Français
Deutsch
Italiano
Español
Mono lead silicate enamel - MONOPB
Composed of Frit.
Transparent, shiny and melting enamel.
With lead.
MIRETTE 17CM INOX COUPANTE CRS1
Réf : CRS1
Longueur : 170 mm
CUTTING TOOL L 220 MM N°9
Simple ribbon tools L. 220 mm N°9 - MIR78
Ribbon tool N°10 - MIR52
Sculpting Tools
Red cadmium enamel - M7506
Intense red, opaque and shiny enamel.
For the enameling of ceramic pieces in red or white clay.
You can enamel by dipping or with a gun.
Recommended firing temperature between 960-1000ºC.
LOT OF 5 CALES 50 x 50 x 20 MM 1340°C
Ref : LOTCALE
Set of 9 double stainless steel tools 140 mm
Ref : KIT9OUTILSINOX
CORAL TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE403
Coral
Ref : GE403
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
Matte transparent enamel - G 1005
Composed of Frit.
Transparent satin zinc and lead enamel.
Can be easily colored.
One must take into account the fact that zinc oxide can be bad to develop certain oxides dyes.
We recommend applying it for white paste and thin layer to avoid opalescences.
The firing temperature varies between 950-1000ºC.
STAINLESS STEEL TOOLS FRI375 DOUBLE POINT ARROW AND SPATULA IN THE SHAPE OF ROUNDED SPOON L 155 MM
Double stainless steel tool
Arrow point with cutting edges for details and cutting on the other side small spatula curved spoon-shaped pointed and rounded for fine work on the ground
Non-slip handle
Total length 155 mm
Ref : FRI375
