Français
Blue celestial liquid glaze SOL03/105
Without lead
Firing temperature : 980-990°C
White mat liquid glaze SOL02/024
Without lead
Firing temperature : 980-990°C
TRANSPARENT MATE LIQUID GLAZE WITHOUTLEAD SOL01/009L
Transparent mate liquid glaze SOL01/009L
Transparent crackled glaze SOL01/004
Without lead
Firing temperature : 1000-1300°C
Coefficient of dilatation: 101
Ivory white enamel - SIGLO XV
Opaque glossy white enamel.
This is an enamel studied to imitate antique white enamels which have a slightly yellowish (dirty white) tone.
We recommend using the special color series for decorating SIGLO XIII-type pieces.
Can be used indifferently on white and red paste.
The recommended firing temperature varies between 950-1000°C.
Crystallized brown S3A
Lustres glazer with lead
Temperature for firing : 850-990°C
Presence of lead. Use only for decorative products
Wooden roller to spread the earth - RP-S
Length 25 cm
Axle on a bearing ø 50 mm
JEU DE 3 RESISTANCES 1300°C HELIOS 110 L
Réf : RESHELIOS
Electronic Potter wheel on feet PW-DCT LEG
Power 250 W en 220 V (1/3 CV)
Dimensions : L 530 x P 680 x H 510 mm .
Wheel head diameter 300 mm .
Collector in plastic in 2 parts which can be easily dismantled.
Silencious potter's wheel.
direction: Clockwise or Anti-clockwise.
Variable speed to 0 at 300 RPM.
Quiet: 55 dB.
Weight 35 kg .
Capacity : 15 kg max
Forged stainless steel modeling double-end tool for clay L. 17.8 cm - PTS2411
Bright white zircon enamel - PR 6303 F
Composed of Frit.
Bright opaque white enamel, lead free. Recommended for parts for food use.
For the enameling of ceramic pieces in red or white earth, especially those which must contain food.
Can be colored with natural oxides or calcined type P series. If the room must contain food, use lead-free dyes. The application can be done with a bath, brush, spray gun or screen printing.
Firing temperature between 1000-1020ºC where the enamel shows its best development.
Bright white zircon enamel - PR23
Composed of Frit.
It is an enamel specially designed for pottery and tiling.
Admits decoration well.
The firing temperature varies between 950-1000ºC.
KILN PLUTON 3S 76 L 1320° TOPLOADER
Stainless carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramic fiber
Kiln refractory plates 1340 ° C max 600x600x15 mm
Plate 600x600x15mm Weight 11.9 kg
Fragile material, can not be shipped by Post
SHELVE REFRACTORY FOR RAKU KILN ROUND DIAM 396X15 MM 1260°C
Kiln shelves temperature 1340 ° C max 300x300x13mm
Plate 300x300x13mm
Weight 2.3 kg
Fragile material, can not be sent by post.
Kiln refractory round plates 1340 ° C max Ø 560 x 17 mm (8kg)
Ref : PLAQ500
Fragile material, can not be sent by post.
Refractory pins in cordierite 1200°C maxi
Hole brass cutter Ø 20 mm L. 160 mm - PERF80
BEIGE PATINA PIGMENT
6223 Beige Patina
Ref : PABE
Pigment of mineral origin.
They are earth or rock very finely ground (ochres, earths, natural oxides).
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
BLUE PIGMENT P82
Blue P82
P set colouring oxides lik Pur.
ORANGE PIGMENT P532
orange P532
P set colouring oxides lik Pur.
RED BROWN PIGMENT P50
Red brown P50
P set colouring oxides lik Pur.
