Best sellers

PIGMENT N. CALCINED SIENNA 6211

6211 Siena Calcined

Ref : TSC

6211 Fired sienna

Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.

REFRACTORY BRAIDED STRIP 2 MM THICK, 50 MM WIDE PER ML

Flat ceramic strip Thickness 02mm Width 50mm - Le ml

Ref : TRESBAN2

Ceramic rope 1320°C Ep 2 mm Larg  50 mm

Ceramic tape

6270 Brown earth

Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.

Semi-rigid abrasive pad with diamond coating - TAMPONABP60

To sand enamel or clay splinter on your pieces.

Large grain (P 60) Green

w. 55 x L. 90 x H. 27 mm

Stainless steel plastic sieve Ø 16 / 100 µ - TAMISBLANC

Aluminium sieve Ø 110 mm mesh 80 µm - TAMIALU80

Refractory métal stilts  T° 1200°C D 100 mm

Iron sulfate

Ref : SULFFER

SANDE OF SILICE 0-0.03 MM "6029"

Ref : SIL

SET WIRE MODELING TOOLS STAINLESS STEEL 15 CM

Ref : SET5MIR

Tour Shimpo RK 55

Ref : RK55

Lead-free opaque white satin enamel - PR20 (PR20/N)

The firing temperature varies between 980-1100ºC.

Kiln refractory plates 1340 ° C max 305 x 13mm round batt

Plate 450x450x13mm Weight 5.7 kg
Fragile material, can not be sent by post.

Foam brush with wood handle widht 50 mm - PB50R6

ORANGE CERAMIC PIGMENT P317

Orange P317

ORANGE YELLOW PIGMENT P316

Orange yellow P316

P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.

COLOURING OXIDE IRON RED P311

Iron red P311

STAIN P189 RED

Red P189

Ceramic pigment

P set colouring oxides lik Pur.

DOUBLE CUTTING TOOL L 220 MM N°11

Double ribbon  tools L. 220 mm N°11 - MIR72

Simple ribbon  tools L. 220 mm N°12 - MIR47

INSULATING SEALANT CARTRIDGE 1400 ° C MAX

Pasty insulating sealant cartridge to fill the crack in your furnace 1400 ° C/2552°F  max

Deep red M7510

Cadmium glaze with lead
Temperature of firing 960-1020°C

BALL CLAY HYMOD EXCELCIOR

Ref : IMOD

GLAZE GE413 GREY TRANSPARENT. BIG THICKNESS. WITHOULEAD

Grey

Ref : GE413

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

AZAFATA BLUE TRANSPARENT BIG THICKNESS UNLEADED : GE411

Azafata blue

Ref : GE411

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

CELESTIAL BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED  GE410

Celestial blue 

Ref : GE410

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

STAINLESS STEEL TOOLS FRI125 DOUBLE BALL LENGTH 105 MM

Double ball stainless steel tool

Tool for details and earth work

Round tip diameter 8 mm and 11 mm

Total length 105 mm

Ref : FRI125

Soft stainless steel palette kidney 75 x 50 mm - EST310S

Soft stainless steel palette half-moon 190 x 35 mm - EST307S

Opaque matt glaze ES6020

Groupe I

Without lead

Matt transparent glaze - ES1600

Temperature of firing : 850-1050°C

Coeff dilat 25-300°C: 65

Groupe II

With lead

PINS PAIR FOR WHEEL HEAD

Ref : ERGOT

Liquid black engobe ready for use EGM60/004 underglaze

Firing temperature : 980-990°C°C

Without lead

Liquid lemon yellow engobe ready for use EGM56/003 underglaze

Firing temperature : 980-990°C°C

Without lead

EESP43 EFFECT LIQUID ENAMEL EESP43 EFFECT GREY

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL WITH EESP38 EFFECT RED

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C