Best sellers

BLUE COBALT PIGMENT  P45 / N

Ceramic pigment pur Cobalt blue P45 / N

P set colouring oxides lik Pur.

GREY OCHRE PIGMENT P42

Ceramic pigment Grey ochre P42

P set colouring oxides lik Pur.

CERAMIC OXIDE P329 RED CORAL

Red coral- P329

CERAMIC PIGMENT P324 PURPLE AUBERGINE

Aubergine purple P324

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze and 1 to 10% in a white glaze.

LIGHT BLUE PIGMENT  P250

Ceramic pigment Light blue P250

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

GREEN GREY PIGMENT P218

Green grey P218

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

CERAMIC PIGMENT P214 GREEN PERSIAN

Persian green P214

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

STAIN P137 / N PURPLE

Purple P137 / N

P set colouring oxides lik Pur.

BLUE OF FRANCE PIGMENT P04

Ceramic pigment Blue of France P04

Calcined black copper oxide

Molar formula

CuO

Molar mass: 80

Gold to appliance with brush

Ref : OR8

Firing temperature: 650-820°C

Transparent glaze - NS20M

Composed of Frit.

Lead-free shiny transparent enamel.

For enamelling ceramic pieces in white clay.

Firing temperature between 980-1020ºC.

Copper red N3035

Lustre glazes with lead

Advice :

Temperature of firing : 980-990°C

Mentions :

Presence of lead. Use only for decorative products

Pink natural Modelling clay firing Dark Pink

For initiation in clay. Adapted for modelling, stamping and throwing.

It dries in 3-4 days around with room temperature conditions.

CAUTION : realisations may crumble if you do not fire.

Firing temperature : 950-1050°C

It can not be glazed.

Mitten - GLOVE CERAMIQUE

Good resistance to abrasion

Withstand 800°C in radiation and 500°C in contact

L 450 mm -

SHORT CUTTING TOOL 120 MM N°5 SMALL ROUND

Simple ribbon tool stainless steel L. 120 mm N°5  - MIR77

SHORT CUTTING TOOL N°9 END TRIANGULAR

Ribbon tool N°9 - MIR60

SHORT CUTTING TOOL N°6 TRIANGULAR END OFF-CENTER

Ribbon tool N°6 - MIR58

SHORT CUTTING TOOL N°2 END ROUND MM

Ribbon tool N°2 -MIR56

Ribbon tool N°7 - MIR54

Ribbon tool N°4 - MIR51

Sculpting Tools

Double ribbon  tools L. 185 mm N°10 - MIR45

Grey smooth modeling clay - MGRISE5

Pink color after firing at 980°C (1796°F).

White smooth modeling clay - MBLANC1.5

PRESSURE REGULATOR PROPANE GAS MAX 3 KG FLOW 10KG/H

Ref : MANBGRP007

Sunny deep orange M7514

Cadmium glaze with lead
Temperature of firing 960-1050°C

'history of ochre through recipes' _ LOCREEX

from prehistory to the present day

Les cahiers de Terres et couleurs

Félicien Carli

40 pages

French

The little illustrated guide to today's recipes' _ LARGILE

for modern media

Les cahiers de Terres et couleurs

Clément Féron

40 pages

French

GLAZING DIPPER 350 ML HANDLE WOODEN 300 MM

Wood handle 300 mm

Ref : KL1M

Kit protection clothing for ceramic fiber or powder

Kit protection with :

Complet protection

Glove

Goggle

Mask class P3 (fiber and powder)

KIT 3 PLATES + 18 PILLARS + 3 PILLARS H 100 MM - PLUTON3S

Ref : KITENFPLU3S

Complet kiln shelves for Pluton 1S 1320°C

PIGMENT YELLOW ORANGE 6540 D

Orange Yellow

Cadmium pigment

Ref : JO

COMPLETE GASKET SET FOR PERFEKT4 ENAMELLING SPRAYGUN

Set of complete joint

LEMON YELLOW PIGMENT 6520 D

Ref : JC

Lemon Yellow

Cadmium pigment

Pigment obtained by a succession of chemical reactions.

Presented in powder form, in dry state.

6451 Royal yellow

Pigment obtained by a succession of chemical reaction. 

In powder at a dry state

LOOSE INSULATING FRIT

Ref : ISOL12

Sold by the litre, possibility on request in big bag (1m3).

Loose frit for insulating hollow bodies.

ILMENITE - FERROUS TITANIUM

TiO2.FeO

Pm 152

GAS OVEN HGR-TI-EKO-260 BRICKS 260 L 1320°C

Ref : HGRTIEKO260

Brick insulated gas oven front loading - HGRTI EKO 260 1320 °C

Reverse draft for oxidizing or reducing firing

Economical model of 400 liters in total or 260 liters useful (usable for firing)

Model HELIOS electric oven in stainless steel capacity 110 liters 1300 ° C maximum.

