Français
Deutsch
Italiano
Español
HAND EXTRUDER STAINLESS STEEL WITH 6 PIECE DIE EX-115
Bio waterproofing clay for porous pieces - ZINSTONE
Ref : ETANBIO
Soft stainless steel palette half-moon 152 x 40 mm - EST306S
Hard stainless steel palette half-oval 90 x 45 mm - EST302R
Cobalt blue - ES919
Temperature of firing : 950-1050°C
Groupe I
Without lead
Purple transparent with lead glaze ES8848
Firing temperature : 960-1040°C
Cobalt blue - ES850
Temperature of firing : 950-1050°C
Groupe I
Without lead
PERIWINKLE BLUE - ES8060
Temperature of firing : 960-1040°C
Groupe I
Without lead
Shiny transparent glaze - ES805
Middle green- ES265
Temperature of firing : 950-1050°C
Groupe III
With lead
Blue - ES243
Temperature of firing : 950-1050°C
Groupe III
With lead
Honey transparent - ES1048
Temperature of firing : 950-1050°C
Groupe II
With lead
Silver glazed - ES1000
Temperature of firing : 950-1050°C
Groupe III
With lead
COATING PROTECTION FIBER AND BRICKS 2500°C MAX HC100HT
Ref : ENDUI
Packaged in a 0.5 liter jar
LIQUID ENAMEL WITH EESP48 EFFECT VIOLET
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP37 EFFECT ORANGE
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
Glittery transparent - EESP18
GROUPE I
Firing temperature: 980°C -1280°C
Leather sandy - EESP07
GROUPE I
Firing temperature: 980°C
Glittery antracite EESP03
GROUPE I
Firing temperature: 980°C
Lead free parrot green cadmium enamel - EECS 09
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free orange cadmium enamel - EECS 02
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
PROTECTION SHIELD FOR RADIANT HEAT MAX. 1390°C
Protection shield for radiant heat up to1390°C - ECRAN
