Best sellers

M6889 BLUE GLAZE

Raku glazes especially elaborated for Raku technic.

Made up of 5 basis. Usable in bath glaze, with spray gun or with brush.

Also proposed 3 sinters of basis.

The medium has to be refractory.

Advice :

Firing temperature : 960-1020°C

Mentions :

Presence of lead. Do not use for alimentary products. Only for decorative products

'To bake' _ LVCUIRE

From clay to ceramics, Firing

What transformations? What firing systems?

Some kiln plans for the amateur

Alain Valtat

142 pages

French

'history of ochre through recipes' _ LOCREEX

from prehistory to the present day

Les cahiers de Terres et couleurs

Félicien Carli

40 pages

French

The little illustrated guide to today's recipes' _ LARGILE

for modern media

Les cahiers de Terres et couleurs

Clément Féron

40 pages

French

GLAZING DIPPER 350 ML HANDLE WOODEN 300 MM

Wood handle 300 mm

Ref : KL1M

Kit protection clothing for ceramic fiber or powder

Kit protection with :

Complet protection

Glove

Goggle

Mask class P3 (fiber and powder)

KIT 3 PLATES + 18 PILLARS + 3 PILLARS H 100 MM - PLUTON3S

Ref : KITENFPLU3S

Complet kiln shelves for Pluton 1S 1320°C

PIGMENT YELLOW ORANGE 6540 D

Orange Yellow

Cadmium pigment

Ref : JO

COMPLETE GASKET SET FOR PERFEKT4 ENAMELLING SPRAYGUN

Set of complete joint

LEMON YELLOW PIGMENT 6520 D

Ref : JC

Lemon Yellow

Cadmium pigment

Pigment obtained by a succession of chemical reactions.

Presented in powder form, in dry state.

6451 Royal yellow

Pigment obtained by a succession of chemical reaction. 

In powder at a dry state

LOOSE INSULATING FRIT

Ref : ISOL12

Sold by the litre, possibility on request in big bag (1m3).

Loose frit for insulating hollow bodies.

GAS OVEN HGR-TI-EKO-260 BRICKS 260 L 1320°C

Ref : HGRTIEKO260

Brick insulated gas oven front loading - HGRTI EKO 260 1320 °C

Reverse draft for oxidizing or reducing firing

Economical model of 400 liters in total or 260 liters useful (usable for firing)

Model HELIOS electric oven in stainless steel capacity 110 liters 1300 ° C maximum.

Electric kiln 1300°C HELIOS build in stainless steel Capacity 110 liters

Ref : HELIOS1300

 Grip for trimming

Ref : GRIPTOUR

TOOL SCULPTURE STAINLESS STEEL 18 CM GH2104

Double stainless steel tool of L. 18 cm

Ref : GH2104

Length tip 40 mm

Width of tip 10 mm

Thickness at most 2 mm

Forged stainless steel modeling double-end tool for clay

CARVING TOOL STAINLESS STEEL 18.5 CM GH2103

Stainless steel tool of L. 18.5 cm

Ref : GH2103

Length loop 14 mm

Loop diameter 7 mm

Forged stainless steel modeling double-end tool for clay

AUBERGINE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE412

Aubergine / Eggplant

Ref : GE412

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

TURQUOISE GREEN TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE407

Turquoise green

Ref : GE407

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BORDEAUX TRANSPARENT GLAZE BIG THICKNESS UNLEADED :  GE404

Bordeaux wine

Ref : GE404

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

BEIGE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE402

Beige

Ref : GE402

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE312 BLUE SKY TRANSPARENT. BIG THICKNESS. WITH LEAD

Glaze Blue sky

Ref : GE312

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE309 BLUE AQUAMARINE TRANSPARENT. BIG THICKNESS. WITH LEAD

Aquamarine

Ref : GE309

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

Transparent glaze - GE300

Transparent glaze "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS206

Stainless steel carver's rasp hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinetmakers and model makers.

Total length 175 mm

Ref : FRISS206

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS204

Stainless steel carver's rasp, hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinetmakers and model makers.

Total length 175 mm

Ref : FRISS204

DOUBLE STAINLESS STEEL RIFFLER 175 MM FRISS203

Stainless steel carver's rasp hand stitched

The riffler is a special rasp with two heads, whose shapes are designed to reach hard-to-reach corners.

For use by sculptors, cabinet makers and model makers.

Total length 175 mm

Ref : FRISS203

GIANT STAINLESS STEEL MIRETTE SCULPTURE SEMI-CUTTING 300 MM FRI16

Semi-cutting tool with square stainless steel wire and double tips

Giant mirette for turning and carving on semi-dry earth (leather texture)

Total length 300 mm

Ref : FRI16

GIANT STAINLESS STEEL MIRETTE SCULPTURE SQUARE WIRE 310 MM FRI15

Stainless steel semi cutting tool with two tips

Giant square wire sights for turning and carving on semi-dry (leather texture) or soft earth

Total length 310 mm

Ref : FRI15

270 MM STAINLESS STEEL CUTTING SCULPTURE MIRETTE FRI14

Stainless steel cutting tool with two tips

Giant cutting tip for turning and carving on semi-dry earth (leather texture)

Total length 250 mm

Ref : FRI14

165 MM DOUBLE ELBOW STAINLESS STEEL TOOL - FR58

Model with claws

Ideal for sculpture and detail work.

MIRETTE DOUBLE STAINLESS STEEL CUTTING TOOL L 180 MM - FR383

Professional cutting tool

CERAMIC REFRACTORY FIBRER IN ROLL SOLUBLE 1260°C EP 50 MM

Manganese brown F4352

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century.

The fondant is already included in the mix.

Appliance with brush or in serigraphy

Advice :

Température 950-1200°C

Formula: Sn-Ca-Si-Cr-Mn

Deep cobalt blue F4343

SIGLO XVIII colouring.
Especially studied for typical decoration of XVIIIth century. The fondant is already included in the mix. Appliance with brush or in serigraphy

Firing temperature: 950-1250°C

Formula: Co-Si-Al