Electric kiln 1300°C HELIOS build in stainless steel Capacity 110 liters

Ref : HELIOS1300

 Grip for trimming

Ref : GRIPTOUR

TOOL SCULPTURE STAINLESS STEEL 18 CM GH2104

Double stainless steel tool of L. 18 cm

Ref : GH2104

Length tip 40 mm

Width of tip 10 mm

Thickness at most 2 mm

Forged stainless steel modeling double-end tool for clay

CARVING TOOL STAINLESS STEEL 18.5 CM GH2103

Stainless steel tool of L. 18.5 cm

Ref : GH2103

Length loop 14 mm

Loop diameter 7 mm

Forged stainless steel modeling double-end tool for clay

AUBERGINE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE412

Aubergine / Eggplant

Ref : GE412

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

TURQUOISE GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE407

Turquoise green

Ref : GE407

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BORDEAUX TRANSPARENT GLAZE BIG THICKNESS UNLEADED :  GE404

Bordeaux wine

Ref : GE404

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BEIGE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE402

Beige

Ref : GE402

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE313 BLUE ELECTRIC TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue electric 

Ref : GE313

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE312 BLUE SKY TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue sky

Ref : GE312

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE309 BLUE AQUAMARINE TRANSPARENT. BIG THICKNESS. WITH LEAD

Aquamarine

Ref : GE309

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Transparent glaze - GE300

Transparent glaze "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS206

Stainless steel carver's rasp hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinetmakers and model makers.

Total length 175 mm

Ref : FRISS206

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS204

Stainless steel carver's rasp, hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinetmakers and model makers.

Total length 175 mm

Ref : FRISS204

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS203

Stainless steel carver's rasp hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinet makers and model makers.

Total length 175 mm

Ref : FRISS203

GIANT STAINLESS STEEL MIRETTE SCULPTURE SEMI-CUTTING 300 MM FRI16

Semi-cutting tool with square stainless steel wire and double tips

Giant mirette for turning and carving on semi-dry earth (leather texture)

Total length 300 mm

Ref : FRI16

GIANT STAINLESS STEEL MIRETTE SCULPTURE SQUARE WIRE 310 MM FRI15

Stainless steel semi cutting tool with two tips

Giant square wire sights for turning and carving on semi-dry (leather texture) or soft earth

Total length 310 mm

Ref : FRI15

270 MM STAINLESS STEEL CUTTING SCULPTURE MIRETTE FRI14

Stainless steel cutting tool with two tips

Giant cutting tip for turning and carving on semi-dry earth (leather texture)

Total length 250 mm

Ref : FRI14

165 MM DOUBLE ELBOW STAINLESS STEEL TOOL - FR58

Model with claws

Ideal for sculpture and detail work.

MIRETTE DOUBLE STAINLESS STEEL CUTTING TOOL L 180 MM - FR383

Professional cutting tool

CERAMIC REFRACTORY FIBRER IN ROLL SOLUBLE 1260°C EP 50 MM

Manganese brown F4352

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Advice :

Température 950-1200°C

Formula: Sn-Ca-Si-Cr-Mn

Deep cobalt blue F4343

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century. The fondant is already included in the mix. Appliance with brush or in serigraphy

Firing temperature: 950-1250°C

Formula: Co-Si-Al

White partition F4313CD

This a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together excepted Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 940-1050°C

Leaded melting agent N°31 for leaded vitrifiable color.

GROUPE II with lead
Temperature of using : 750-800°C

HAND EXTRUDER STAINLESS STEEL WITH 6 PIECE DIE EX-115

Bio waterproofing clay for porous pieces - ZINSTONE

Ref : ETANBIO

Soft stainless steel palette half-moon 152 x 40 mm - EST306S

Hard stainless steel palette half-oval 90 x 45 mm - EST302R

Cobalt blue - ES919

Temperature of firing : 950-1050°C

Groupe I

Without lead

Purple transparent with lead glaze ES8848

Firing temperature : 960-1040°C

Cobalt blue - ES850

Temperature of firing : 950-1050°C

Groupe I

Without lead

PERIWINKLE BLUE - ES8060

Temperature of firing : 960-1040°C

Groupe I

Without lead

Intense blue sky - ES8057

Temperature of firing : 950-1050°C

Groupe I

Without lead

Shiny transparent glaze - ES805

YELLOW HAS EFFECTS ES278

Orange - ES274

Temperature of firing : 950-1050°C

Groupe III

With lead

Middle green- ES265

Temperature of firing : 950-1050°C

Groupe III

With lead

Blue - ES243

Temperature of firing : 950-1050°C

Groupe III

With lead

Honey transparent - ES1048

Temperature of firing : 950-1050°C

Groupe II

With lead

Silver glazed - ES1000

Temperature of firing : 950-1050°C

Groupe III

With lead

COATING PROTECTION FIBER AND BRICKS 2500°C MAX HC100HT

Ref : ENDUI

Packaged in a 0.5 liter jar

COLORED ENGOBE SUN YELLOW   EN56

COLORED ENGOBE PISTACHIO GREEN  EN39

LIQUID ENAMEL WITH EESP48 EFFECT VIOLET

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL WITH EESP37 EFFECT ORANGE

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

Glittery transparent - EESP18

GROUPE I 

Firing temperature: 980°C -1280°C

Leather sandy  - EESP07

GROUPE I

Firing temperature: 980°C

Glittery antracite EESP03

GROUPE I

Firing temperature: 980°C

Lead free parrot green cadmium enamel - EECS 09

Cadmium selenium effect.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.

Lead free orange cadmium enamel - EECS 02

Cadmium selenium effect.

Series of colored lead-free enamels of great intensity with a specific formulation.

They can be applied on any type of paste, white or red.

Suitable for decorating culinary pieces.

The application can be done by dipping, spraying or with a pear.

The recommended firing temperature is 980-1080°C.

It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.

High coefficient of expansion to be taken into account in order to avoid cracking.

These enamels require a thick coat.