Français
Deutsch
Italiano
Español
UNDERGLAZE LIQUID ENSP24L RED INTENSE 250GR
Red intense ENSP24L ENGOBE
GI without lead
250GR
Transparent alkaline - PR02/M-2
Lead-free shiny transparent enamel.
For enamelling sandstone clays.
Optimal firing temperature 1120-1180°C.
POWDER GLAZE ETSP27 GREEN SHINY WITHOUT LEAD
Light Green ETSP27
GROUPE I
Firing temperature: 980-1050°C
GLAZE POWDER ETSP09 / N PINK SHINY WITHOUT LEAD
PINK - ETSP09
GROUP I without lead
Firing temperature: 980°C-1050°C
Blue cobalt ETSP02
GROUPE I
Firing temperature: 980°C - 1050°C
POWDER GLAZE EOSP26 BLACK OPAQUE WITHOUT LEAD
Black EOSP26
GROUPE I without lead
Firing temperature: 980°C
LIQUID GLAZE EOSP14 RED OPAQUE WITHOUT LEAD
Red - EOSP14
GROUPE I freelead
Firing temperature: 980°C
POWDER GLAZE EOSP0 EXTRA WHITE OPAQUE WITHOUTLEAD
White- EOSP0
GROUPE I without lead
Firing temperature: 980°C
UNDERGLAZE LIQUID ENSP06 GREEN VICTORIA
"Victoria" green ENSP06 liquid
UNDERGLAZE POWDER ENSP02 YELLOW
Yellow ENSP02
Without lead Groupe 1
Firing temperature: 980°C-1050°C
ENGOBE POWDER ENSP01 COLOR BASE
COLOR BASE ENSP01
MINI DIGITAL LABORATORY SCALE PORTFOLIO 100 G / 0.0.1 G
Mini compact scale - YA102
Bright purple XP3055/T
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Coefficient of expansion: 52
Bright parma XP3055
Free of lead
Temperature of firing : 980-1020°C
Coefficient of expansion: 55
Bright pistachio green XP3054/T
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Coefficient of expansion: 52
Bright orange XP3051/T
Free of lead
GROUPE I
Temperature of firing : 930-1050°C
Coefficient of expansion: 55
Bright orange XP3051
Free of lead
Temperature of firing : 980-1020°C
Coefficient of expansion: 55
Glaze Copper green XP3048
Groupe I
Firing temparature: 960-1050°C
Sculpture loop toll in stainless for clay L. 18,5 cm - WMT1006
Double inox trimming tool round cut L. 13 cm
Ref : WMT1001
Smooth culinary white earthenware - FBAF
COULOUR ALF OPAQUE YELLOW VP3115
Yellow VP3115
Color for decoration of porcelain VP set.
Appliance with brush, serigraphy or aerography.
To decorate on fired glaze : earthenware or porcelain.Appliance with thickness
Temperature : 700-800°C
GROUPE II
Stem turning tool stainless square end - TT4519
155 mm
Turning tool stainless steel round tip - TT4513
155 MM
Trimming tool stainless steel triangle point arc - TT4507
155 MM
Turning Tool
6210 Natural sienna
Natural pigments have a lot of advantages: inalterability to ultraviolet rays, high covering power and can be mixed between them anf non toxics.
Steel banding wheel double sided - TOURDB22
Ø 220 et 150 mm
H. 60 mm
DIGITAL BATTERY THERMOMETER FOR 1250°C K TYPE PROBE
Ref : THERNUMK
TFS PLATE HOLDERS - SOLID FL 360*67 1300°C
Ref : SUPASSTFS360
Effective width approximately 360mm H 67mm. T ° max 1300 ° C
PLATE REFRACTORY SUPPORTS TFS-FL FULL 260*45 1300°C
Effective width approximately 260mm H 45mm. T ° max 1300 ° C
Ref : SUPASSTFS260
SAFETY PROBE FOR R440 AND BGAT GAS BURNER
Safety probe for BG/AT burner
Ref : SONSECUBRU
Probe safety gas burner
Aquamarine liquid glaze SOL05/111
Without lead
Firing temperature : 980-990°C
Green lime liquid glaze SOL05/103
Without lead
Firing temperature : 980-990°C
Ultramarine blue liquid glaze SOL03/103
Without lead
Firing temperature : 980-990°C
WOOD BAT for potters wheels PWDC and TE9 WEELY
For wheel head equipped with device for quick change of MDF wooden batts
Ref : SIT370
SEROGRAF MEDIUM SERIGRAPHIC
Ref : SEROG
SEROGRAF sérigraphic medium fast drying
CONTROLLER ATR902 FOR ELECTRIC KILN
Temperature controllers ATR902 - 12ABC with microprocessor
Ref : REGULATR902
Plug-in process controller 15 cycles / 18 steps
Plug-in process controller, multi-poles connector, single loop.
