Français
Deutsch
Italiano
Español
CELESTIAL BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED GE410
Celestial blue
Ref : GE410
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
STAINLESS STEEL TOOLS FRI125 DOUBLE BALL LENGTH 105 MM
Double ball stainless steel tool
Tool for details and earth work
Round tip diameter 8 mm and 11 mm
Total length 105 mm
Ref : FRI125
Soft stainless steel palette kidney 75 x 50 mm - EST310S
Opaque matt glaze ES6020
Groupe I
Without lead
Matt transparent glaze - ES1600
Temperature of firing : 850-1050°C
Coeff dilat 25-300°C: 65
Groupe II
With lead
Liquid black engobe ready for use EGM60/004 underglaze
Firing temperature : 980-990°C°C
Without lead
Liquid lemon yellow engobe ready for use EGM56/003 underglaze
Firing temperature : 980-990°C°C
Without lead
Undercoat EGM20
Temperature of firing : 940-1080°C
Free of lead
EESP43 EFFECT LIQUID ENAMEL EESP43 EFFECT GREY
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP38 EFFECT RED
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP36 EFFECT SPOT YELLOW
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
Speckled green EESP25
GROUPE I
Firing temperature: 980°C
LIQUID ENGOBE FOR STONEWARE AND PORCELAIN EASP06LL RED 1KG
Collection suitable for single-firing and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
ENGOBE GRES & PORCELAIN EASP03 SALMON
Salmon stoneware & porcelain slip - EASP03
Powder
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Light orange
Ref : E63041/1
Chocolate natural self hardening clay : "DURCI'DUR"
Ref : DDECH1.5
For children upper 3.
Do not stain hands.
No firing is necessary. It dries in 48h around with room temperature conditions.
Realisations are schock resistant.
Do not fire, do not glaze.
Transparent crackle enamel - CQ 03 (FR7)
Ceramic compound.
TRANSPARENT CRACKED
TRANSPARENT ENAMEL GLOSSY very alkaline and fondant, suitable for raku techniques or metallic reflections.
Specially recommended as ceramic covered.
With the addition of metallic oxides, characteristic colours of alkaline enamels are obtained, as in the case of the CuO for turquoise blue.
The recommended firing temperature ranges from 800-950°C.
COLOUR FREE LEAD CD19 PINK CLEAR
Clear rose- CD19
Without lead
Firing temperature: 980-1280°C
Formula: Cd-S-Se-Zr-Si
COLOUR FREE LEAD CD15 GREEN MEDIUM
Middle green- CD15
Without lead
Firing temperature: 980-1280°C
Formula: Zr-Pr-V-Si
COLOUR LEAD FREE CD06 RED CARMINE
Red crimson- CD06
Without lead
Firing temperature: 980-1280°C
Formula: Si-Sn-Cr-Ca
Crimson / CARMINE CC10
Engobes range. Possibility to mix them together. Usable on raw pieces or bisquewares, for soaking or decoration.
Temperature of firing : 940-1020°C
Free of lead
STRONTIUM CARBONATE
Ref : CARSTR
Molar formula
CO3Sr2
Molar mass: 148
BARIUM CARBONATE
CARBAR
Molar formula:
CO2Ba
Molar mass: 197
Lustre light blue
Firing temperature : 750-820°C
Ref : BLLU700
Bisqueware pressed tile red earthenware - BISCFR150X150X5
ENGOBE WHITE ATOMISED AUBAGNE
Fragmented white engobe AUBAGNE
SCULPTING TOOLS 12 CM ENV. SET OF 10 PIECES
Ribbon tool - Set of 10 pieces
Ref : 904
Sculpting Tools
