Français
Deutsch
Italiano
Español
GREY BEIGE LIQUID GLAZE UNLEADED SOL09/104 300GR
Grey beige glaze SOL09/104
Without lead GI
Firing temperature : 980-990°C
300gr
YELLOW MUSTARD LIQUID GLAZE UNLEADED SOL09/101 300GR
Liquid shinny mustard yellow glaze SOL09/101
Without lead GI
Firing temperature : 980-990°C
300gr
INTENS RED LIQUID GLAZE UNLEADED SOL07/101LL 1KG
Intense red liquid glaze SOL07/101LL
Without lead GI
Firing temperature : 980-990°C
1kg
Periwinkle blue liquid glaze SOL03/106
Without lead
Firing temperature : 980-990°C
Shinny white liquid glaze SOL02/019
Without lead
Firing temperature : 980-990°C
Transparent crackled glaze SOL01/004L
Without lead
Firing temperature : 980-990°C
6440 Vermeil red
Pigment obtained by a succession of chemical reaction.
In powder at a dry state
Wooden roller to spread the earth - RP-M
Length 25 cm
Axle on a bearing ø 60 mm
Tour Shimpo RK3D
Tour de potier professionnel.
Silencieux (18dB), doux, souple
Encombrement : H. 485 X L. 595 X l. 480 mm
Capacité de tournage : 18 kg de terre Ø girelle 300mm
Tension : 220V Monophasé. Puissance 400 W
Variateur de vitesse électronique et silencieux, par pédale
Vitesse de rotation : de 0 à 250 tr/minute
Poids : 45 kg
FULL SET ELEMENTS KILN 1320°C PLUTON2S 60 L
Ref : RESPLU2S
SET OF 3 RESISTANCES BENJAMIN5G 110L 1300°C
Set of 3 spare resistances for 110 liters oven 1300°C BENJAMIN5G
Ref : RESISBENJ5
Set of 3 alternative heating element for kiln of 110 litres 1300°C BENJAMIN 5G
Please, always indicate the serie's number of your kiln
Set of 3 alternative heating elements for kiln of 75 liters 1300°C BENJAMIN 4G
Please, always indicated the serie's number of your kiln.
JEU DE 3 RESISTANCES 1300°C HELIOS 110 L
Réf : RESHELIOS
Base R1 - RAKU1
Glaze for Raku
Temperature of firing : 800-900°C
Groupe I
Without lead
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis. Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Temperature of firing : 800-900°C
Groupe III -Presence of lead.
Raku glazes especially elaborated for Raku technic.
Made up of 5 basis.
Usable in bath glaze, with spray gun or with brush.
Also proposed 3 sinters of basis.
The medium has to be refractory.
Advice :
Temperature of firing : 800-900°C
Coefficient of expansion: 104
Mentions :
Presence of lead. Do not use for alimentary products. Only for decorative products
TABLE TOP WHEELS
Electronic Potters wheel PW-DCT with foot pedal.
Forged steel modelling tool stainless steel for clay L. 17.8 cm
Ref : PTMP020
CERAMIC SCULPTURE TOOL IN STAINLESS STEEL
Extruding barel for EX-115 model.
6 Models.
Square tube EXT 37 mm INT 25 mm - EXT 63 mm INT 50 mm.
Octogon tube EXT 32 mm INT 22 mm - EXT 53 mm INT 44 mm.
Round tube EXT 37 mm INT 25 mm - EXT 62 mm INT 50 mm.
Transparent lead-free powder enamel - PR99
Composed of Fritte.
For enamelling of white earthenware.
We can decorate under and on enamel.
Obtaining coloured enamels by adding dyes from the "P" series.
Firing temperature between 1000 and 1100ºC.
Transparent glaze - PR 47
Composed of Frit.
Shiny transparent enamel with a high amount of calcium.
Recommended as a base for producing colored enamels with coloring oxides compounds based on calcium, such as for example the base of (Cr, Sn, Ca).
Rutile base when looking for a lead enamel with a high melting viscosity which must be used at a temperature above 1000º C.
The firing temperature varies between 980-1050ºC.
Glossy white enamel - PR 125
Opaque white enamel.
For the enameling of ceramic pieces in white or red earth.
It can be applied both by dipping and spraying.
The recommended firing temperature is between 980-1000ºC.
Red engobe pear small model 40 ml - POIREP
Attention/ Delivered without cannula
KILN PLUTON 4S 147 LITERS SPECIAL SCULPTOR1320°C TOP LOADER
Stainless carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramic fiber
Pluton 1S pottery kiln top-loading capacity 45 liters to 1320 ° C
Stainless steel carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramique fiber
KILN PLUTON 0S 23 L 1320° TOP-LOADING
Stainless steel carcass.
Interior refractory brick insulation 70 mm + 20 mm of ceramique fiber
Kiln shelves temperature 1340 ° C max 500x500x20mm
Plate 500x500x20mm Weight 9.9 kg
Fragile material, can not be sent by post.
Extruded kiln shelves (hollow plate) 1350 ° C 1000x600x38mm
Weight 25.8 kg plate 1000x570x38mm
Fragile material, can not be sent by post.
CUT KNIFE HANDLE WOOD HIGH QUALITY PKP08
Steel potter knife curved with wooden handle- PKP08
Digital calliper rule for the reading of disc BPCD
Phoenix recyclable self-hardening natural paste - PHOENIX1
Made with natural clay and flax fiber.
Hardens in 24 hours approx. depending on the thickness of the realization.
Do not fire.
"PERFEKT- 4" spray gun gravity version
HOLE BRASS CUTTER DIAMETER 6 MM PERF82
Hole brass cutter Ø 6 mm L. 160 mm - PERF82
HOLE BRASS CUTTER DIAM 12 MM CUPPER PERF81
Hole brass cutter Ø 12 mm L. 160 mm
Ref : PERF81
