Best sellers

MIRETTE 17CM INOX COUPANTE CRS1

Réf : CRS1

Longueur : 170 mm

CUTTING TOOL L 220 MM N°9

Simple ribbon  tools L. 220 mm N°9 - MIR78

Ribbon tool N°10 - MIR52

Sculpting Tools

White smooth modeling clay - MBLANC10

Red cadmium enamel - M7506

Intense red, opaque and shiny enamel.

For the enameling of ceramic pieces in red or white clay.

You can enamel by dipping or with a gun.

Recommended firing temperature between 960-1000ºC.

Glossy white enamel - M 5148

Composed of Frit.

Zircon Opaque White Enamel, lead free, which makes it suitable for all kinds of edible pottery.

Admits decoration very well. We recommend the use of lead-free pigments when the room to be decorated must contain food.

The firing temperature varies between 960-980ºC.

LOT OF 5 CALES 50 x 50 x 20 MM 1340°C

Ref : LOTCALE

blade 40 x 80 mm - KY113A

Shred

Set of 9 double stainless steel tools 140 mm

Ref : KIT9OUTILSINOX

BALL CLAY HYMOD EXCELCIOR

Ref : IMOD

CORAL TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE403

Coral 

Ref : GE403

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Matte transparent enamel - G 1005

Composed of Frit.

Transparent satin zinc and lead enamel.

Can be easily colored.

One must take into account the fact that zinc oxide can be bad to develop certain oxides dyes.

We recommend applying it for white paste and thin layer to avoid opalescences.

The firing temperature varies between 950-1000ºC.

STAINLESS STEEL TOOLS FRI375 DOUBLE POINT ARROW AND SPATULA IN THE SHAPE OF ROUNDED SPOON L 155 MM

Double stainless steel tool

Arrow point with cutting edges for details and cutting on the other side small spatula curved spoon-shaped pointed and rounded for fine work on the ground

Non-slip handle

Total length 155 mm

Ref : FRI375

STAINLESS STEEL TOOLS FRI367 DOUBLE SCALPEL AND SPATULA L 160 MM

Double stainless steel tool

Cutting scalpel for details and cutting and small curved spatula for fine soil work

Anti-slip handle

Total length 160 mm

Ref : FRI367

Black partition F4312CD

This a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe. Colors are used deluted with water to obtain a thick mix. CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together excepted Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Fiiring temperature : 940-1050°C

Soft stainless steel palette cocked 153 x 81 mm - EST313S

Soft stainless steel palette half rectangular 120 x 60 mm - EST309S

Soft stainless steel palette half-moon 120 x 50 mm - EST305S

Hard stainless steel palette half-oval 100 x 51 mm - EST303R

Shiny transparent glaze ES9008

Glazes for stoneware and porcelains
Temperature of firing : 1260-1300°C

Groupe I

Without lead

Cobalt blue - ES850

Temperature of firing : 950-1050°C

Groupe I

Without lead

Dark blue - ES244

Temperature of firing : 950-1050°C

Groupe III

With lead

COLORED ENGOBE COBALT BLUE  EN45

Liquid lilac engobe ready for use EGM62/001 underglaze

Firing temperature : 980-990°C°C

Without lead