Français
Deutsch
Italiano
Español
Crystallized yellow 010275/2
Glazes for stonewares and porcelains.
GROUPE I
Firing temperature: 1250-1320°C
GLAZE FOR STONEWARE 010111 BRIGHT BROWN
PSL porcelain very white and very fine - PSL
Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002
ROUND METAL REFRACTORY SUPPORT Diam. 60 mm 1280°C
Simple refractory support Ø 60 H 17 mm n°49-60
Ref : SUP60MR
Single steel stilt Ø 60 H 17 mm n°49-60
LARGE MIRETTES SHORT LENGTH CUTTING WIRE H. 20 CM N ° 31
Coiled ribbon tools N°1 H 20 cm -
Ref : SC8
Complet kit Including, the probe type thermometer + K (1200 ° C) 250mm long + 3m compensating cable.
This kit comes fully assembled. Without batteries
AQUAMARINE BLUE TRANSPARENT GLAZE BIG THICKNESS UNLEADED : GE408
Blue aquamarine
Ref : GE408
Transparent glaze "big thickness" without lead.
For earthenware paste: Glazes from this range can be used as classical crackled glazes, so in a fine undercoat and for a firing at around 980°C.
For stoneware and porcelain paste already fired at high temperature: in order to create an effect of melted glass. Préparation of the glaze in high density and application in thick undercoat. If necessary, use the médium Sérograf instead of water. Firing at 980°C
Another possibilities: application on a bisqueware piece in hollow area or with edge of stoneware or porcelain paste.Firing at 1280 °C
Advice :
Firing temperature 950°C - 1280°C
COLOUR LEAD FREE CD03 BLUE TURQUOISE
Turquoise- CD03
Without lead
Firing temperature: 980-1280°C
Formula: Zr-V-Si
Yellow mustarde 010587 glaze
GROUPE I
Firing temperature: 1250-1300°C
Special white clay Raku grog 40% 0-0.5 mm - RAKUMITSU005
Plastic sieve with stainless steel mesh Ø 24 / 80 µ - TAMISB24
ROUND METAL REFRACTORY SUPPORT Diam. 50 mm 1260°C
Refractory round metal tripod T° 1260°C D 50 mm
Height 16mm - Diameter: 50mm
Ref : SUP50MR
Refractory metal stilts T° 1260°C D 50 mm
Transparent boro calcium enamel - PR1430
Transparent and glossy enamel, lead-free.
Orange coloured porcelain - PNT2
Smooth porcelain.
For throwing, modeling and jewelry.
12 colour.
CERAMIC PIGMENT P33 GREEN CELADON
celadon green P33
P set colouring oxides lik Pur. Range of colouring oxides to color glazes: 1to 5% in a transparent glaze ans 1 to 10% in a white glaze.
Hard stainless steel palette drop of water 69 x 36 mm - EST311R
Hard stainless steel palette half-moon 120 x 50 mm - EST305R
LIQUID ENGOBE FOR STONEWARE AND PORCELAIN EASP06L RED 250GR
Collection suitable for single-firing and dual-firing with maximum color development at 1280°C.
These engobes are available in liquid or powder.
At earthenware temperature, the colors will be more pastel than presented.
Tips /
Firing range 980 - 1280°C
Brush application, soaking or spraying.
DURCI'DUR® Red Classic Range - DDR1.5
Natural clay with hardener, for modeling that hardens to air without the need of firing.
Dries in 24-48h depending on the thickness to give realizations resistant to shocks.
European Standard Toys EN-71/3.
Don’t stain the hands.
Does not fire, does not enamel.
Available in several colours.
COLOUR LEAD FREE CD02 BLUE COBALT
Blue cobalt-CD02
Without lead
Firing temperature: 980-1280°C
Formula: Co-Si
Glaze Bright transparent 0302
Temperature of firing : 1200-1270°C
Groupe I
Lavender blue 010295
Glazes for stonewares and porcelains.
Temperature of firing : 1250-1300°C
LIQUID GLAZE ETSP01L TRANSPARENT BRIGHT WITHOUTLEAD 250GR
Transparent liquid glaze - ETSP01L
250GR
White earthenware grog 20% 0-0.5 - JASMIN05
Beige fire refractory stoneware for culinary use grog 30% 0-1 - GM76
Clay intented to withstand thermal shocks including direct flame (if fired at 1250°C minimum).
Adaptable to all production techniques.
Colour white-beige in oxidation and grey in reduction.
Red stoneware Brasil grog 40% 0-0,2 mm - BRASIL002
Groged
REFRACTORY PILLAR H 300 mm Diam.43 mm 1350°C
Pillars - Props
Temp 1350 ° C - H 300mm Ø 43mm
Fragile material, can not be sent by post.
Electronic Potter's wheel "LITTLE FROG" model TY16
Potter's wheel for pottery initiation.
Power 380 W in 220 Volt monophase (usual plug)
