1320°C TOP-LOADER
Stainless carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramic fiber
Kiln shelves temperature 1340 ° C max 500x500x20mm
Plate 500x500x20mm Weight 9.9 kg
Fragile material, can not be sent by post.
Extruded kiln shelves (hollow plate) 1350 ° C 1000x600x38mm
Weight 25.8 kg plate 1000x570x38mm
Fragile material, can not be sent by post.
CUT KNIFE HANDLE WOOD HIGH QUALITY PKP08
Steel potters knife curved with wooden handle- PKP08
Digital calliper rule for the reading of disc BPCD
Phoenix recyclable self-hardening natural paste - PHOENIX1
Made with natural clay and flax fiber.
Hardens in 24 hours approx. depending on the thickness of the realization.
Do not fire.
"PERFEKT- 4" spray gun gravity version
HOLE BRASS CUTTER DIAMETER 6 MM PERF82
Hole brass cutter Ø 6 mm L. 160 mm - PERF82
HOLE BRASS CUTTER DIAM 12 MM CUPPER PERF81
Hole brass cutter Ø 12 mm L. 160 mm
Ref : PERF81
Pedal for varying the speed of the potter's wheel
Foam brush with wood handle widht 100 mm - PB100R6
Single Header Sponge Stick
Ref : PB100R6
CHANGEOVER FROM 230 V TO 400 V
Ref : PASS230400
CERAMIC PIGMENT P57 GREEN
Green P57
P set colouring oxides lik Pur.
PIGMENT P47 OLIVE GREEN
Ceramic pigment pur Olive green P47
BLUE COBALT PIGMENT P45 / N
Ceramic pigment pur Cobalt blue P45 / N
P set colouring oxides lik Pur.
ORANGE PIGMENT P43
Ceramic pigment pur Orange P43
P set colouring oxides lik Pur.
GREY OCHRE PIGMENT P42
Ceramic pigment Grey ochre P42
P set colouring oxides lik Pur.
CERAMIC OXIDE P329 RED CORAL
Red coral- P329
CERAMIC PIGMENT P324 PURPLE AUBERGINE
Aubergine purple P324
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze and 1 to 10% in a white glaze.
LIGHT BLUE PIGMENT P250
Ceramic pigment Light blue P250
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
GREEN GREY PIGMENT P218
Green grey P218
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
CERAMIC PIGMENT P214 GREEN PERSIAN
Persian green P214
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
STAIN P137 / N PURPLE
Purple P137 / N
P set colouring oxides lik Pur.
BLUE OF FRANCE PIGMENT P04
Ceramic pigment Blue of France P04
Calcined black copper oxide
Molar formula
CuO
Molar mass: 80
Gold to appliance with brush
Ref : OR8
Firing temperature: 650-820°C
Transparent glaze - NS20M
Composed of Frit.
Lead-free shiny transparent enamel.
For enamelling ceramic pieces in white clay.
Firing temperature between 980-1020ºC.
Copper red N3035
Lustre glazes with lead
Advice :
Temperature of firing : 980-990°C
Mentions :
Presence of lead. Use only for decorative products
Pink natural Modelling clay firing Dark Pink
For initiation in clay. Adapted for modelling, stamping and throwing.
It dries in 3-4 days around with room temperature conditions.
CAUTION : realisations may crumble if you do not fire.
Firing temperature : 950-1050°C
It can not be glazed.
Mitten - GLOVE CERAMIQUE
Good resistance to abrasion
Withstand 800°C in radiation and 500°C in contact
L 450 mm -
SHORT CUTTING TOOL 120 MM N°5 SMALL ROUND
Simple ribbon tool stainless steel L. 120 mm N°5 - MIR77
SHORT CUTTING TOOL N°9 END TRIANGULAR
Ribbon tool N°9 - MIR60
SHORT CUTTING TOOL N°6 TRIANGULAR END OFF-CENTER
Ribbon tool N°6 - MIR58
SHORT CUTTING TOOL N°2 END ROUND MM
Ribbon tool N°2 -MIR56
Ribbon tool N°4 - MIR51
Sculpting Tools
Double ribbon tools L. 185 mm N°10 - MIR45
Grey smooth modeling clay - MGRISE5
Pink color after firing at 980°C (1796°F).
White smooth modeling clay - MBLANC1.5
PRESSURE REGULATOR PROPANE GAS MAX 3 KG FLOW 10KG/H
Ref : MANBGRP007
Sunny deep orange M7514
Cadmium glaze with lead
Temperature of firing 960-1050°C
'To bake' _ LVCUIRE
From clay to ceramics, Firing
What transformations? What firing systems?