It enables the programming of 15 cycles/programs which might include anything up to 18 steps/segments, all free selectable by the operator as rising/dwell/cooling steps.
Distinctive feature is the extremely user-friendly programming, easy to handle even for the unskilled operator.
To adapt this regulation ATR902 on your oven, you will have to indicate us:
The maximum temperature of the oven
The type of the probe or thermocouple (S or K normally)
The power of your oven in KW
Caution!
Without the right parameters the control will not work properly.
Alternative socket 8 pôles for ATR900 (fixation on the kiln SBM-S)
Racking for controller ATR902 (or old ATR-900 and ATR-901)
Melting to lower the firing temperature - PR 32
Composed of Frit.
LEAD FREE CLEAR MELTING ENAMEL.
For the enameling of ceramic pieces in red or white clay.
Lead free fondant to add to enamels that need to increase fusibility.
Optimal firing temperature between 850-900ºC.
White enamel for undercoat - PR 120 BB
Composed of Frit.
For glazed tiles on the bisqueware.
Then apply a thin layer of transparent enamel.
The firing temperature varies between 960-1000ºC.
SHELVE REFRACTORY FOR RAKU KILN ROUND DIAM 396X15 MM 1260°C
REVERSE CURVE KNIFE WOOD HANDLE HT QUALITY PKP09
Steel potter knife inverted curve with wooden handle- PKP09
Anhydrous vanadium pentoxide
Pentoxyde de Vanadium anhydre
BROWN PIGMENT P99
Brown P99
Mass colourings 1300°C.
Pur colourings of the P range are used to color masses : Porcelain and white earthenware.
PIGMENT P35 GREEN-GREY
P set colouring oxides lik Pur.
Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
PIGMENT P32 OCEAN GREEN
Ceramic pigment ocean green P32
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
PIGMENT P314 / 4 FIRE RED
Ceramic pigment Fire red P314 / 4
CERAMIC PIGMENT P29 GREEN DEEP
Ceramic pigment Deep green P29
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
COLOURING OXIDE P209 GREEN ALMOND
Almond green P209
RED BROWN PIGMENT P161
Red brown P161
Ceramic pigment
P set colouring oxides lik Pur.
LAVENDER BLUE PIGMENT P12
lavender blue P12
P set colouring oxides lik Pur.
Natural ochre apricot pigment "6271" - OAB
Pigment from mineral origin. These are clays or rock which are finely grinded (ochres, clay, natural oxides).
They have a highly resistance to the light (inaltérability to ultraviolets rays), they also are non toxics.
Moreover, they have a high covering power and can be mixed between them.
GLAZE LUSTRER N3320 M/4 BRIGHT BLACK
Bright black
Ref : N3320M/4
Lustrer glazes with lead
Advice :
Temperature of firing : 980-990°C
Mentions :
Presence of lead. Use only for decorative products
Mono lead silicate enamel - MONOPB
Composed of Frit.
Transparent, shiny and melting enamel.
With lead.
MIRETTE 17CM INOX COUPANTE CRS1
Réf : CRS1
Longueur : 170 mm
CUTTING TOOL L 220 MM N°9
Simple ribbon tools L. 220 mm N°9 - MIR78
Ribbon tool N°10 - MIR52
Sculpting Tools
Red cadmium enamel - M7506
Intense red, opaque and shiny enamel.
For the enameling of ceramic pieces in red or white clay.
You can enamel by dipping or with a gun.
Recommended firing temperature between 960-1000ºC.
Glossy white enamel - M 5148
Composed of Frit.
Zircon Opaque White Enamel, lead free, which makes it suitable for all kinds of edible pottery.
Admits decoration very well. We recommend the use of lead-free pigments when the room to be decorated must contain food.
The firing temperature varies between 960-980ºC.
