Best sellers

The little illustrated guide to ceramics _ LCAHIERS

engobes

Les cahiers de Terres et couleurs

Marie-Pierre Lamy

40 pages

French

KIT DIGITAL THERMOMETER PROBE TYPE S 1400°C + 3 M CABLE

Ref : KITTHERS

Complet kit including, thermometer, probe type S (1400 ° C) 250mm + 3 meters compensating cable.

This kit comes fully assembled.

Complet glaze kit with Compressor + Spraygun + Air hose 5 meters + connection

Spraygun in 1.8 mm

6230 Havana Yellow

Pigment of mineral origin.

These are very finely ground earths or rocks (ochres, earths, natural oxides).

Highly resistant to light (unalterable to ultraviolet rays), they are non-toxic, have a very high covering power and are miscible with each other.

OIL FOR SCREW VACUUM PUMP / THE LITER

OIL for screw vacuum pump (grey pump) : the liter

Connection claw for heating element of 30 A max

CONNECTION CLAMP FOR RESISTOR WIRE OF 16A MAX

Ref : GRIFFE16

BROWN TRANSPARENT GLAZE BIG THICKNESS UNLEADED :  GE405

Brown

Ref : GE405

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

YELLOW TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE401

Yellow 

Ref : GE401

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

TRANSPARENT GLAZE BIG THICKNESS UNLEAD : GE400

Transparent

Ref : GE400

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE310 GREEN GRASS TRANSPARENT. BIG THICHNESS. WITH LEAD

Green grass

Ref : GE310

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE308 BLEU TURQUOISE BLUE TRANSPARENT. BIG THICKNESS. WITH LEAD

Turquoise blue

Ref : GE308

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Transparent glaze grey -GE306

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperat

KEVLAR® SOFT GLOVES DOUBLE WOOL

Kevlar® soft gloves double wool

Ref : GANTKDL

Simple Raku gloves treated leather - GANRAKU

Use with long raku pliers.

Good grip.

Wool lined and Kevlar® stitching.

L. 350 mm.

Insulating brick for cutlery forge

Refractory brick

Ref : FTCOUT1

DOUBLE INOX TOOL 160 MM - FR453

2 Tips, 1 arrow-shaped at the 2 sharp edge and 1 spoon-shaped at the cutting edge.

Ideal for sculpture and detail work.

2 P3 HALF MASK REPLACEMENT FILTERS

2 replacement P3 filters for half mask

Ref : FILTREP3

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Firing température 950-1200°C

Formula: Cu-Zr-Si-Pr

Soft stainless steel palette drop water 69 x 36 mm - EST311S

Hard stainless steel palette half-moon 152 x 40 mm - EST306R

Soft stainless steel palette half-oval 90 x 45 mm - EST302S

PERIWINKLE BLUE - ES8060

Temperature of firing : 960-1040°C

Groupe I

Without lead

Shiny white - ES798

Temperature of firing : 950-1050°C

Coeff dilat 25-300°C: 62

Groupe II

With lead

Matt white - ES600

Temperature of firing : 950-1050°C

Coeff Dilat 25-300°C: 72

Groupe I

Without lead

Clear green- ES263

Temperature of firing : 950-1050°C

Groupe III

With lead

Red cadmium - ES253

Temperature of firing : 950-1050°C

Groupe III

With lead

Aluminium funnel Ø 120 mm - ENTO36

COLORED ENGOBE TURQUOISE BLUE   EN46

LIQUID RED ENGOBE UNLEADED EGM57/003

Liquid red engobe ready for use EGM57/003

TURQUOISE BLUE LIQUID ENGOBE UNLEADED EGM53/004

Liquid blue engobe ready for use EGM53/004

Firing temperature : 980-990°C°C

Without lead

LIQUID ENAMEL WITH EESP49 EFFECT ORANGE

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL WITH EESP47 EFFECT GREEN

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL EESP46 EFFECT BLACK

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C

LIQUID ENAMEL WITH EESP44LL EFFECT WITH GOLDEN HIGHLIGHTS 1KG

Opaque lead-free effect enamels

Group I: lead-free

Firing range 980 °C