All our products

TAKING PRE-WIRED FOR ATR902

Socket with cable

Taking pre-wired for ATR900 (with 6 numbered son 1.5m long) or for ATR902 (with 7 numbered son 1.5m long)

We can provide you taking pre-wired for ATR900 or ATR902

Alternative socket 8 pôles for ATR900 (fixation on the kiln SBM-S)

Racking for controller ATR902 (or old ATR-900 and ATR-901)

 PRESS RAM 23 T

23 ton press

Reference : PRESSRAM23T - RS6985

Gland special Glaz for spraygun SM/Pl and HS-25

6000 Additive mix

To make easier your mixing for the realisation of whitewash and stucco, Solargil propose you the PREDOSE, composed of different  additive, which will ease you the preparation.

Pink coloured porcelain - PRE

Smooth porcelain.

For throwing, modeling and jewelry.

12 colour.

Transparent lead-free powder enamel - PR99

Composed of Fritte.

For enamelling of white earthenware.

We can decorate under and on enamel.

Obtaining coloured enamels by adding dyes from the "P" series.

Firing temperature between 1000 and 1100ºC.

Bright white zircon enamel - PR 6303 F

Composed of Frit.

Bright opaque white enamel, lead free. Recommended for parts for food use.

For the enameling of ceramic pieces in red or white earth, especially those which must contain food.

Can be colored with natural oxides or calcined type P series. If the room must contain food, use lead-free dyes. The application can be done with a bath, brush, spray gun or screen printing.

Firing temperature between 1000-1020ºC where the enamel shows its best development.

Transparent glaze - PR500

Composed of Fritte.

Shiny transparent enamel without lead.

For enamelling of ceramic pieces in red or white clay.

Firing temperature between 950-1020ºC.

Transparent glaze - PR 47

Composed of Frit.

Shiny transparent enamel with a high amount of calcium.

Recommended as a base for producing colored enamels with coloring oxides compounds based on calcium, such as for example the base of (Cr, Sn, Ca).

Rutile base when looking for a lead enamel with a high melting viscosity which must be used at a temperature above 1000º C.

The firing temperature varies between 980-1050ºC.

Melting to lower the firing temperature - PR 32

Composed of Frit.

LEAD FREE CLEAR MELTING ENAMEL.

For the enameling of ceramic pieces in red or white clay.

Lead free fondant to add to enamels that need to increase fusibility.

Optimal firing temperature between 850-900ºC.

Glossy transparent enamel - PR233

Composed of Frit.

Glossy transparent enamel, lead free.

For glazing ceramic pottery pieces in red or white clay.

Firing temperature, between 950-1020ºC.