Best sellers

Gold to appliance with brush

Ref : OR12

Groupe I

Firing temperature: 650-750°C

Gold to appliance with brush

Ref : OR10

Groupe I

Firing temperature: 650-750°C

PIGMENT OXYDE DE COBALT BLEU 6410D

6410 Cobalt D blue

Pigment obtained by a succession of chemical reaction. 

In powder at a dry state

Transparent glaze - NS20M

Composed of Frit.

Lead-free shiny transparent enamel.

For enamelling ceramic pieces in white clay.

Firing temperature between 980-1020ºC.

Pink natural Modelling clay firing Dark Pink

For initiation in clay. Adapted for modelling, stamping and throwing.

It dries in 3-4 days around with room temperature conditions.

CAUTION : realisations may crumble if you do not fire.

Firing temperature : 950-1050°C

It can not be glazed.

MONOCOLLE III VINYL RESIN LIQUID GLUE

Ref : MONOIII

Liquid vinyl resin

SHORT GUTTING TOOL 120 MM N°2

Simple ribbon tool stainless steel L. 120 mm N°2 -MIR74

DOUBLE CUTTING TOOLS L 170 MM N°7

Double ribbon  tools L. 170 mm N°7 - MIR44

Wick for oil lamp - MECH

Sold by the meter.

White smooth modeling clay - MBLANC5

Foldable disposable 3M mask class P3 (ffp3) - MASQUEU

Ultra light, very enveloping.

With exhalation valve filtering against dust and fibrogenic particles.

DISPOSABLE FOLDABLE MASK UNIT CLASS P3

The little illustrated guide to ceramics _ LCAHIERS

engobes

Les cahiers de Terres et couleurs

Marie-Pierre Lamy

40 pages

French

KIT DIGITAL THERMOMETER PROBE TYPE S 1400°C + 3 M CABLE

Ref : KITTHERS

Complet kit including, thermometer, probe type S (1400 ° C) 250mm + 3 meters compensating cable.

This kit comes fully assembled.

Complet glaze kit with Compressor + Spraygun + Air hose 5 meters + connection

Spraygun in 1.8 mm

6230 Havana Yellow

Pigment of mineral origin.

These are very finely ground earths or rocks (ochres, earths, natural oxides).

Highly resistant to light (unalterable to ultraviolet rays), they are non-toxic, have a very high covering power and are miscible with each other.

OIL FOR SCREW VACUUM PUMP / THE LITER

OIL for screw vacuum pump (grey pump) : the liter

Connection claw for heating element of 30 A max

CONNECTION CLAMP FOR RESISTOR WIRE OF 16A MAX

Ref : GRIFFE16

BROWN TRANSPARENT GLAZE BIG THICKNESS UNLEADED :  GE405

Brown

Ref : GE405

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

YELLOW TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE401

Yellow 

Ref : GE401

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

TRANSPARENT GLAZE BIG THICKNESS UNLEAD : GE400

Transparent

Ref : GE400

Transparent glaze "big thickness" without lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE310 GREEN GRASS TRANSPARENT. BIG THICHNESS. WITH LEAD

Green grass

Ref : GE310

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C

GLAZE GE308 BLEU TURQUOISE BLUE TRANSPARENT. BIG THICKNESS. WITH LEAD

Turquoise blue

Ref : GE308

Transparent glazes "big thickness" with lead.

For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.

For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C

Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C

Advice :

Firing temperature 950°C - 1280°C