Best sellers

COLOR D05 BROWN CHOCOLATE

Chocolate brown D05

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing Température 950-1250°C

Formula: Zn-Fe-Cr-Al

Red brown D04

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes : between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis.

Firing Température 950-1250°C

Formula: Zn-Al-Cr-Fe

Deep yellow ochre D01

Colors to paint D Set.

These products are a range of a very fine colouring oxides with the fondant incorporated in the formula.
Possibility to mix them to change the shades.

Usable under glaze or on it.

Can be used to color the glazes :between 4 and 9% in a transparent glaze and between 6 and 15 % in a white basis

Firing température 950-1250°C

Formula: Zr-Si-Fe-Pr-Zn

Forged steel modelling double-end tool stainless steel for clay 17.8 cm - CULT1424

Forged steel modelling tool iron L. 17.5 cm - CULT1412

Classical sculpture tool for clay, wax, ceramic, etc... L. 25 cm - CT1114

Matt light pink opaque enamel - CSM 118

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt black opaque enamel - CSM 117

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Matt water green opaque enamel - CSM 112

This is a collection of matt colored enamels prepared for the "cuerda seca" technique.

CSM-100 series matt enamels for cuerda seca can be used for white and red paste.

The recommended firing temperature is 980ºC-1000ºC.

Opaque glaze with effect Chattered cream CS6040

Advice :

Temperature of firing : 980-1020°C                       

Dilation coeff 25-300°C : 62

Mentions :

Presence of lead. Possibility to use for alimentary production under conditions

Blue green CS476

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II

Green CS446

This is a set of specific glazes for the Cuerda Seca technic.

Black F4312 and White F4313 are powders to mix with Copaïva balm to draw partitions.

Inside these plans, you put glazes with brushes ou with syringe.

Colors are used deluted with water to obtain a thick mix.

CS200 is usable on red bisqueware : they are opaque.

CS set400 is usable on white or light medium : they are transparent.

All these colors can be mixed together except Red CS210 and Orange CS211.

Colors don't flow, even used in the vertical way.

Firing temperature : 980°C

GROUPE II