Français
Deutsch
Italiano
Español
Sculpture loop toll in stainless steel for clay L. 20 cm - WMT1008
Self-enameling smooth porcelain - PAROS
Parian body
Black ebony stoneware grog 25% 0-1 mm - GN01
Black Mid Fire with grog 0 to 1 mm
Very fine red - orange earhenware smooth - CATALANE
Red stoneware Brasil grog 40% 0-1 mm - BRASIL01
Groged
Black stoneware African Stone 40% grog 0-3 mm - AFRICS0-3
Very plastic clay, firing of a beautiful black in oxidation and black metallic in reduction.
Avoid too thin parts and program a very slowly firing in order to prevent bubble due to manganese.
COLOUR ALF OPAQUE CHROMIUM GREEN VP3317
Chromium green VP3317
Color for decoration of porcelain VP set.
Appliance with brush, serigraphy or aerography. To decorate on fired glaze : earthenware or porcelain.Appliance with thickness
Temperature : 700-800°C
GROUPE II
Transparent glaze - TSP 2
Composed of Frit.
Clear crystalline lead free.
For enamelling ceramic parts.
Admits the addition of dyes with excellent color development.
Has a firing interval between 1020-1080ºC.
PIGMENT N. CALCINED SIENNA 6211
6211 Siena Calcined
Ref : TSC
6211 Fired sienna
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
REFRACTORY BRAIDED STRIP 2 MM THICK, 50 MM WIDE PER ML
Flat ceramic strip Thickness 02mm Width 50mm - Le ml
Ref : TRESBAN2
Ceramic rope 1320°C Ep 2 mm Larg 50 mm
Ceramic tape
6270 Brown earth
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
Semi-rigid abrasive pad with diamond coating - TAMPONABP60
To sand enamel or clay splinter on your pieces.
Large grain (P 60) Green
w. 55 x L. 90 x H. 27 mm
Semi-rigid abrasive pad with diamond coating - TAMPONABP120
To sand enamel or clay splinter on your pieces.
Medium grain (P 120) Black
w. 55 x L. 90 x H. 27 mm
Stainless steel plastic sieve Ø 16 / 100 µ - TAMISBLANC
Refractory métal stilts T° 1200°C D 100 mm
SET WIRE MODELING TOOLS STAINLESS STEEL 15 CM
Ref : SET5MIR
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis. Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Temperature of firing : 800-900°C
Presence of lead. Do not use for alimentary products. Only for decorative products
Lead-free opaque white satin enamel - PR20 (PR20/N)
The firing temperature varies between 980-1100ºC.
Kiln refractory plates 1340 ° C max 305 x 13mm round batt
Plate 450x450x13mm Weight 5.7 kg
Fragile material, can not be sent by post.
Foam brush with wood handle widht 50 mm - PB50R6
ORANGE YELLOW PIGMENT P316
Orange yellow P316
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
DOUBLE CUTTING TOOL L 220 MM N°11
Double ribbon tools L. 220 mm N°11 - MIR72
Simple ribbon tools L. 220 mm N°12 - MIR47
INSULATING SEALANT CARTRIDGE 1400 ° C MAX
Pasty insulating sealant cartridge to fill the crack in your furnace 1400 ° C/2552°F max
Deep red M7510
Cadmium glaze with lead
Temperature of firing 960-1020°C
SCRAPER FOR DRY CLAY 40*60 MM KY104
GLAZING PIPE 250 ML
Atomizer / mouth sprayer with tank of 250 ml - KL2L
Ceramics pastel in the form of a stick without lead.
18 stick plain colours
GLAZE GE413 GREY TRANSPARENT. BIG THICKNESS. WITHOULEAD
Grey
Ref : GE413
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
AZAFATA BLUE TRANSPARENT BIG THICKNESS UNLEADED : GE411
Azafata blue
Ref : GE411
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
