Best sellers

TOOL SCULPTURE STAINLESS STEEL 18 CM GH2104

Double stainless steel tool of L. 18 cm

Ref : GH2104

Length tip 40 mm

Width of tip 10 mm

Thickness at most 2 mm

Forged stainless steel modeling double-end tool for clay

CARVING TOOL STAINLESS STEEL 18.5 CM GH2103

Stainless steel tool of L. 18.5 cm

Ref : GH2103

Length loop 14 mm

Loop diameter 7 mm

Forged stainless steel modeling double-end tool for clay

TURQUOISE GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE407

Turquoise green

Ref : GE407

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BORDEAUX TRANSPARENT GLAZE BIG THICKNESS UNLEADED :  GE404

Bordeaux wine

Ref : GE404

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BEIGE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE402

Beige

Ref : GE402

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE314 BLUE COBALT TRANSPARENT. BIG THICKNESS. WITH LEAD

Blue cobalt

Ref : GE314

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE313 BLUE ELECTRIC TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue electric 

Ref : GE313

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Transparent glaze - GE300

Transparent glaze "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS206

Stainless steel carver's rasp hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinetmakers and model makers.

Total length 175 mm

Ref : FRISS206

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS204

Stainless steel carver's rasp, hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinetmakers and model makers.

Total length 175 mm

Ref : FRISS204

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS203

Stainless steel carver's rasp hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinet makers and model makers.

Total length 175 mm

Ref : FRISS203

GIANT STAINLESS STEEL MIRETTE SCULPTURE SEMI-CUTTING 300 MM FRI16

Semi-cutting tool with square stainless steel wire and double tips

Giant mirette for turning and carving on semi-dry earth (leather texture)

Total length 300 mm

Ref : FRI16