LOT OF 5 CALES 50 x 50 x 20 MM 1340°C
Ref : LOTCALE
Set of 9 double stainless steel tools 140 mm
Ref : KIT9OUTILSINOX
CORAL TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE403
Coral
Ref : GE403
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
Matte transparent enamel - G 1005
Composed of Frit.
Transparent satin zinc and lead enamel.
Can be easily colored.
One must take into account the fact that zinc oxide can be bad to develop certain oxides dyes.
We recommend applying it for white paste and thin layer to avoid opalescences.
The firing temperature varies between 950-1000ºC.
STAINLESS STEEL TOOLS FRI375 DOUBLE POINT ARROW AND SPATULA IN THE SHAPE OF ROUNDED SPOON L 155 MM
Double stainless steel tool
Arrow point with cutting edges for details and cutting on the other side small spatula curved spoon-shaped pointed and rounded for fine work on the ground
Non-slip handle
Total length 155 mm
Ref : FRI375
STAINLESS STEEL TOOLS FRI367 DOUBLE SCALPEL AND SPATULA L 160 MM
Double stainless steel tool
Cutting scalpel for details and cutting and small curved spatula for fine soil work
Anti-slip handle
Total length 160 mm
Ref : FRI367
Black partition F4312CD
This a set of specific glazes for the Cuerda Seca technic.
Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.
Inside these plans, you put glazes with brushes ou with syringe. Colors are used deluted with water to obtain a thick mix. CS200 is usable on red bisqueware : they are opaque.
CS set400 is usable on white or light medium : they are transparent.
All these colors can be mixed together excepted Red CS210 and Orange CS211.
Colors don't flow, even used in the vertical way.
Fiiring temperature : 940-1050°C
Soft stainless steel palette cocked 153 x 81 mm - EST313S
Soft stainless steel palette half rectangular 120 x 60 mm - EST309S
Soft stainless steel palette half-moon 120 x 50 mm - EST305S
Hard stainless steel palette half-oval 100 x 51 mm - EST303R
Shiny transparent glaze ES9008
Glazes for stoneware and porcelains
Temperature of firing : 1260-1300°C
Groupe I
Without lead
Dark blue - ES244
Temperature of firing : 950-1050°C
Groupe III
With lead
Liquid lilac engobe ready for use EGM62/001 underglaze
Firing temperature : 980-990°C°C
Without lead
LIQUID RED ENGOBE UNLEADED EGM57/003
Liquid red engobe ready for use EGM57/003
TURQUOISE BLUE LIQUID ENGOBE UNLEADED EGM53/004
Liquid blue engobe ready for use EGM53/004
Firing temperature : 980-990°C°C
Without lead
LIQUID ENAMEL WITH EESP42 GREEN EFFECT
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP41 EFFECT RED
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP40 EFFECT TURQUOISE GREEN
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
LIQUID ENAMEL WITH EESP33 YELLOW-ORANGE EFFECT
Opaque lead-free effect enamels
Group I: lead-free
Firing range 980 °C
Liquid glaze Speckled beige without lead EESP29
GROUPE I
Firing temperature: 980°C
Speckled white
GROUPE I
Firing temperature: 980°C
Speckled cream - EESP06
GROUPE I
Firing temperature: 980°C
Glittery black EESP01
Groupe I
Firing temperature: 980°C
Lead free spinach green cadmium enamel - EECS 11
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free marsala red cadmium enamel - EECS 05
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free red poppy cadmium enamel - EECS 04
Cadmium selenium effect.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
Lead free gold button cadmium enamel - EECS 01
Cadmium selenium effect, dark yellow.
Series of colored lead-free enamels of great intensity with a specific formulation.
They can be applied on any type of paste, white or red.
Suitable for decorating culinary pieces.
The application can be done by dipping, spraying or with a pear.
The recommended firing temperature is 980-1080°C.
It is recommended to fire these products at the appropriate temperature with a slow cycle, (> 5 h), and making a level at the end of firing.
High coefficient of expansion to be taken into account in order to avoid cracking.
These enamels require a thick coat.
ENGOBE GRES & PORCELAIN EASP12 AZURE BLUE
Azure blue stoneware & porcelain engobe - EASP12
Powder
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips :
Firing range 980 - 1280°C
Brush application, soaking or spraying.
Brown stoneware & porcelain engobe - EASP08
Collection suitable for single-firing (with addition of 5% Monocol V for the slip powder) and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
