Français
Lead free cardinal red cadmium enamel - EECS 03
Cadmium selenium effect, bright red.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Light grey stoneware & porcelain engobe - EASP15
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
LIQUID SLIP STONEWARE & PORCELAIN EASP04LL MAKE-UP 1KG
Stoneware & porcelain make-up slip - EASP04LL
Liquid slip in 1 kg jar
Collection suitable for single-firing (with the addition of 5% Monocol V for the powder engobe) and double-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder form.
At earthenware temperature, colors will be more pastel than presented.
Advice :
Firing range 980 - 1280°C
Application by brush, dip or spray.
LIQUID SLIP STONEWAR & PORCELAIN EASP01L WHITE 250GR
White stoneware & porcelain engobe - EASP01L
Liquid in 250gr
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
GLAZE WITH EFFECT E21017/78 LUSTER BROWN PURPLE AVENTURINE WITHOUT LEAD
Lustre crimson "Aventurine"
Ref : E21017/78
Lustre orange crimson "Aventurine"- E21017/50
Opaque glaze with effects
Without lead
Temperaure of firing : 980°C
DOLAFLUX B is suitable for the deflocculation of most silicate ceramic raw materials
Melting N°20 Melting without lead for série P
GROUPE I
Firing temperature: 900-950°C
DURCI'DUR® Anise green Classic Range - DDV1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
D99 SUNSHINE YELLOW PIGMENT DYE
Sunshine yellow
Ref : D99
COLORS TO BE PAINTED D SERIES Our D series from Solargil is a range of very fine coloring oxides with flux incorporated in the formula.
Miscible with each other to vary the shades, they can be used under glaze or on enamel, and can also be used to color enamels: between 4 and 9% in a transparent base and between 6 and 15% in a white base.
Tips:
Firing temperature 950-1250°C
Formula: Zr-Si-Co-Ni
Green vanadium D95
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Si-Pr-V
White opaque D60
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Ce-Si
Copper green D29
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing temperature: 950-1200°C
Formula: Cu-Zn
Turquoise blue D27
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing : Temperature: 950- 1250°C
Formula: Zr-Si-V
Blue sky D218
Colouring oxide range with unlead fondant incorporated in the formula.
Possibility to mix those colours and to use them on or under the glaze.
Firing température 980-1020°C
Formula: Zr-V
Blue green D203
Colouring oxide range with unlead fondant incorporated in the formula.
Possibility to mix those colours and to use them on or under the glaze.
Firing température 980-1020°C
Formule: Cr-Co
Chromium green D105
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température 950-1050°C
Formula: Cr-Zr-Si-Pr
Cement grey D100
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température 950-1250°C
Formula: Zr-Si-Co-Ni
Pink D07
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades. Usable under glaze or on it.
Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.
Firing température 950-1200°C
Formula: Sn-Cr
COLOR D02 BROWN
Brown D02
Ref : D02
Colors to paint D Set.
These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.
Usable under glaze or on it.
Can be used to color the glazes :between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis
Firing température 950-1250°C
Formula: Zr-Si-Al
Red - CS 210
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Victoria green - CS 209
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Green - CS 208
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Yellow - CS 207
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Turquoise blue - CS 200
This collection of colors necessary for the "Cuerda Seca" technique includes all the colors to develop a complete palette.
Colors can mix well, except Red CS-210 and Orange CS-211, which must be pure.
To obtain "Pastel" colors, it is necessary to add an opaque white enamel which decreases the intensity of the color and makes it softer.
Alkaline crackle transparent enamel - CQ 01 (FR6)
Composed of Fritte.
Cracked and shiny transparent email.
Its application is recommended on white or engobées pasta to appreciate the aged effect of cracking.
Allows decoration under enamel with burnt dye oxides.
Once the piece is cooked, it is recommended to use Judean Bitumen to bring out the cracked effect.
Other enamels can be used as aditives to increase the dilation coefficient.
The firing temperature varies between 940-980ºC.
Set of 2 clips for the collectorfor potter's wheel PWD, PWCT, TE9, etc...
Ref : CLIPPW
IMPALPABLE PORCELAIN GROG
SOLARGIL® porcelain chamotte
Ref : CHAMP
SET WASHER Ø 75 MM + PIN L 70 MM FOR STAINLESS STEEL ROD M6
Used with an M6 threaded stud DRT type.