Some kiln plans for the amateur
Alain Valtat
142 pages
French
WOODEN ROUNDEL WITH FOOT 350 MM
Ref : LS-02
Modeling wooden board 350 mm with feets
'history of ochre through recipes' _ LOCREEX
from prehistory to the present day
Les cahiers de Terres et couleurs
Félicien Carli
40 pages
French
The little illustrated guide to today's recipes' _ LARGILE
for modern media
Les cahiers de Terres et couleurs
Clément Féron
40 pages
French
GLAZING DIPPER 350 ML HANDLE WOODEN 300 MM
Wood handle 300 mm
Ref : KL1M
Ladle glaze 200 ml - KL1L
Wood handle 300 mm
Kit protection clothing for ceramic fiber or powder
Kit protection with :
Complet protection
Glove
Goggle
Mask class P3 (fiber and powder)
KIT 3 PLATES + 18 PILLARS + 3 PILLARS H 100 MM - PLUTON3S
Ref : KITENFPLU3S
Complet kiln shelves for Pluton 1S 1320°C
All brick vertical kiln TOP-LOADER
Ref : KEOS160S
Capacity 160 liters
ATR902 control included
Power 9 kW at 400 V 16 A
Gross weight: 150 kg (optional 230 V 40 A)
Inner dimensions: Ø 600 mm x H 575 mm
Exterior dimension: Ø mini 810 mm - maxi 1000 mm x H 840 mm
PIGMENT YELLOW ORANGE 6540 D
Orange Yellow
Cadmium pigment
Ref : JO
COMPLETE GASKET SET FOR PERFEKT4 ENAMELLING SPRAYGUN
Set of complete joint
LEMON YELLOW PIGMENT 6520 D
Ref : JC
Lemon Yellow
Cadmium pigment
Pigment obtained by a succession of chemical reactions.
Presented in powder form, in dry state.
CYLINDRICAL JAR ALUMINA 15 L WITH BALL'S DIM EXT Ø 330 * H 450 MM - MGSR150.0
Cylindrical jar 15 liters with ball for roller mill - JAR15L
6451 Royal yellow
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
LOOSE INSULATING FRIT
Ref : ISOL12
Sold by the litre, possibility on request in big bag (1m3).
Loose frit for insulating hollow bodies.
GAS OVEN HGR-TI-EKO-260 BRICKS 260 L 1320°C
Ref : HGRTIEKO260
Brick insulated gas oven front loading - HGRTI EKO 260 1320 °C
Reverse draft for oxidizing or reducing firing
Economical model of 400 liters in total or 260 liters useful (usable for firing)
TOOL SCULPTURE STAINLESS STEEL 18 CM GH2104
Double stainless steel tool of L. 18 cm
Ref : GH2104
Length tip 40 mm
Width of tip 10 mm
Thickness at most 2 mm
Forged stainless steel modeling double-end tool for clay
CARVING TOOL STAINLESS STEEL 18.5 CM GH2103
Stainless steel tool of L. 18.5 cm
Ref : GH2103
Length loop 14 mm
Loop diameter 7 mm
Forged stainless steel modeling double-end tool for clay
AUBERGINE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE412
Aubergine / Eggplant
Ref : GE412
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
TURQUOISE GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE407
Turquoise green
Ref : GE407
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
BORDEAUX TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE404
Bordeaux wine
Ref : GE404
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
BEIGE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE402
Beige
Ref : GE402
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
GLAZE GE313 BLUE ELECTRIC TRANSPARENT. BIG THICKNESS. WITH LEAD
Glaze Blue electric
Ref : GE313
Transparent glazes "big thickness" with lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
GLAZE GE312 BLUE SKY TRANSPARENT. BIG THICKNESS. WITH LEAD
Glaze Blue sky
Ref : GE312
Transparent glazes "big thickness" with lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
GLAZE GE309 BLUE AQUAMARINE TRANSPARENT. BIG THICKNESS. WITH LEAD
Aquamarine
Ref : GE309
Transparent glazes "big thickness" with lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
Transparent glaze - GE300
Transparent glaze "big thickness" with lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS206
Stainless steel carver's rasp hand stitched
The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.
For use by sculptors, cabinetmakers and model makers.
Total length 175 mm
Ref : FRISS206
DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS204
Stainless steel carver's rasp, hand stitched
The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.
For use by sculptors, cabinetmakers and model makers.
Total length 175 mm
Ref : FRISS204
DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS203
Stainless steel carver's rasp hand stitched
The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.
For use by sculptors, cabinet makers and model makers.
Total length 175 mm
Ref : FRISS203
GIANT STAINLESS STEEL MIRETTE SCULPTURE SEMI-CUTTING 300 MM FRI16
Semi-cutting tool with square stainless steel wire and double tips
Giant mirette for turning and carving on semi-dry earth (leather texture)
Total length 300 mm
Ref : FRI16
GIANT STAINLESS STEEL MIRETTE SCULPTURE SQUARE WIRE 310 MM FRI15
Stainless steel semi cutting tool with two tips
Giant square wire sights for turning and carving on semi-dry (leather texture) or soft earth
Total length 310 mm
Ref : FRI15
270 MM STAINLESS STEEL CUTTING SCULPTURE MIRETTE FRI14
Stainless steel cutting tool with two tips
Giant cutting tip for turning and carving on semi-dry earth (leather texture)
Total length 250 mm
Ref : FRI14
